TX10 5-Lobe Pin TX Button Self Tapping Security Screws

Button head 5-lobe pin TX self-tapping security screws, No.6–No.12 as tabulated (3.5–5.5 mm nominal): head diameters 5.7–10.5 mm, head heights 2.1–3.3 mm. Material-coded imperial availability matrix from 1/2″ to 3″; A2 and A4-70 stainless steel, zinc-plated steel on request.

Last updated: 2026-11

Request a Quote

TX10 5-Lobe Pin TX Button Self Tapping Security Screws in an industrial setting
Illustrative image redrawn from real TX10 5-Lobe Pin TX Button Self Tapping Security Screws product references — not a photograph of stocked items.

Specifications

TX10 carries the 5-lobe pin drive onto sheet metal and plastics: a self-tapping thread that cuts its own path under a button head, so a panel or housing gets the higher-security lobed fixing without a nut or a tapped hole. The collected tabulation runs gauges No.6 to No.12 (nominal 3.5 to 5.5 mm) with head diameters 5.7–10.5 mm and head heights 2.1–3.3 mm, with gauge-specific driver tools (F10-B to F27-B in the collected tool row). Supply is stated in A2 and A4-70 stainless steel with zinc-plated steel on request. One collected discrepancy is recorded rather than resolved: the page title and the dimension table identify a button head, while one prose sentence on the same page describes a countersunk head — the tabulated button-head line governs this page, and countersunk buyers should cross-check at quotation. The availability matrix is imperial, marked cell by cell and material-coded: No.6 marks at 1/2″, 3/4″, 1″ and 1 1/2″; No.8 and No.10 mark across 1/2″–2″; No.12 marks from 1″ upward, with the 2″–3″ tail in A4-70 only. The 5/8″ row carries no markers at all. Unmarked pairs are quotation lines, and the drive remains a reusable two-way fixing — a rare combination on a self-tapper, where most security drives are one-way.

Designation TX10 — button head self-tapping security screw, 5-lobe pin TX drive; thread-cutting into sheet metal and plastic, matched insert bit. Collected page prose once says countersunk while title and table say button — tabulated button head governs
Gauge range (tabulated) No.6, No.8, No.10, No.12 (nominal 3.5–5.5 mm)
Head diameter dk per gauge (mm) No.6 5.7 · No.8 7.4 · No.10 9.3 · No.12 10.5
Head height k per gauge (mm) No.6 2.5 · No.8 2.1 · No.10 2.6 · No.12 3.3
Tool size (collected) F10-B (No.6) · F15-B (No.8) · F25-B (No.10) · F27-B (No.12)
Length availability (as marked) No.6 1/2″–1 1/2″ (skips 5/8″, 1 1/4″) · No.8/No.10 1/2″–2″ (skips 5/8″) · No.12 1″–3″, 2″–3″ A4-70 marker only; unmarked pairs confirmed at quotation — Availability matrix legend (as collected): stainless-triangle marker = A2 stainless steel; black-triangle marker = A4-70 stainless steel
Security principle Reusable two-way fixing on a self-tapping thread; higher security than 6-lobe pin TX; higher-torque capable per the collected page

Materials

  • A2 stainless steel
  • A4-70 stainless steel
  • Steel, zinc plated (on request)

Ordering & documentation

Documents

Shipments of TX10 5-Lobe Pin TX Button Self Tapping Security Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for TX10 5-Lobe Pin TX Button Self Tapping Security Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (TX10 5-Lobe Pin TX Button Self Tapping Security Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for tx10 5-lobe pin tx button self tapping security screws is 10,000 pieces (applies to the standard sizes and finishes for tx10 5-lobe pin tx button self tapping security screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for tx10 5-lobe pin tx button self tapping security screws run 3–7 days. Quantities or variants of tx10 5-lobe pin tx button self tapping security screws outside the standard range are confirmed at quotation.

Storage & shipping

TX10 5-Lobe Pin TX Button Self Tapping Security Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store tx10 5-lobe pin tx button self tapping security screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Is a reusable security self-tapper really possible?

Yes — that is the point of the pin drives. One-way heads like clutch refuse to back out at all, which protects the fixing but ends its service life the first time maintenance opens it. TX10 keeps the 5-lobe pin drive: the matched insert bit drives it in and out indefinitely, while everyone without the restricted bit sees an immovable screw. That makes it the standard choice for removable panels on enclosures and plant equipment where the panel is sheet metal and there is no thread to receive a machine screw.

Button or countersunk — what does the source conflict actually mean for ordering?

The catalogue title, the slug and the dimension table for TX10 all describe a button head; a single prose sentence describes countersunk. Physical dimensions are what arrive, so this page follows the table: expect a domed button head with a 2.1–3.3 mm height, and do not design a flush countersink around it. If your detail genuinely needs flush, the countersunk self-tapping TX11 on the same drive is the designated page — state the head explicitly on the RFQ either way.

What is the MOQ and lead time for these security screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; unmarked matrix pairs, zinc-plated steel on request, and specials made to order are quoted with a confirmed schedule. Confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these security screws state?

State the designation code and head style, the drive (5-lobe pin TX or 7-lobe pin — matched restricted insert bits required), thread or tapping size and length, the material marker you expect (A2 or A4-70 stainless; zinc-plated steel on request), the substrate or mating part, required certificates, and quantity per size — plus destination country. If you are matching existing fixings, name the drive generation explicitly: 5-lobe, 6-lobe and 7-lobe pin bits are not interchangeable.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your TX10 5-Lobe Pin TX Button Self Tapping Security Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your TX10 5-Lobe Pin TX Button Self Tapping Security Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.