DIN 963 Slotted Countersunk Machine Screws

Slotted countersunk head screws per DIN 963 — current norm DIN EN ISO 2009 — M1 to M20 in steel class 4.8, A2/A4 stainless, brass or plastic, thread 6g. The flush-head machine screw for slotted-driver tooling and fine instrument work.

Last updated: 2026-11

Request a Quote

DIN 963 Slotted Countersunk Machine Screws in an industrial setting
Illustrative image redrawn from real DIN 963 Slotted Countersunk Machine Screws product references — not a photograph of stocked items.

Specifications

The slotted countersunk machine screw is the oldest flush fastener still in volume service: a 90° conical head with a single slot, seated flush in a prepared countersink and driven by a flat-blade screwdriver. The collected standard table runs M1 through M20 — the widest thread span of the machine-screw family, reaching down to M1 for instrument work — in steel class 4.8, A2/A4 stainless, brass or plastic (Pa), thread tolerance 6g. At M4 the head seats at 7.5 mm maximum diameter with a 2.2 mm head height and a 0.8 mm slot; at M5 the seat grows to 9.2 mm with a 2.5 mm height. DIN 963's current norm is DIN EN ISO 2009. Choose it where the driver infrastructure is slotted — watchmaker and instrument assemblies, restoration work, electrical terminals — and accept its known limit: the slot gives the driver no centring, so it is not the fastener for torque-critical or high-speed driven joints; the cross recessed counterpart is DIN 965/ISO 7046.

Standard DIN 963 — slotted countersunk head screw; current norm DIN EN ISO 2009
Size range M1 – M20
Dimensions at M4 dk (head diameter) nominal=max 7.5 mm (min 7.14 mm); k (head height) max 2.2 mm; n (slot width) nominal 0.8 mm (max 0.96 mm); P 0.7 mm
Dimensions at M5 dk nominal=max 9.2 mm (min 8.84 mm); k max 2.5 mm; n nominal 1.2 mm
Strength / materials Steel 4.8; stainless A2, A4; brass; plastic (Pa)
Thread 6g
dk at M4 nominal=max 7,5 (min 7,14)
k at M4 max 2,2
n at M4 nominal 0,8 (max 0,96)
P at M4 0,7
dk at M5 nominal=max 9,2 (min 8,84)
k at M5 max 2,5
n at M5 nominal 1,2
Collected specification records
Grade Field Recorded value
machine-screw Thread definition Uniformly threaded; designed to thread into likewise uniformly threaded nuts or tapped holes; nominal diameter 1/4 in or less

Industry reference — figures as printed in the collected technical tables; availability confirmed per quotation.

Materials

  • Steel
  • Stainless steel
  • Brass
  • Plastic

Ordering & documentation

Documents

Shipments of DIN 963 Slotted Countersunk Machine Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 963 Slotted Countersunk Machine Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 963 Slotted Countersunk Machine Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 963 slotted countersunk machine screws is 10,000 pieces (applies to the standard sizes and finishes for din 963 slotted countersunk machine screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 963 slotted countersunk machine screws run 3–7 days. Quantities or variants of din 963 slotted countersunk machine screws outside the standard range are confirmed at quotation.

Storage & shipping

DIN 963 Slotted Countersunk Machine Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 963 slotted countersunk machine screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Slotted or cross recessed countersunk — where does the slot still make sense?

Where the screw is set once by hand and looked at afterwards. The slot is serviceable with any flat blade, survives cleaning and refinishing, and is the traditional callout in instruments, electrical terminals, optical mounts and restoration work — and the M1–M20 span of the collected DIN 963 table reaches sizes the cross recessed lines do not. The costs are torque and speed: a blade cams out of the slot under load and cannot centre itself, so production lines that drive screws automatically specify the cross recessed equivalents (DIN 965 / ISO 7046 for countersunk, DIN 7985 / ISO 7045 for pan head) instead.

What is the MOQ and lead time for these screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these screws state?

State the standard designation (for example DIN 914, DIN 915, DIN 7981/7982/7983 — or the ISO designation your drawing prints), thread or tapping size, length or head dimension, strength class or material (such as 45H, 4.8, A2-70, A4-80 or brass), finish (black oxide, zinc plated, or plain), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 963 Slotted Countersunk Machine Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your DIN 963 Slotted Countersunk Machine Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.