ISO 1502 — ISO Metric Screw Threads: Gauges and Gauging
ISO 1502:1996 — the manufacture and use of gauges for checking ISO metric screw threads, covering both external and internal threads: the document that turns the ISO 965 tolerance classes into pass/fail inspection practice.
Last updated: 2026-11
Specifications
ISO 1502 is the inspection layer of the metric thread system. The collected index summarizes it as "Manufacture and use of gauges for checking ISO metric threads (external & internal)" — the document that specifies the gauges themselves and how they are applied. The chain it completes: ISO 724 prints the basic dimensions, ISO 965 defines the tolerance classes that give a thread its max/min limits, and ISO 1502 defines the GO/NO-GO gauge practice that decides on the shop floor whether a produced thread is inside those limits. Both directions of the thread are in scope — external (bolt) and internal (nut) — which is why a mating pair can be accepted against one coherent gauging scheme rather than two ad-hoc ones. For a buyer, the document's relevance shows up in any conversation about acceptance criteria: when a drawing calls 6H/6g, the class is only as enforceable as the gauging practice behind it, and ISO 1502 is that practice for metric threads. The tabulated edition is 1996; confirm currency with ISO before designing to a summary.
| Standard | ISO 1502:1996 — ISO general-purpose metric screw threads — Gauges & gauging |
|---|---|
| Scope (as tabulated) | Manufacture and use of gauges for checking ISO metric threads (external & internal) |
| Related documents | Basic dimensions ISO 724; tolerance classes ISO 965-1/-2 — ISO 1502 is the enforcement layer; three-wire measurement alternative: ISO 16239 measuring wires |
| Coverage | Gauging of both external and internal metric threads under one scheme |
| Gauge specifications | Not tabulated by the collected index — state thread size, class and acceptance method at RFQ |
Materials
- Not applicable — reference scope page; gauge practice is geometric, not material data
Ordering & documentation
Documents
Shipments of ISO 1502 — ISO Metric Screw Threads: Gauges and Gauging are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 1502 — ISO Metric Screw Threads: Gauges and Gauging orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ISO 1502 — ISO Metric Screw Threads: Gauges and Gauging), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for iso 1502 — iso metric screw threads: gauges and gauging is 10,000 pieces (applies to the standard sizes and finishes for iso 1502 — iso metric screw threads: gauges and gauging; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 1502 — iso metric screw threads: gauges and gauging run 3–7 days. Quantities or variants of iso 1502 — iso metric screw threads: gauges and gauging outside the standard range are confirmed at quotation.
Storage & shipping
ISO 1502 — ISO Metric Screw Threads: Gauges and Gauging are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 1502 — iso metric screw threads: gauges and gauging dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
How does ISO 1502 connect a tolerance class like 6g on a drawing to what the inspector actually measures?
A tolerance class is a set of limits; a gauge is the decision instrument that applies them at production speed. ISO 965 defines the limits behind "6g" for an external metric thread; ISO 1502 specifies the gauges — GO and NO-GO members checking the thread's maximum and minimum material condition — and the rules for using them, for both external and internal threads. A part that passes the GO gauge and rejects on the NO-GO gauge is inside the class; that pass/fail judgment, not a bench measurement of every parameter, is what the class means at the point of manufacture. The document is why the same 6g callout is inspected the same way at any supplier — the gauging scheme is standardized alongside the tolerances. For RFQs, the practical note is to name the acceptance method along with the class: gauging per ISO 1502 is the default reading for metric threads, while alternatives such as three-wire measurement of the pitch diameter (measuring wires per ISO 16239) are a different, instrument-based acceptance conversation.
What is the MOQ and lead time for threaded parts supplied with gauge acceptance per ISO 1502?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Confirm the exact schedule against quantity, size mix and any tooling items at quotation.
What is the MOQ and lead time for ISO 1502 — ISO Metric Screw Threads: Gauges and Gauging?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ISO 1502 — ISO Metric Screw Threads: Gauges and Gauging state?
State the full designation (ISO 1502:1996), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ISO 1502 — ISO Metric Screw Threads: Gauges and Gauging inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your ISO 1502 — ISO Metric Screw Threads: Gauges and Gauging
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support