ISO 1478 Self-Tapping Screw Threads (ST) — Thread and Point Dimensions, ST 1.5 – ST 9.5 (mm)

ISO 1478 self-tapping screw thread (ST) dimensions — pitch, major/pitch/minor diameter max/min, crest rounding, point radius and incomplete-thread lengths for tapping types C, F and R per size from ST 1.5 to ST 9.5, transcribed row-for-row from the collected chart.

Last updated: 2026-11

Request a Quote

ISO 1478 Self-Tapping Screw Threads (ST) — Thread and Point Dimensions, ST 1.5 – ST 9.5 (mm) in an industrial setting
Illustrative image redrawn from real ISO 1478 Self-Tapping Screw Threads (ST) — Thread and Point Dimensions, ST 1.5 – ST 9.5 (mm) product references — not a photograph of stocked items.

Specifications

Self-tapping screws cut or form their own mating thread, and ISO 1478 defines the thread they carry: the ST series, sized ST 1.5 through ST 9.5. The collected chart's columns describe a thread optimized to cut rather than to run against a nut: d1 major max/min (ST 4.2: 4.22/4.04 mm), d2 pitch, d3 minor, and c crest rounding — a hardened thread whose sharp flanks and lobed cross-section do the tapping. The point columns are the practical heart of the chart: r the point radius (reference — the source notes the end may not be perfectly spherical but shall not be sharp), and y the length of incomplete thread at the point for the three tapping styles — type C (the cutting chip-clearence point), F (cutting with a machine-screw point) and R (forming/rolling, which displaces rather than removes material) — reading ST 4.2: y runs 3.7 mm (C), 2.8 (F), 3.2 (R). That length is engagement-critical: the incomplete thread is what does the tapping, so the screw must pass fully through the material being tapped before complete thread engages the host — hole depth and screw length are chosen around y. The former No. column (source Note 3) bridges old drawings ("No. 8 self-tapper" = ST 4.8). Host material, hole preparation and drive style are not tabulated — per RFQ; the source chart is presented transposed here, one row per size, with its "-" cells flagged on the table.

Standard ISO 1478 — self-tapping screw threads (ST series), thread and point dimensions; the ST thread is the common geometry across tapping types C (cutting), F (cutting, machine-screw point) and R (forming)
Size range ST 1.5 – ST 9.5, 14 sizes; pitches 0.5 – 2.1 mm; dimensions in millimetres; former thread No. carried per size (information, source Note 3)
Tabulated thread (mm) Per size: P ≈, d1 major max/min, d2 pitch max/min, d3 minor max/min, c crest rounding max; example ST 4.2: 1.4, 4.22/4.04, 3.10/2.95, 2.84/2.69, 0.1
Point columns (mm, ref) r point radius ≈ (may not be perfectly spherical but shall not be sharp — source Note 1); y incomplete-thread length per tapping type: C 3.7, F 2.8, R 3.2 at ST 4.2 (source Note 2)
Host material / holes Substrate, drilled-hole or pilot sizing and drive style not tabulated by the collected chart — per RFQ
ISO 1478 self-tapping screw threads (ST) — thread and point dimensions (ST 1.5 – ST 9.5, mm)All dimensions in millimetres. P ≈ approximate pitch; d1 = major diameter (max/min); d2 = pitch diameter (max/min); d3 = minor diameter (max/min); c = crest rounding (max); r = chamfer/point radius (≈, reference — the end may not be perfectly spherical but shall not be sharp, source Note 1); y = length of incomplete thread (reference) for tapping types C, F and R (source Note 2); the former thread-designation number is carried for information only (source Note 3).
Thread SizeP ≈d1 — Major (max)d1 (min)d2 — Pitch (max)d2 (min)d3 — Minor (max)d3 (min)c (max)r ≈ (ref)y — Type C (ref)y — Type F (ref)y — Type R (ref)Former No. (info)
ST 1.50.51.521.380.910.840.790.690.1-1.41.1-0
ST 1.90.61.901.761.241.171.121.020.1-1.61.2-1
ST 2.20.82.242.101.631.521.471.370.1-21.6-2
ST 2.60.92.572.431.901.801.731.600.1-2.31.8-3
ST 2.91.12.902.762.182.082.011.880.1-2.62.1-4
ST 3.31.33.303.122.392.292.212.080.1-32.5-5
ST 3.51.33.533.352.642.512.412.260.10.53.22.52.76
ST 3.91.33.913.732.922.772.672.510.10.63.52.737
ST 4.21.44.224.043.102.952.842.690.10.63.72.83.28
ST 4.81.64.804.623.583.433.303.120.150.74.33.23.610
ST 5.51.85.465.284.173.993.863.680.150.853.64.312
ST 6.31.86.256.034.884.704.554.340.150.963.6514
ST 82.18.007.786.205.995.845.640.151.17.54.26.316
ST 9.52.19.659.437.857.597.447.240.151.484.2-20
  • Row 1 (ST 1.5): The source prints "-" for the r reference radius at ST 1.5 – ST 2.6 and for Type R incomplete-thread length below ST 3.5 and at ST 9.5 — those values are not offered by the collected chart, not zeros.
  • The source prints this table transposed (sizes as columns); it is presented here one row per size.

Materials

  • Tapping type and host material go together — C/F cut (chips), R forms (no chips, needs ductility); specify host, type and finish together at RFQ

Ordering & documentation

Documents

Shipments of ISO 1478 Self-Tapping Screw Threads (ST) — Thread and Point Dimensions, ST 1.5 – ST 9.5 (mm) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 1478 Self-Tapping Screw Threads (ST) — Thread and Point Dimensions, ST 1.5 – ST 9.5 (mm) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 1478 Self-Tapping Screw Threads (ST) — Thread and Point Dimensions, ST 1.5 – ST 9.5 (mm)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for iso 1478 self-tapping screw threads (st) — thread and point dimensions, st 1.5 – st 9.5 (mm) is 10,000 pieces (applies to the standard sizes and finishes for iso 1478 self-tapping screw threads (st) — thread and point dimensions, st 1.5 – st 9.5 (mm); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 1478 self-tapping screw threads (st) — thread and point dimensions, st 1.5 – st 9.5 (mm) run 3–7 days. Quantities or variants of iso 1478 self-tapping screw threads (st) — thread and point dimensions, st 1.5 – st 9.5 (mm) outside the standard range are confirmed at quotation.

Storage & shipping

ISO 1478 Self-Tapping Screw Threads (ST) — Thread and Point Dimensions, ST 1.5 – ST 9.5 (mm) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 1478 self-tapping screw threads (st) — thread and point dimensions, st 1.5 – st 9.5 (mm) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Type C, F or R self-tapper — what does the choice change, and why does the incomplete-thread length (y) drive hole design?

The tapping type decides how the joint is made and what the host must tolerate. Type C is the classic thread-cutting point: it cuts a chip-clearence thread as it enters, works across a broad range of metals and plastics, and leaves chips — fine in through-holes, a factor in blind holes where chips pack. Type F cuts with a machine-screw point: it suits thicker sections and rework (a stripped thread can often be re-entered with a larger F), with the same chip behavior. Type R thread-forms: it displaces the host material into a flowed thread, no chips, stronger in ductile hosts (the flowed thread work-hardens the host around the screw) — but it needs sufficient ductility, so brittle materials and some cast alloys are C/F territory. The chart's y column is why hole design follows the screw: the incomplete thread at the point (3.7 mm at ST 4.2 type C) is the working part that cuts or forms — the screw must traverse the full material thickness within y plus the thread pitch before its complete thread engages, so blind-hole depth, screw length and grip are calculated from y, not guessed. Practical specification: name host material, thickness and tapping type together — ST sizes are interchangeable across types only in thread geometry, not in what they do to the hole — and confirm hole preparation at RFQ; the chart's "-" cells (r below ST 2.6, y-R below ST 3.5) mean the source offers no reference value there, not that the dimension is zero.

What is the MOQ and lead time for threaded parts on this standard?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common thread sizes on this standard are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for ISO 1478 Self-Tapping Screw Threads (ST) — Thread and Point Dimensions, ST 1.5 – ST 9.5 (mm)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 1478 Self-Tapping Screw Threads (ST) — Thread and Point Dimensions, ST 1.5 – ST 9.5 (mm) state?

State the full designation (ISO 1478), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 1478 Self-Tapping Screw Threads (ST) — Thread and Point Dimensions, ST 1.5 – ST 9.5 (mm) inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ISO 1478 Self-Tapping Screw Threads (ST) — Thread and Point Dimensions, ST 1.5 – ST 9.5 (mm)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.