ISO 1481 Slotted Pan Head Tapping Screws

ISO 1481 slotted pan head tapping screws ST 2,2 to ST 9,5 — the classic slotted pan sheet-metal screw, with the collected full geometry ladder and the trade-size availability matrix per thread.

Last updated: 2026-11

Request a Quote

ISO 1481 Slotted Pan Head Tapping Screws in an industrial setting
Illustrative image redrawn from real ISO 1481 Slotted Pan Head Tapping Screws product references — not a photograph of stocked items.

Specifications

ISO 1481 is the oldest-looking member of the tapping family and still the most common in maintenance work: a rounded pan head over a single slot, driving with a plain flat blade. The dome spreads the clamping load over a wider footprint than a countersunk head and needs no countersink prep — drop it into a plain hole and let the thread roll. The collected table runs ST 2,2 to ST 9,5 (the largest ST size in this batch) with the full geometry set: body diameter da, head diameter dk max./min., head height k max./min., slot width n in its nominal/max./min. triple, pan radius rf, slot depth t and slot-base width w minimums, and the y Type C/F thread-end allowances. The trade-size matrix marks which length/thread combinations the standard offers — l 4,5 to 50, with "+" in the source's own notation — so availability, not geometry, is the real constraint when substituting. Slotted heads tolerate paint-fouled sockets and hand driving but cam out under power torque; that limitation is mechanical reality, not a spec. Property class, material and finish are not tabulated by the collected specification — per RFQ.

Standard ISO 1481 — tapping screws, slotted pan head
Size range ST 2,2 – ST 9,5 (largest size in the collected ladder)
Head geometry dk max. 4 → 20 mm; k max. 1,3 → 6; rf approx. 0,6 → 3
Slot n nominal 0,5 → 2,5; t min. 0,5 → 2,4; w min. 0,5 → 2,4
Thread-end allowance y Type C 2 → 8 / Type F 1,6 → 4,2 per size
Trade sizes l 4,5 – 50 availability matrix, "+" marks the source's offered pairs
Material / finish Not tabulated by the collected specification — per RFQ
ISO 1481 slotted pan head tapping screws - attribute rows per thread size (ST 2,2 - ST 9,5)All dimensions in millimetres. Attribute labels follow the source: P = thread pitch, a = thread end length, da = body diameter, dk = head diameter, k = head height, n = slot width, r = transition radius, rf = pan-head radius, t = slot depth, w = slot base width, y = thread-end shear allowance by tapping-screw type (Type C / Type F). Limit words (max./min./nominal/approx.) are the source's own.
AttributeLimitST 2,2ST 2,9ST 3,5ST 4,2ST 4,8ST 5,5ST 6,3ST 8ST 9,5
P0,81,11,31,41,61,81,82,12,1
amax.0,81,11,31,41,61,81,82,12,1
damax.2,83,54,14,95,56,37,19,210,7
dkmax.45,6789,511121620
dkmin.3,75,36,67,69,110,611,615,619,5
kmax.1,31,82,12,433,23,64,86
kmin.1,11,61,92,22,72,93,34,55,7
nnominal0,50,811,21,21,61,622,5
nmax.0,711,21,511,511,911,912,312,81
nmin.0,560,861,061,261,261,661,662,062,56
rmin.0,10,10,10,20,20,250,250,40,4
rfapprox.0,60,811,21,51,61,82,43
tmin.0,50,70,811,21,31,41,92,4
wmin.0,50,70,80,91,21,31,41,92,4
yType C22,63,23,74,3567,58
yType F1,62,12,52,83,23,63,64,24,2
ISO 1481 trade sizes ladder - nominal length with Type C / Type F limits and availability per thread (l 4,5 - 50)All dimensions in millimetres. "+" marks the source's trade-size availability for that length/thread pair (the source's own marker, kept verbatim); blank = not offered by the source.
NominalType C min.Type C max.Type F min.Type F max.ST 2,2ST 2,9ST 3,5ST 4,2ST 4,8ST 5,5ST 6,3ST 8ST 9,5
4,53,75,33,74,5+
6,55,77,35,76,5+++
9,58,710,38,79,5+++++
1312,213,812,213+++++++
1615,216,815,216+++++++++
1918,219,818,219++++++++
2221,222,820,722+++++++
2524,225,823,725++++++
3230,733,330,732+++++
3836,739,336,738+++
4543,746,343,545++
5048,751,348,550++

Materials

  • Material and finish specified per RFQ — case-hardened carbon steel is the standard tapping body; state the host sheet and any plated/zinc finish requirement at quotation

Ordering & documentation

Documents

Shipments of ISO 1481 Slotted Pan Head Tapping Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 1481 Slotted Pan Head Tapping Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 1481 Slotted Pan Head Tapping Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for iso 1481 slotted pan head tapping screws is 10,000 pieces (applies to the standard sizes and finishes for iso 1481 slotted pan head tapping screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 1481 slotted pan head tapping screws run 3–7 days. Quantities or variants of iso 1481 slotted pan head tapping screws outside the standard range are confirmed at quotation.

Storage & shipping

ISO 1481 Slotted Pan Head Tapping Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 1481 slotted pan head tapping screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

The trade-size matrix shows blanks — what does a blank mean for my order?

That length/thread pair is simply not a standard trade size. The "+" marks in the collected matrix are the standard's offered combinations: an ST 6,3 screw exists at l 13 and up, never at l 4,5, and the long lengths (l 45/50) appear only at ST 8/ST 9,5 where the shank can physically carry them. When a job lands between offered pairs, the honest options are the nearest offered length (the Type C/F min./max. tolerance bands — e.g. l 16 runs 15,2–16,8 — give a little latitude on both sides) or a different tapping form with its own matrix. Do not read a blank as "unavailable anywhere": this matrix is what the collected standard offers, and outsourced supply can source off-standard lengths — confirm the actual availability at quotation. Geometry across the family is otherwise fixed by the attribute table, so a nearest-length substitution does not change head or thread dimensions.

What is the MOQ and lead time for ISO 1481 Slotted Pan Head Tapping Screws?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 1481 Slotted Pan Head Tapping Screws state?

State the full designation (ISO 1481), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 1481 Slotted Pan Head Tapping Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ISO 1481 Slotted Pan Head Tapping Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.