DIN 6912 Hexagon Socket Head Cap Screws, Low Head with Collar
DIN 6912 low-head hexagon socket cap screws with centre collar, M4 to M36 — the low head that still seats like a hex bolt, with a raised collar for through-hole location — with the full collected 18-size table: thread pitch, thread length per length class, collar diameter, head and shank tolerances, socket and collar-hole depths.
Last updated: 2026-11
Specifications
DIN 6912 is the low-head socket screw with a mechanical bonus: a cylindrical collar (described as "with centre" in the original designation) that projects below the head around the shank. The collar locates the screw in a through-hole, absorbs the shear at the joint interface, and keeps the reduced-height head off the clamped surface — so the screw behaves like a fitted bolt whose head still clears a shallow counterbore. That combination fixes its typical roles: hinge and pivot pins that must not shear through the screw shank, sliding location in fixture builds, and any joint where the head height of a DIN 912 does not fit but the load path still runs through a located, sheared interface. The collected table is the largest of this batch — the full M4 to M36 ladder across five size blocks, eighteen sizes with the non-preferred (M14), (M18), (M22), (M27) and (M33) — and tabulates per size: pitch P; thread length b in three length classes; collar diameter d 1 min (= nominal)/max; head diameter d k max/min; head height k max/min; socket depth t nominal/min/max; collar hole depth t 1 min/max — the counterbore depth the collar needs; socket across-flats s nominal/min/max; shank d s max/min; and across-corners e min. Sizing a DIN 6912 joint means sizing the mating hole: the collar tolerance band runs from nominal upward (d 1 min = nominal, max e.g. 8.09 on M16), and the t 1 column tells the shop how deep the relief hole must go.
| Standard | DIN 6912 — hexagon socket head cap screws, low head, with centre (collar) |
|---|---|
| Series | M4–M36: M4, M5, M6, M8, M10, M12, (M14), M16, (M18), M20, (M22), M24, (M27), M30, (M33), M36 — parenthesized sizes are non-preferred |
| Defining feature | Cylindrical collar under the low head (d 1 tabulated per size) — locates the screw in a through-hole and carries joint shear like a fitted bolt |
| Tabulated geometry | Per size: pitch P, thread length b per length class, collar dia d 1 min/max, head dia d k max/min, head height k max/min, socket depth t nominal/min/max, collar hole depth t 1 min/max, socket s nominal/min/max, shank d s max/min, across-corners e min |
| Materials / strength | Not tabulated by the collected specification — per RFQ (property class and stainless grade per drawing callout) |
| Nominal thread | P — pitch (mm) | b, L ≤ 125 (mm) | b, 125 < L ≤ 200 (mm) | b, L > 200 (mm) | d 1 min (= nominal) (mm) | d 1 max (mm) | d k max (= nominal) (mm) | d k min (mm) | k max (= nominal) (mm) | k min (mm) | t nominal (mm) | t min (mm) | t max (mm) | t 1 min (mm) | t 1 max (mm) | s nominal (mm) | s min (mm) | s max (mm) | d s max (= nominal) (mm) | d s min (mm) | e min (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| M4 | 0.7 | 14 | / | / | 2 | 2.06 | 7 | 6.78 | 2.8 | 2.66 | 1.6 | 1.48 | 1.72 | 3.3 | 3.6 | 3 | 3.02 | 3.1 | 4 | 3.82 | 3.44 |
| M5 | 0.8 | 16 | / | / | 2.5 | 2.56 | 8.5 | 8.28 | 3.5 | 3.32 | 2 | 1.88 | 2.12 | 4 | 4.3 | 4 | 4.02 | 4.12 | 5 | 4.82 | 4.58 |
| M6 | 1 | 18 | / | / | 3 | 3.06 | 10 | 9.78 | 4 | 3.82 | 2.5 | 2.38 | 2.62 | 5 | 5.3 | 5 | 5.02 | 5.14 | 6 | 5.82 | 5.72 |
| M8 | 1.25 | 22 | / | / | 4 | 4.075 | 13 | 12.73 | 5 | 4.82 | 3 | 2.88 | 3.12 | 6.5 | 6.86 | 6 | 6.02 | 6.14 | 8 | 7.78 | 6.86 |
| M10 | 1.5 | 26 | 32 | / | 5 | 5.075 | 16 | 15.73 | 6.5 | 6.28 | 3.5 | 3.35 | 3.65 | 7.5 | 7.86 | 8 | 8.025 | 8.175 | 10 | 9.78 | 9.15 |
| M12 | 1.75 | 30 | 36 | / | 6 | 6.075 | 18 | 17.73 | 7.5 | 7.28 | 4 | 3.85 | 4.15 | 9 | 9.36 | 10 | 10.025 | 10.175 | 12 | 11.73 | 11.43 |
| (M14) | 2 | 34 | 40 | / | 7 | 7.09 | 21 | 20.67 | 8.5 | 8.28 | 4.5 | 4.35 | 4.65 | 10 | 10.36 | 12 | 12.032 | 12.212 | 14 | 13.73 | 13.72 |
| M16 | 2 | 38 | 44 | 57 | 8 | 8.09 | 24 | 23.67 | 10 | 9.78 | 5.5 | 5.35 | 5.65 | 11.5 | 11.93 | 14 | 14.032 | 14.212 | 16 | 15.73 | 16 |
| (M18) | 2.5 | 42 | 48 | 61 | 8 | 8.09 | 27 | 26.67 | 11 | 10.73 | 6 | 5.85 | 6.15 | 12.5 | 12.93 | 14 | 14.032 | 14.212 | 18 | 17.73 | 16 |
| M20 | 2.5 | 46 | 52 | 65 | 10 | 10.09 | 30 | 29.67 | 12 | 11.73 | 6.5 | 6.32 | 6.68 | 14 | 14.43 | 17 | 17.05 | 17.23 | 20 | 19.67 | 19.44 |
| (M22) | 2.5 | 50 | 56 | 69 | 10 | 10.09 | 33 | 32.61 | 13 | 12.73 | 7 | 6.82 | 7.18 | 15 | 15.43 | 17 | 17.05 | 17.23 | 22 | 21.67 | 19.44 |
| M24 | 3 | 54 | 60 | 73 | 12 | 12.11 | 36 | 35.61 | 14 | 13.73 | 7 | 6.82 | 7.18 | 16 | 16.43 | 19 | 19.065 | 19.275 | 24 | 23.67 | 21.73 |
| (M27) | 3 | 60 | 66 | 79 | 12 | 12.11 | 40 | 39.61 | 16 | 15.73 | 8.5 | 8.32 | 8.68 | 17 | 17.43 | 19 | 19.065 | 19.275 | 27 | 26.67 | 21.73 |
| M30 | 3.5 | 66 | 72 | 85 | 15 | 15.11 | 45 | 44.61 | 17.5 | 17.23 | 9 | 8.82 | 9.18 | 19 | 19.52 | 22 | 22.065 | 22.275 | 30 | 29.67 | 25.15 |
| (M33) | 3.5 | 72 | 78 | 91 | 16.5 | 16.61 | 50 | 49.61 | 19.5 | 19.17 | 10 | 9.82 | 10.18 | 20 | 20.52 | 24 | 24.065 | 24.275 | 33 | 32.61 | 27.43 |
| M36 | 4 | 78 | 84 | 97 | 18 | 18.11 | 54 | 53.54 | 21.5 | 21.17 | 11.5 | 11.28 | 11.72 | 24 | 24.52 | 27 | 27.065 | 27.275 | 36 | 35.61 | 30.85 |
| Length (mm) | Weight kg/1000 pcs — M4 | Weight kg/1000 pcs — M5 | Weight kg/1000 pcs — M6 | Weight kg/1000 pcs — M8 | Weight kg/1000 pcs — M10 | Weight kg/1000 pcs — M12 | Weight kg/1000 pcs — M14 | Weight kg/1000 pcs — M16 | Weight kg/1000 pcs — M18 | Weight kg/1000 pcs — M20 | Weight kg/1000 pcs — M22 | Weight kg/1000 pcs — M24 | Weight kg/1000 pcs — M27 | Weight kg/1000 pcs — M30 | Weight kg/1000 pcs — M33 | Weight kg/1000 pcs — M36 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 10 | 1.3 | 2.2 | 3.6 | |||||||||||||
| 12 | 1.5 | 2.5 | 3.9 | 7.7 | ||||||||||||
| 16 | 1.9 | 3.1 | 4.5 | 8.8 | 15.5 | 22.3 | ||||||||||
| 20 | 2.3 | 3.7 | 5.2 | 10.2 | 17.9 | 25.5 | 37.9 | 52.5 | ||||||||
| 25 | 2.7 | 4.4 | 6.2 | 12.5 | 20.2 | 29.5 | 42.5 | 56.5 | 77.0 | |||||||
| 30 | 3.2 | 5.1 | 7.3 | 14.0 | 22.0 | 32.5 | 48.0 | 63.0 | 84.6 | 108 | ||||||
| 35 | 3.4 | 5.8 | 8.3 | 15.7 | 25.5 | 36.5 | 53.0 | 69.7 | 93.3 | 118 | ||||||
| 40 | 4.2 | 6.6 | 9.5 | 17.5 | 28.5 | 40 | 58.0 | 78.7 | 102 | 128 | 185 | |||||
| 50 | 5.2 | 7.3 | 11.5 | 21.5 | 34.8 | 48 | 69.5 | 91.5 | 119 | 150 | 215 | |||||
| 60 | 9.0 | 13.6 | 25.3 | 40.3 | 57 | 82.0 | 107 | 138 | 172 | 245 | 263 | |||||
| 70 | 15.7 | 29.1 | 46.0 | 65 | 92.5 | 122 | 157 | 196 | 275 | 298 | 445 | 498 | ||||
| 80 | 32.8 | 52.5 | 72 | 104 | 140 | 178 | 222 | 305 | 333 | 490 | 552 | 793 | ||||
| 90 | 57.8 | 80 | 116 | 154 | 196 | 245 | 335 | 369 | 535 | 607 | 860 | 1000 | ||||
| 100 | 88 | 127 | 169 | 215 | 269 | 365 | 407 | 580 | 662 | 927 | 1080 | |||||
| 110 | 139 | 183 | 235 | 292 | 395 | 439 | 625 | 717 | 994 | 1160 | ||||||
| 120 | 151 | 198 | 255 | 316 | 425 | 474 | 670 | 772 | 1060 | 1240 | ||||||
| 130 | 212 | 275 | 342 | 455 | 510 | 715 | 827 | 1130 | 1320 | |||||||
| 140 | 226 | 295 | 368 | 485 | 545 | 760 | 880 | 1190 | 1400 | |||||||
| 150 | 315 | 394 | 515 | 580 | 805 | 940 | 1250 | 1470 | ||||||||
| 160 | 422 | 545 | 616 | 850 | 990 | 1320 | 1550 | |||||||||
| 170 | 448 | 575 | 651 | 895 | 1050 | 1380 | 1630 | |||||||||
| 180 | 474 | 605 | 687 | 940 | 1100 | 1450 | 1710 | |||||||||
| 190 | 635 | 722 | 995 | 1160 | 1510 | 1790 | ||||||||||
| 200 | 665 | 758 | 1030 | 1210 | 1580 | 1870 |
- Row 1 (10): Column alignment note (batch-level, anchored here): the 16 weight columns align one-to-one to the source header sizes (M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M22, M24, M27, M30, M33, M36); verified against the rendered grid (rowspan/colspan expanded) and the monotone per-size weight progressions, not inferred from the flattened markup alone. The first grid row is a lone "Length" section label, carried as the first-column semantics.
Materials
- Material, property class and finish specified per RFQ — the collected specification table covers geometry only
Ordering & documentation
Documents
Shipments of DIN 6912 Hexagon Socket Head Cap Screws, Low Head with Collar are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 6912 Hexagon Socket Head Cap Screws, Low Head with Collar orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 6912 Hexagon Socket Head Cap Screws, Low Head with Collar), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for din 6912 hexagon socket head cap screws, low head with collar is 10,000 pieces (applies to the standard sizes and finishes for din 6912 hexagon socket head cap screws, low head with collar; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 6912 hexagon socket head cap screws, low head with collar run 3–7 days. Quantities or variants of din 6912 hexagon socket head cap screws, low head with collar outside the standard range are confirmed at quotation.
Storage & shipping
DIN 6912 Hexagon Socket Head Cap Screws, Low Head with Collar are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 6912 hexagon socket head cap screws, low head with collar dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
When does the DIN 6912 collar matter compared with plain DIN 7984?
Wherever the joint carries shear or needs positive location through the head side. The collar is a turned pilot that enters the clamped part: it positions the screw, takes lateral load off the shank threads, and lets a low head sit over a through-hole without bearing on the part. DIN 7984 is the plain low head without that pilot; if the mating parts are located by other means and the screw only clamps, the plain low head does the job — the collected tables of both pages line up thread-for-thread where the series overlap.
What should an RFQ for DIN 6912 screws state?
The designation, thread size and length (with the applicable b length class — tabulated per L ≤ 125 / 125 < L ≤ 200 / L > 200 mm), property class or stainless grade, finish, certificates such as a mill test report per EN 10204 3.1, and quantity per size. If the collar holes are being machined with the order, size them from the d 1 and t 1 columns on this page. Commercial terms follow the quotation.
What is the MOQ and lead time for these screws?
Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 6912 Hexagon Socket Head Cap Screws, Low Head with Collar inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your DIN 6912 Hexagon Socket Head Cap Screws, Low Head with Collar
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support