ASME B18.6.3 UNC Slotted Round Head Machine Screws

Slotted round head machine screws per ASME B18.6.3, UNC thread — #1 through 3/4 in basic diameter in steel or stainless steel. The traditional domed inch-series head: a half-sphere over a flat bearing face, driven by a flat blade.

Last updated: 2026-11

Request a Quote

ASME B18.6.3 UNC Slotted Round Head Machine Screws in an industrial setting
Illustrative image redrawn from real ASME B18.6.3 UNC Slotted Round Head Machine Screws product references — not a photograph of stocked items.

Specifications

The round head is the oldest machine screw head of the inch series: a domed half-sphere sitting on a flat bearing face, taller and narrower than a pan head, driven by a single slot. It remains the callout in legacy inch equipment, electrical hardware and restoration work — drawings that predate the pan-head adoption specify it, and replacement parts keep the designation. The collected ASME B18.6.3 table runs from #1 (0.0730 in basic diameter) through 3/4 in on UNC threads per inch: 40 TPI at #4, 24 at #10, 20 at 1/4. At #10 the head measures 0.359 in maximum diameter by 0.137 in maximum height, with a 0.060–0.050 in slot 0.087–0.065 in deep. Compared with the metric line, the geometry carries over — the DIN 7985 pan head and DIN 963 countersunk head are the metric counterparts most drawings pair with it. For driven assembly with powered drivers, the cross-recessed inch heads serve the same range; see the ASME B18.6.3 pan head page for the slotted alternative with a lower, wider dome.

Standard ASME B18.6.3 — slotted round head machine screws, UNC (unified coarse) thread
Size range #1 (0.0730 in) – 3/4 in (0.7500 in) basic diameter, UNC threads per inch
Dimensions at #4 (#4-40) dk (head diameter) max 0.211 in (min 0.193 in); k (head height) max 0.086 in (min 0.075 in); slot width n 0.039–0.031 in; slot depth t 0.058–0.044 in
Dimensions at #10 (#10-24) dk max 0.359 in (min 0.334 in); k max 0.137 in (min 0.123 in); slot width n 0.060–0.050 in; slot depth t 0.087–0.065 in
Dimensions at 1/4 (1/4-20) dk max 0.472 in (min 0.443 in); k max 0.175 in (min 0.160 in); slot width n 0.075–0.064 in; slot depth t 0.109–0.082 in
Materials Steel, stainless steel — grade and finish confirmed at quotation (tenant supply range)

Materials

  • Steel
  • Stainless steel

Ordering & documentation

Documents

Shipments of ASME B18.6.3 UNC Slotted Round Head Machine Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASME B18.6.3 UNC Slotted Round Head Machine Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASME B18.6.3 UNC Slotted Round Head Machine Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for asme b18.6.3 unc slotted round head machine screws is 10,000 pieces (applies to the standard sizes and finishes for asme b18.6.3 unc slotted round head machine screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for asme b18.6.3 unc slotted round head machine screws run 3–7 days. Quantities or variants of asme b18.6.3 unc slotted round head machine screws outside the standard range are confirmed at quotation.

Storage & shipping

ASME B18.6.3 UNC Slotted Round Head Machine Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store asme b18.6.3 unc slotted round head machine screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Round head or pan head — the two slotted domes, how do they differ?

Both are domed slotted heads, but the proportions differ: the round head is a taller half-sphere on a smaller seat, while the pan head is lower and wider with a flat top and a larger bearing circle — compare the collected tables, where #10 measures 0.359 in across by 0.137 in high as a round head against 0.373 in across by 0.110 in high as a pan head. Practically, the pan head gives more bearing and driver engagement in the same envelope, which is why modern drawings moved to it; the round head survives where legacy tooling, appearance or the original callout governs. Match the head form already in the assembly — the two are not interchangeable without a seating check.

Is ASME B18.6.3 the same as ANSI B18.6.3?

Yes — it is the same machine screw standard under its current publisher. Older drawings and catalogue pages print ANSI B18.6.3; the designation in force is ASME B18.6.3, and the dimension tables are the lineage those drawings were built to. Order against the designation your documentation prints and state gauge size, threads per inch and length explicitly.

What is the MOQ and lead time for these inch machine screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock gauge sizes, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these inch machine screws state?

State the standard designation (ASME B18.6.3 — often still called ANSI B18.6.3), gauge size and threads per inch (for example #4-40, #10-24, 1/4-20 UNC), length and head style, material and grade (steel or stainless; state the stainless grade such as 18-8/A2 or 316/A4 if specified), finish (plain, zinc plated, or other), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASME B18.6.3 UNC Slotted Round Head Machine Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ASME B18.6.3 UNC Slotted Round Head Machine Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.