BS 916 Hexagon Head Screws with B.S. Threads (1953, Table 1)

BS 916-1953 table 1 hexagon head screws with British Standard threads: threads per inch, across flats and corners, fillet radius and head height across the B.S. size ladder — the black/hex general engineering screw of the Whitworth era.

Last updated: 2026-11

Request a Quote

BS 916 Hexagon Head Screws with B.S. Threads (1953, Table 1) in an industrial setting
Illustrative image redrawn from real BS 916 Hexagon Head Screws with B.S. Threads (1953, Table 1) product references — not a photograph of stocked items.

Specifications

BS 916 is the general-engineering hexagon head screw standard of the British thread era, and the collected table 1 carries a 15-size ladder (the two thread-count rows run 20 down to 2.5 TPI across the range) with across flats s max/min (0.445/0.435 at the smallest to 9.450/9.325 at the largest — the ladder reaching very large diameters by modern standards), across corners e max/min (0.435 upward to 10.91 max), fillet radius R, and head height k max/min (1.27/1.17 climbing to 4.20/4.00 in its later rows). The collected page prints no size-designation header row — sizes are carried by the thread-count and s rows, read vertically. This is the coarse "black bolt of the hex screw world" identity for heritage British plant: coarser geometry and wider tolerances than BS 1083 precision screws, on the same B.S. thread systems.

Standard / scope BS 916-1953 table 1 — hexagon head screws with B.S. threads (BSW/BSF series), 15 sizes as tabulated; no printed size headers (sizes carried by the TPI and s rows, read vertically)
Threads per inch 20, 18, 16, 14, 12, 12, 11, 10, 9, 8, 7, 7, 6, 6, 5... down to 2.5 — B.S. ladder as printed, one '/' cell carried verbatim
Width across flats s Max/min: 0.445/0.435 (smallest) to 9.450/9.325 in — the ladder extends into very large diameters
Width across corners e Max/min: 0.435... to 10.91 max as printed
Head height k / fillet R k max/min 1.27/1.17 to 4.20/4.00 in its later rows; R per size
Not tabulated Strength, lengths, finishes — per RFQ
BS 916-1953 hexagon head screws with B.S. threads, table 1 — by size (table 1 of 1)Inch (B.S.W./B.S.F. series). Attribute-label table (3 columns, notes as printed) positionally paired with two 15- and 14-column grids; rows aligned by row count, columns concatenated, values untouched. No printed size headers — sizes carried by the grids' size rows.
AttributeSub-labelNote
PPPPNo. of Threads/Inch2018161412121110987766554.5443.53.53.253.25332.8752.752.6252.5
ss0.4450.5250.6000.7100.8200.9201.0101.2001.3001.4801.6701.8602.0502.2202.4102.5802.7603.1503.5503.8904.1804.5304.8505.1805.5506.3807.3008.3509.450
ss0.4350.5150.5850.6950.8000.9000.9851.1751.2701.4501.6401.8152.0052.1752.3652.5202.7003.0903.4903.8304.0804.4304.7505.0805.4506.2557.1758.2259.325
ee0.510.610.690.820.951.061.171.391.501.711.932.152.372.562.782.983.193.644.104.494.835.235.605.986.417.378.439.6410.91
RR1/321/321/321/321/323/643/643/641/161/161/81/81/81/81/81/81/83/163/163/163/161/41/41/41/41/41/41/41/4
kk0.1860.2280.2700.3120.3630.4050.4470.5300.6230.7060.790.890.981.061.181.271.431.601.771.932.152.322.482.652.823.203.533.874.20
kk0.1660.2080.2500.2920.3330.3750.4170.5000.5830.6660.750.830.921.001.081.171.331.501.671.832.002.172.332.502.673.003.333.674.00
  • Identity note: the acquisition filename reads DIN 97 (wood screws) but the page prints BS 916-1953 hexagon head screws (detail.php sid=MjczMA==); identity taken from the page title.

Materials

  • BS 916 screws are the general black/self-colour hex supply of the Whitworth era — coarser than BS 1083 precision screws and used where appearance and tight tolerances were not the point. As maintenance stock they survive wherever old British general engineering plant still runs; the large-diameter end of the ladder (the inch-wide and bigger sizes) is the range most often needed for restoration and least often held in stock, so quote it with lead-time expectation. Confirm BSW vs BSF by thread gauge as with all B.S. hardware

Ordering & documentation

Documents

Shipments of BS 916 Hexagon Head Screws with B.S. Threads (1953, Table 1) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for BS 916 Hexagon Head Screws with B.S. Threads (1953, Table 1) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (BS 916 Hexagon Head Screws with B.S. Threads (1953, Table 1)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for bs 916 hexagon head screws with b.s. threads (1953, table 1) is 10,000 pieces (applies to the standard sizes and finishes for bs 916 hexagon head screws with b.s. threads (1953, table 1); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for bs 916 hexagon head screws with b.s. threads (1953, table 1) run 3–7 days. Quantities or variants of bs 916 hexagon head screws with b.s. threads (1953, table 1) outside the standard range are confirmed at quotation.

Storage & shipping

BS 916 Hexagon Head Screws with B.S. Threads (1953, Table 1) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store bs 916 hexagon head screws with b.s. threads (1953, table 1) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

How does BS 916 differ from BS 1083 for the same B.S. thread size?

Precision versus general engineering. BS 1083 screws are washer-faced with tighter geometric tolerances; BS 916 screws are the broader-tolerance general version — same thread system, coarser head control, no washer face requirement. In a restoration the visible difference is the bearing face and the finish of the head; functionally the thread is the same family, so the two interchange only where the joint tolerates the coarser seat. This table's larger size range is its practical advantage: BS 916 covers the very large diameters the precision ladder does not, which is why plant restoration keeps both standards on the shelf.

The table has no size headers — how are sizes identified?

The collected page prints the thread-count row (TPI) and the across-flats row as the identifying ladders — read each column vertically: TPI, then s max/min, then e, R and k. A "3/8 BSW" is the column whose TPI reads 16 and whose s matches the 3/8-inch across-flats ladder. The batch anomalyFlags also note the single "/" cell where the source leaves a thread count untabulated. As always with B.S. hardware, verify the physical part against a thread gauge before assembly — the designation, not the column position, is what the order carries.

What is the MOQ and lead time for BS 916 Hexagon Head Screws with B.S. Threads (1953, Table 1)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for BS 916 Hexagon Head Screws with B.S. Threads (1953, Table 1) state?

State the full designation (BS 916 Hexagon Head Screws with B.S. Threads (1953, Table 1)), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your BS 916 Hexagon Head Screws with B.S. Threads (1953, Table 1) inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your BS 916 Hexagon Head Screws with B.S. Threads (1953, Table 1)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.