DIN 7995 Cross Recessed Raised Countersunk Head Wood Screws

DIN 7995 cross recessed raised countersunk head wood screws, No. 2 to No. 8: shank and head geometry, Phillips/Pozi recess data and the commercial length ladder to 80 mm.

Last updated: 2026-11

Request a Quote

DIN 7995 Cross Recessed Raised Countersunk Head Wood Screws in an industrial setting
Illustrative image redrawn from real DIN 7995 Cross Recessed Raised Countersunk Head Wood Screws product references — not a photograph of stocked items.

Specifications

DIN 7995 is the raised countersunk (oval head) wood screw with cross recess — the head that sits flush at the rim but carries a shallow dome above the surface, standard where the finish wants a decorative or wear-tolerant crown (furniture, joinery, hardware plates). The collected 12/2016-edition table runs thread sizes 2 to 8 with shank ds max=nom/min, raised head diameter dk nom, head height k max, head fillet f ≈, and the recess data — cross recess number plus the m depth columns for both Phillips and Pozi drivers (m (Pozi) 2.8 at size 2.5 up to 6.6 at size 8) — with the commercial length ladder 10 to 80 mm and its mass table in the third grid. The source page carries the superseded 12/2010 edition as a separate table alongside; both are transcribed. The raised head needs the matching raised csk bit: a flat 90° seat leaves the dome proud by more than the printed k.

Standard / scope DIN 7995 cross recessed raised countersunk head wood screws — sizes 2 to 8, edition 12/2016 (supersedes 12/2010; the superseded edition is transcribed as a separate table)
Shank / head ds max=nom and ds min per size; raised csk head dk nom; head height k max; head fillet f ≈
Cross recess Recess number per size; m depths printed for both Phillips and Pozi (Pozi 2.8 at size 2.5 → 6.6 at size 8)
Commercial lengths l Ladder 10 to 80 mm; approximate mass per 1000 pcs (ρ=7,85 kg/dm³) tabulated per size/length
Not tabulated Point type (gimlet/brad), material, finish — per RFQ
DIN 7995 cross recessed raised countersunk head wood screws — 12/2016 edition, head geometry by thread sizeDimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
thread size22.53.03.54.04.55.05.56.078
ds max=nom22.533.544.555.5678
ds min1.62.12.63.023.524.024.525.025.526.427.42
dk nom3.84.75.66.57.58.39.210.21112.514
k max1.21.51.651.932.22.352.52.7533.54
recess nr.01122223334
m (Phillips)-2.73.14.24.555.37.17.48.39
m (Pozi)-2.83.14.34.65.15.36.6788.8
  • Source spanning title row carried verbatim: "Dimensions in mm - source DIN 7995 Publication date: 12/2016 Supersedes DIN 7995: 12/2010".
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (11/12) — grid padded empty; per-row pre-pad widths: 11,12,12,12,12,12,12,12,12.
DIN 7995 — superseded 12/2010 edition, head geometry by thread sizeDimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
thread size22.53.03.54.04.55.05.56.078
ds max=nom22.533.544.555.5678
ds min1.62.12.63.023.524.024.525.025.526.427.42
dk nom3.84.75.66.57.58.39.210.21112.514.5
k max1.21.51.651.932.22.352.52.7533.54
f ≈0.50.60.750.911.11.251.41.51.752
recess nr.01122223334
m (Phillips)-2.73.14.24.555.37.17.48.39
m (Pozi)-2.83.14.34.65.15.36.6788.8
  • Source spanning title row carried verbatim: "Dimensions in mm - source DIN 7995 Publication date: 12/2010 Supersedes DIN 7995: 12/1984".
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (11/12) — grid padded empty; per-row pre-pad widths: 11,12,12,12,12,12,12,12,12,12.
DIN 7995 — approximate mass, kg per 1000 pcs (ρ=7,85 kg/dm³), commercial lengthsDimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
d thread size22.533.544.555.5678
nominal length l
100.390.650.85
120.450.740.981.27
160.570.921.221.581.892.29
200.691.11.51.892.272.77
251.351.792.272.763.37
301.592.112.663.264
351.822.443.053.754.566.76
402.062.743.454.225.167.6
453.063.784.735.758.45
504.175.226.359.29
606.27.5711
708.7712.7
801014.5
  • Source spanning title row carried verbatim: "Din 7995 - 1986 ≈ weigth in kg x1000 pcs, (ρ=7,85 kg/dm 3 ) - commercial items".
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (12/1/5/6/8/10) — grid padded empty; per-row pre-pad widths: 12,12,1,5,6,8,8,8,8,10,10,10,10,10,10,10.

Materials

  • Wood screws order in bright steel, zinc-plated, brass (decorative furniture work) or A2/A4 stainless for exterior joinery; point form and thread cut matter to the timber — state softwood/hardwood or the board material (chipboard, ply) so the point and core hardness match. The Phillips/Pozi m columns are the driver-selection data: confirm which recess your line is tooled for before ordering volume

Ordering & documentation

Documents

Shipments of DIN 7995 Cross Recessed Raised Countersunk Head Wood Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 7995 Cross Recessed Raised Countersunk Head Wood Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 7995 Cross Recessed Raised Countersunk Head Wood Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 7995 cross recessed raised countersunk head wood screws is 10,000 pieces (applies to the standard sizes and finishes for din 7995 cross recessed raised countersunk head wood screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 7995 cross recessed raised countersunk head wood screws run 3–7 days. Quantities or variants of din 7995 cross recessed raised countersunk head wood screws outside the standard range are confirmed at quotation.

Storage & shipping

DIN 7995 Cross Recessed Raised Countersunk Head Wood Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 7995 cross recessed raised countersunk head wood screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Raised countersunk or flat countersunk — when does the dome matter?

Three practical reasons to pick the raised head of DIN 7995 over the flat DIN 7997 (both registered here): appearance, where the dome reads as finished furniture hardware rather than construction; wear, where a flush screw in a walkable or handled surface collects dirt in the slot and the dome sheds it; and tolerance to seat imperfection — the dome rides a slightly shallow or rough csk better than a flat head, which shows every gap as a halo. The trade is the special bit: the seat is raised-csk geometry, and driving a flat-csk bit to a raised screw cracks the rim. Match the drill/countersink tool to the standard, and the two become interchangeable in production.

Why are there two edition tables for the same screw?

Because the source page prints the current 12/2016 edition and the superseded 12/2010 edition as separate tables, and the collected corpus transcribed both — that is deliberate: legacy drawings still specify the older edition, and the tables differ in small details (head fillet and recess depth rows), so the page keeps both token-for-token with the edition rows carried verbatim. For ordering, the current edition governs unless your drawing names the old one; for auditing a legacy BOM, read the superseded table. Nothing was merged or normalized between them — if a value moved between editions, the two tables show it.

What is the MOQ and lead time for DIN 7995 Cross Recessed Raised Countersunk Head Wood Screws?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 7995 Cross Recessed Raised Countersunk Head Wood Screws state?

State the full designation (DIN 7995 Cross Recessed Raised Countersunk Head Wood Screws), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 7995 Cross Recessed Raised Countersunk Head Wood Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your DIN 7995 Cross Recessed Raised Countersunk Head Wood Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.