Torx (Hexalobular) Head Fastener Basic Dimensions

Torx socket basic dimensions by socket number 6 through 100: dimension A (socket across-corners) and dimension B, plus the fallaway allowance f ladder — the drive-system geometry shared by screws, nuts and tools.

Last updated: 2026-11

Request a Quote

Torx (Hexalobular) Head Fastener Basic Dimensions in an industrial setting
Illustrative image redrawn from real Torx (Hexalobular) Head Fastener Basic Dimensions product references — not a photograph of stocked items.

Specifications

The Torx drive is standardized by socket number, and the collected chart gives the two controlling dimensions per number from 6 to 100: A, the across-corners size of the hexalobular socket, and B the related basic dimension — 6: A 1,75 / B 1,27; 20: 3,95/2,85; 45: 7,93/5,64; 100: 22,4/16. The second table is the fallaway allowance f by socket number (0,31 at T6 to 2,03 at T100) — the clearance built into the system that lets the driver seat fully before camming out; it is the reason a Torx joint tolerates driver misalignment better than a hex socket. Values print with decimal commas (1,75; 22,4) — the source's notation, carried verbatim. Two tables, same numbers in different layouts (list and transposed), so a gauge can be checked either way. This is drive-system geometry: it applies wherever the socket number appears — machine screws, self-tapping screws, nuts — and pairs with the drive-bit standards rather than any single screw standard.

Scope Torx (hexalobular) drive socket basic dimensions, socket numbers 6-100 — dimension A, dimension B, and fallaway allowance f; decimal commas as printed
Dimension A / B T6: 1,75 / 1,27; T8: 2,4 / 1,75; T10: 2,8 / 2,05; T15: 3,35 / 2,4; T20: 3,95 / 2,85; T25: 4,5 / 3,25; T30: 5,6 / 4,05; T40: 6,75 / 4,85
Upper ladder T45: 7,93 / 5,64; T50: 8,95 / 6,45; T55: 11,35 / 8,05; T60: 13,45 / 9,6; T70: 15,7 / 11,2; T80: 17,75 / 12,8; T90: 20,2 / 14,4; T100: 22,4 / 16
Fallaway allowance f T6: 0,31; T8: 0,41; T10: 0,51; T15/T20: 0,51/0,64; T25/T30: 0,64/0,76; T40: 0,89; T50: 1,27; T70: 1,52; T90: 1,78; T100: 2,03 — driver-seating clearance
Not tabulated External (bolt-head) Torx dimensions, socket depth/gauging details, torque ratings per size — per RFQ
Torx (hexalobular) head fastener basic dimensions — socket number vs dimension A and BDecimal commas (1,75 / 22,4 / 16) are the source's own notation, carried verbatim not normalized. Verification: live re-fetch verify 2026-11-02 (batch x141 sample, 85 cells strict-equal).
Torx (Hexalobular) Socket NumberDimension ADimension B
61,751,27
82,41,75
102,82,05
153,352,4
203,952,85
254,53,25
305,64,05
406,754,85
457,935,64
508,956,45
5511,358,05
6013,459,6
7015,711,2
8017,7512,8
9020,214,4
10022,416
Torx (hexalobular) head fastener basic dimensions — fallaway allowance f by socket numberDecimal commas carried verbatim; transposed layout (socket numbers as columns) as printed.
Socket No.6810152025304045505560708090100
Fallaway allowance f0,310,410,510,510,640,640,760,891,021,271,271,271,521,521,782,03

Materials

  • Drive geometry is material-independent, but drive size is a torque decision: the socket number must carry the installation torque with the drive bit, and the fallaway allowance only works when the bit is in spec. Pair the socket number with a torque-controlled driver, and specify drive type on drawings by socket number (T20, T30) — not by measured across-flats, which no two fastener standards label identically

Ordering & documentation

Documents

Shipments of Torx (Hexalobular) Head Fastener Basic Dimensions are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Torx (Hexalobular) Head Fastener Basic Dimensions orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Torx (Hexalobular) Head Fastener Basic Dimensions), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for torx (hexalobular) head fastener basic dimensions is 10,000 pieces (applies to the standard sizes and finishes for torx (hexalobular) head fastener basic dimensions; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for torx (hexalobular) head fastener basic dimensions run 3–7 days. Quantities or variants of torx (hexalobular) head fastener basic dimensions outside the standard range are confirmed at quotation.

Storage & shipping

Torx (Hexalobular) Head Fastener Basic Dimensions are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store torx (hexalobular) head fastener basic dimensions dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

What is the "fallaway allowance" and why does it have its own table?

It is the engineered clearance between a fully seated driver and the socket — the amount the lobes can fall away from full flank contact before the drive loses grip. Torx cam-out resistance comes from drive geometry being nearly radial; the fallaway allowance f defines how much of that geometry is consumable clearance, and it scales with socket size (0,31 at T6 to 2,03 at T100, decimal commas as printed). The reason it gets its own table is gauging: wear or off-spec bits eat into the allowance first, so a gauge check against f catches a worn driver before it starts rounding sockets. Practically: it is not a dimension you machine to — it is the tolerance budget the drive system lives inside. If a Torx joint is showing socket wear at assembly torque, the fallaway column is where to look before blaming the screw.

The chart prints decimal commas (1,75; 22,4) — which units and which dimension is which?

Millimeters, with the source's decimal-comma notation carried verbatim — 1,75 is 1.75 mm. Dimension A is the across-corners basic size of the hexalobular socket (the dimension a socket gauge works to), and B is the companion basic dimension of the drive form; both scale with socket number on a fixed ladder, which is why checking any two points identifies the number: A 7,93 puts you at T45, not T40 (6,75) or T50 (8,95). The two tables are the same data in list and transposed layouts — the transposed one exists for gauge rows. One caution from the source's notation: a comma read as a decimal point in an English-locale tool silently multiplies by a hundred (1,75 → 175), so keep the conversion explicit when moving these values into CAD or inspection sheets.

What is the MOQ and lead time for Torx (Hexalobular) Head Fastener Basic Dimensions?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for Torx (Hexalobular) Head Fastener Basic Dimensions state?

State the full designation (Torx (Hexalobular) Head Fastener Basic Dimensions), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Torx (Hexalobular) Head Fastener Basic Dimensions inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your Torx (Hexalobular) Head Fastener Basic Dimensions
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.