DIN 464 Knurled Thumb Screws

DIN 464 thumb screws with slotted knurled cylindrical head, M1 to M10 — fingertip adjustment with a slot for a driver — with the full collected 12-size table: knurled head geometry, slot limits, thread lengths and knurl pitch.

Last updated: 2026-11

Request a Quote

DIN 464 Knurled Thumb Screws in an industrial setting
Illustrative image redrawn from real DIN 464 Knurled Thumb Screws product references — not a photograph of stocked items.

Specifications

DIN 464 is the knurled thumb screw: a cylindrical head whose outside diameter is rolled with a straight knurl so the screw can be driven by fingertips alone, while the slot on top still accepts a blade for final tightening or for powered assembly. The knurl converts finger pressure into torque without any tool, which is what makes this the standard head for panels, access covers, jigs and instruments that are opened and closed in service. The collected table runs M1 to M10 and tabulates the full head system per size: the knurled head diameter d k with its nominal and limit band, the head height h, the cylindrical shank-relevant d s limits, the slot width n and depth t, the thread length b, and the knurl pitch itself — 0.5 mm on the small sizes stepping to 0.8 mm at M10 — because the knurl pitch is a specified feature, not a rolling accident. Where more head height is wanted for a better finger grip, the low-type counterpart is DIN 653 on this site. Materials, property classes and finishes are not printed by the collected specification and follow the drawing callout.

Standard DIN 464 — knurled thumb screws (slotted cylindrical head, straight knurl)
Series M1 – M10 (12 sizes tabulated)
Tabulated geometry Per size: pitch P, thread length b (min / max), chamfer c, knurled head diameter d k (Nominal / max / min), shank d s (max / min), head height h (Nominal / max / min), slot width n (Nominal / min / max), slot depth t (min / max), runout x max, knurl pitch
Dimensions at M3 Head d k nominal 12 (max 12.35 / min 11.65); shank d s max 6; head height h nominal 7.5; slot n nominal 0.8; slot depth t 1.8–2.2; thread b 9–10; knurl pitch 0.6
Dimensions at M6 Head d k nominal 24 (max 24.42 / min 23.58); shank d s max 12; head height h nominal 15; slot n nominal 1.6; slot depth t 3.5–4.3; thread b 18–20; knurl pitch 0.6
Head / drive form Knurled cylindrical head for fingertip driving, plus slotted drive for tool torque
Materials / strength Not tabulated by the collected specification — per RFQ (property class and finish per drawing callout)

Materials

  • Material, property class and finish specified per RFQ — the collected specification table covers geometry only

Ordering & documentation

Documents

Shipments of DIN 464 Knurled Thumb Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 464 Knurled Thumb Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 464 Knurled Thumb Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 464 knurled thumb screws is 10,000 pieces (applies to the standard sizes and finishes for din 464 knurled thumb screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 464 knurled thumb screws run 3–7 days. Quantities or variants of din 464 knurled thumb screws outside the standard range are confirmed at quotation.

Storage & shipping

DIN 464 Knurled Thumb Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 464 knurled thumb screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why does the knurl pitch have its own column in the table?

Because the knurl is functional geometry, not decoration: the pitch — 0.5 mm up to M2.5, 0.6 mm through most of the range, 0.8 mm at M10 — sets how many ridges the fingertips engage and therefore how much grip the head delivers for its diameter. A finer pitch on a small head gives more contact edges for the same circumference; a coarser pitch on large heads resists clogging with debris. If a drawing omits the knurl callout, the pitch is what a substitute supplier is most likely to get wrong while looking dimensionally identical — so specify it alongside d k and h when quoting, and confirm replacements against all three, not just the head diameter.

What is the MOQ and lead time for these screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for DIN 464 Knurled Thumb Screws?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 464 Knurled Thumb Screws state?

State the full designation (DIN 464), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 464 Knurled Thumb Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your DIN 464 Knurled Thumb Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.