Ultra-Drive Countersunk Security Machine Screws (UL02)

Countersunk head security machine screws in the Ultra-Drive 2-way reusable pin-in-hexalobular drive, thread sizes M2–M10 in stainless steel (A2/A4), sitting flush in a 90° countersink — the flush-finish reusable security screw for panels where a proud head would foul or catch.

Last updated: 2026-11

Request a Quote

Ultra-Drive Countersunk Security Machine Screws (UL02) in an industrial setting
Illustrative image redrawn from real Ultra-Drive Countersunk Security Machine Screws (UL02) product references — not a photograph of stocked items.

Specifications

UL02 is the flush-finish member of the Ultra-Drive line: the same 2-way reusable pin-in-hexalobular security recess as UL01, carried on a 90° countersunk head that sits level with the surface once driven. That matters wherever a proud button head would foul a sliding cover, catch clothing, or read as an invitation on a public-facing panel — sliding lids, hinged access doors, mounting plates under handling traffic. The thread range is M2–M10, the smaller end of the line: this SKU targets instrument and enclosure work rather than heavy guarding. The manufacturer lists stainless steel with A2 and A4 options and tabulates the countersunk head dimensions per size on the line page. Countersunk security screws need one more RFQ field than their button-head siblings — the countersink angle and the mating hole preparation must agree, or the head sits either proud or below the surface; 90° is the metric convention and the form this SKU is drawn to. As with the whole line, the matched driver is part of the order: the recess is the security.

Line / SKU Ultra-Drive UL02 — countersunk head security machine screw, 2-way reusable
Drive Pin-in-hexalobular security recess (2-way: same driver installs and removes; standard Torx/hex drivers blocked by the centre pin)
Thread range M2 – M10 metric machine thread; lengths to order
Head form Countersunk head, 90° included angle; head diameter and height tabulated per size by the manufacturer
Materials Stainless steel — A2/A4 options
Reusability Reusable — designed for repeated install/remove cycles by authorised holders of the drive bit

Materials

  • A2 stainless steel
  • A4 stainless steel

Ordering & documentation

Documents

Shipments of Ultra-Drive Countersunk Security Machine Screws (UL02) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Ultra-Drive Countersunk Security Machine Screws (UL02) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Ultra-Drive Countersunk Security Machine Screws (UL02)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for ultra-drive countersunk security machine screws (ul02) is 10,000 pieces (applies to the standard sizes and finishes for ultra-drive countersunk security machine screws (ul02); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for ultra-drive countersunk security machine screws (ul02) run 3–7 days. Quantities or variants of ultra-drive countersunk security machine screws (ul02) outside the standard range are confirmed at quotation.

Storage & shipping

Ultra-Drive Countersunk Security Machine Screws (UL02) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store ultra-drive countersunk security machine screws (ul02) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When is a countersunk security screw the wrong choice?

When the mating part has no countersink. A countersunk head needs a prepared 90° seat — driving one into a plain hole leaves the head proud or splits thin sheet, and the flush look that motivated the choice never appears. If the panel is drilled plain, the button head UL01 is the matching SKU; if the seat exists, UL02 gives the same 2-way reusable security with nothing standing proud of the surface.

What should an RFQ for UL02 screws state?

Thread size and length (M2–M10), material class A2 or A4, confirmation that the mating countersink is 90°, quantity per size, and drive bits with the order — the pin-in-hexalobular recess only works with its matched driver. Per-size head dimensions are confirmed with the quotation.

What is the MOQ and lead time for Ultra-Drive security screws?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Confirm the exact schedule against quantity and size mix at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Ultra-Drive Countersunk Security Machine Screws (UL02) inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your Ultra-Drive Countersunk Security Machine Screws (UL02)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.