ANSI B18.3 Hex Socket Head Shoulder Screws

ANSI/ASME B18.3 hex socket head shoulder screws in inch sizes — threaded end #4 to 1-1/2 under an unthreaded precision shoulder from 1/8 to 2 in — with the collected 14-size table: shoulder diameter bands, head geometry, socket size and thread data.

Last updated: 2026-11

Request a Quote

ANSI B18.3 Hex Socket Head Shoulder Screws in an industrial setting
Illustrative image redrawn from real ANSI B18.3 Hex Socket Head Shoulder Screws product references — not a photograph of stocked items.

Specifications

A shoulder screw is two fasteners in one: a precision-ground unthreaded shoulder that acts as a bearing pin, bushing or pivot, and a threaded end that clamps the mating part down against it. That split is the whole point — the shoulder carries sliding or rotating loads with its close-tolerance diameter, while the thread underneath only has to hold the joint snug, so the moving part never rides on thread crests. The collected B18.3 table runs 14 sizes from a 1/8 in shoulder up to 2 in and tabulates the three-diameter system per size: the shoulder diameter d s with max/min limits (0.123/0.121 in at the 1/8 size — a few tenths of a thousandth under nominal, which is what makes it a running fit), the head diameter d k and height k, the hex socket nominal size s with its socket depth t, and then the thread-end data: thread size (#4 up to 1-1/2), nominal diameter, threads per inch, and the thread length b. Note the deliberate step-down: the threaded end is always 2–4 sizes smaller than the shoulder, so a 1/4 in shoulder screw carries a 10-24 thread — specify the shoulder as the working diameter and let the thread follow the standard, not the other way round. For the metric counterpart, ISO 7379 shoulder screws are covered separately on this site.

Standard ANSI/ASME B18.3 — hex socket head shoulder screws (inch series)
Series Shoulder diameters 1/8 – 2 in (14 sizes tabulated)
Tabulated geometry Per shoulder size: shoulder d s (max / min), head d k (max / min), head height k (max / min), socket nominal size s, socket depth t (min), thread size d, nominal diameter, threads per inch PP, thread length b
Shoulder at 1/8 d s 0.123 / 0.121 in; head d k 0.25 in max; head height k 0.125 in max; socket s 0.078 in; thread #4-40 UNC, b 0.157 in
Shoulder at 1/4 d s 0.248 / 0.246 in; head d k 0.375 in max; head height k 0.188 in max; socket s 0.125 in; thread 1/4-20 UNC, b 0.375 in
Shoulder at 1/2 d s 0.498 / 0.496 in; head d k 0.75 in max; head height k 0.312 in max; socket s 0.25 in; thread 3/8-16 UNC, b 0.625 in
Shoulder at 1 d s 0.998 / 0.996 in; head d k 1.312 in max; head height k 0.625 in max; socket s 0.5 in; thread 3/4-10 UNC, b 1 in
Materials / strength Not tabulated by the collected specification — per RFQ (alloy, hardness and finish per drawing callout)

Materials

  • Material, hardness and finish specified per RFQ — the collected specification table covers geometry only

Ordering & documentation

Documents

Shipments of ANSI B18.3 Hex Socket Head Shoulder Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ANSI B18.3 Hex Socket Head Shoulder Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ANSI B18.3 Hex Socket Head Shoulder Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for ansi b18.3 hex socket head shoulder screws is 10,000 pieces (applies to the standard sizes and finishes for ansi b18.3 hex socket head shoulder screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for ansi b18.3 hex socket head shoulder screws run 3–7 days. Quantities or variants of ansi b18.3 hex socket head shoulder screws outside the standard range are confirmed at quotation.

Storage & shipping

ANSI B18.3 Hex Socket Head Shoulder Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store ansi b18.3 hex socket head shoulder screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why is the threaded end smaller than the shoulder, and does that matter for design?

It matters more than any other single number on the page. The shoulder is the functional diameter — it locates the part, takes the pivot or sliding load, and its ground limits (read the 1/2 in row: 0.498/0.496 in) hold the clearance to a few tenths of a thousandth so the mating part does not rock. The thread only needs to pull the joint together, so the standard steps it down — a 1/2 in shoulder carries a 3/8-16 thread — leaving more shoulder length usable and keeping the thread from interfering with a close-fitting bore. The design trap is specifying by thread: a "3/8 shoulder screw" can mean several shoulder diameters across standards, whereas the shoulder diameter plus usable length pins the part exactly. Quote the shoulder, the shoulder length and the thread length separately, and check replacements against all three.

What is the MOQ and lead time for these screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for ANSI B18.3 Hex Socket Head Shoulder Screws?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ANSI B18.3 Hex Socket Head Shoulder Screws state?

State the full designation (ANSI/ASME B18.3), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ANSI B18.3 Hex Socket Head Shoulder Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ANSI B18.3 Hex Socket Head Shoulder Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.