DIN 653 Knurled Thumb Screws, Low Type

DIN 653 thumb screws with low knurled head, M1 to M10 — the shallow-profile fingertip screw for clearance-limited adjustments — with the full collected 12-size table: low head geometry, knurl pitch and reference lengths.

Last updated: 2026-11

Request a Quote

DIN 653 Knurled Thumb Screws, Low Type in an industrial setting
Illustrative image redrawn from real DIN 653 Knurled Thumb Screws, Low Type product references — not a photograph of stocked items.

Specifications

DIN 653 keeps the knurled cylindrical head of DIN 464 and cuts its height roughly in half: the same fingertip-gripping knurl on a low-profile head for places where a full thumb screw would stand proud of the surface, catch passing parts or need clearance the assembly does not have. The trade is grip height — fingers ride the knurl directly rather than wrapping a taller head — so the low type is the choice where adjustment is frequent but torque is modest: latch panels, covers, optical and instrument fixtures, set-and-leave presets. The collected table runs M1 to M10 and tabulates per size: the knurled head diameter d k with nominal and limit bands, the low head height k (2 mm max at M1.6 against DIN 464’s 5.3 mm nominal at the same thread), the slot width n and depth t, chamfer c, a reference length L that scales with the thread, and the knurl pitch. Where head height is not the constraint, the taller DIN 464 gives more finger purchase for the same thread. Materials, property classes and finishes are not printed by the collected specification and follow the drawing callout.

Standard DIN 653 — knurled thumb screws, low type (slotted low cylindrical head, straight knurl)
Series M1 – M10 (12 sizes tabulated)
Tabulated geometry Per size: pitch P, chamfer a max, chamfer c, knurled head diameter d k (Nominal / max / min), shank d s (max / min), hex-relevant e, head height k (max / min), fillet r, reference length L, knurl pitch
Dimensions at M3 Head d k nominal 12 (max 12.35 / min 11.65); head height k max 2.5 / min 2.25; slot n nominal 0.8; reference length L 12; knurl pitch 0.6
Dimensions at M6 Head d k nominal 24 (max 24.42 / min 23.58); head height k max 5 / min 4.7; slot n nominal 1.6; reference length L 20; knurl pitch 0.6
Head / drive form Low knurled cylindrical head — reduced height against DIN 464, same knurl principle
Materials / strength Not tabulated by the collected specification — per RFQ (property class and finish per drawing callout)

Materials

  • Material, property class and finish specified per RFQ — the collected specification table covers geometry only

Ordering & documentation

Documents

Shipments of DIN 653 Knurled Thumb Screws, Low Type are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 653 Knurled Thumb Screws, Low Type orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 653 Knurled Thumb Screws, Low Type), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 653 knurled thumb screws, low type is 10,000 pieces (applies to the standard sizes and finishes for din 653 knurled thumb screws, low type; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 653 knurled thumb screws, low type run 3–7 days. Quantities or variants of din 653 knurled thumb screws, low type outside the standard range are confirmed at quotation.

Storage & shipping

DIN 653 Knurled Thumb Screws, Low Type are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 653 knurled thumb screws, low type dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

DIN 464 or DIN 653 — how does head height decide?

Compare the height columns at the same thread: at M2.5 the collected tables print a nominal head height around 6.5 mm for DIN 464 against a 2.5 mm maximum for DIN 653 — a third of the profile for the same grip diameter d k. So the decision is grip style versus clearance. DIN 464’s taller head lets fingers wrap and twist, which moves higher torque and suits frequently opened covers; DIN 653 relies on fingertip traction on the knurl alone, and buys for that a head that stays nearly flush in tight stacks, sliding covers and rotating adjustments where any protrusion would foul. Both carry the same slot for a blade, so neither gives up tool tightening — the low type simply needs the driver for the last bit of torque the fingers cannot reach.

What is the MOQ and lead time for these screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for DIN 653 Knurled Thumb Screws, Low Type?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 653 Knurled Thumb Screws, Low Type state?

State the full designation (DIN 653), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 653 Knurled Thumb Screws, Low Type inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your DIN 653 Knurled Thumb Screws, Low Type
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.