ISO 14582 Hexalobular Countersunk High Head Screws

ISO 14582 hexalobular socket countersunk flat head screws, high head — M3 to M10, the flush countersunk head with a tall cone that fits a deep six-lobe drive, with the collected geometry rows.

Last updated: 2026-11

Request a Quote

ISO 14582 Hexalobular Countersunk High Head Screws in an industrial setting
Illustrative image redrawn from real ISO 14582 Hexalobular Countersunk High Head Screws product references — not a photograph of stocked items.

Specifications

ISO 14582 is the countersunk member of the hexalobular machine-screw family: a 90°-cone flat head that seats flush, but with the "high head" geometry — a taller cone than a standard countersunk head — so the socket is deep enough for a hexalobular drive to transmit serious torque without stripping. The collected table covers M3 to M10 per size with the thread length b, head diameter dk max, shank ds max, head height k max, drive size (TORX 10 at M3 to 50 at M10), drive A reference and t max. That height is the whole point: a standard flush countersunk head leaves no depth for a six-lobe socket, which is why slotted or cross-recessed drives dominate the ordinary countersunk pages (ISO 2009 / 2010 in this catalog) and why this series exists for drive-critical flush assemblies. One verbatim source defect is flagged and NOT normalized: the M5 t max prints 169 where the M3/M5 progression implies a 1,xx scale — if the M5 socket depth is measurement-critical, quote it per RFQ rather than reading the cell. Drive size, A and dk ladder are clean. Property class and finish are not tabulated by the collected specification — per RFQ.

Standard ISO 14582 — hexalobular socket countersunk flat head screws, high head
Size range Threads M3 – M10
Head diameter dk max: 6,57 (M3) → 21,3 (M10) mm
Head height k max: 2,2 (M3) → 6,5 (M10) mm — the "high head" cone
Drive Hexalobular, source TORX size 10 / 20 / 25 / 30 / 45 / 50, A ref. 2,8 → 8,95 mm
Socket depth t max per size; M5 cell flagged verbatim (source print 169) — per RFQ if critical
Property class / finish Not tabulated by the collected specification — per RFQ
ISO 14582 hexalobular countersunk flat head screws, high head - geometry, threads M3 - M10All dimensions in millimetres. Source rows carried verbatim: b, dk max, ds max, k max, TORX size, A (reference) and t max. The t max value 169 at M5 is the source's own print.
thread dbdk maxds maxk maxTORXAt max
M3186,5732,2102,81,18
M4209,0243,01203,95169
M52210,953,5254,51,89
M62413,264,22305,62,22
M82817,985,69457,932,99
M103221,3106,5508,953,3
  • Row 2 (M4): M4 t max prints 169 against the M3/M5 progression implies a 1,xx scale, likely a lost decimal comma). Carried verbatim, NOT normalized — quote t per RFQ until the value is corroborated.

Materials

  • Property class and finish specified per RFQ — flush six-lobe assemblies are commonly 8.8+ steel or stainless; state the seat angle (90°) and exposure at quotation

Ordering & documentation

Documents

Shipments of ISO 14582 Hexalobular Countersunk High Head Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 14582 Hexalobular Countersunk High Head Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 14582 Hexalobular Countersunk High Head Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for iso 14582 hexalobular countersunk high head screws is 10,000 pieces (applies to the standard sizes and finishes for iso 14582 hexalobular countersunk high head screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 14582 hexalobular countersunk high head screws run 3–7 days. Quantities or variants of iso 14582 hexalobular countersunk high head screws outside the standard range are confirmed at quotation.

Storage & shipping

ISO 14582 Hexalobular Countersunk High Head Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 14582 hexalobular countersunk high head screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

What does "high head" change about a countersunk screw?

It buys the drive. A standard countersunk head is only as tall as its 90° cone needs to be, which leaves a shallow socket — fine for a slot, useless for a hexalobular under torque. ISO 14582 raises the cone (k max 3,5 mm at M5 against roughly 2,5-class on the slotted ISO 2009 ladder), deepening the socket so the six-lobe bit can transmit and back out repeatedly without cam-out or reaming. The collected geometry makes the cost visible: a taller cone sits slightly above flush before final seating, and the mating counterbore needs the matching height. Compare the drive sizes across this catalog — TORX 25 here at M5 against a 2,5 mm slot on the slotted page — and the torque story tells itself. The M5 t max cell in the collected source is flagged (169 print, not normalized), so confirm that one socket depth per RFQ; class and finish stay per RFQ throughout.

What is the MOQ and lead time for ISO 14582 Hexalobular Countersunk High Head Screws?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 14582 Hexalobular Countersunk High Head Screws state?

State the full designation (ISO 14582), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 14582 Hexalobular Countersunk High Head Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ISO 14582 Hexalobular Countersunk High Head Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.