DIN 6911 Hexagon Socket Screw Keys with Pilot
DIN 6911 hexagon socket screw keys (hex keys) with pilot, sizes 3 through 27
Last updated: 2026-11
Specifications
DIN 6911 specifies the L-shaped hexagon socket screw keys with a pilot point — the pilot at the short arm helps the key stay engaged in deep or blind hexagon sockets and locates the tip before torque is applied. This reference tabulates the collected source's size ladder from 3 to 27 mm across-flats: for each key size you get the across-flats s with its tolerance band, the across-corners e band that decides whether the key enters a worn socket, the overall length L 1, the pilot length L 2 and the pilot diameter d p. The across-flats column doubles as the selector for the socket screw it fits — a DIN 6911 size 6 key is the tool for an M 10 hexagon socket head cap screw — while the L 1 / L 2 ladder tells you how much reach and leverage the tool gives you at that size. The tables are grouped in size blocks as the source prints them (3 - 6, 8 - 12, 14 - 19, 22 - 27), carried verbatim including the source's empty second header cell where its "Size" label spans the two label columns. Key steel grade and hardness of the tool are per RFQ.
| Standard | DIN 6911 (hexagon socket screw keys with pilot), as tabulated by the collected source |
|---|---|
| Sizes covered | 3, 4, 5, 6, 8, 10, 12, 14, 17, 19, 22, 24, 27 mm across-flats |
| Across-flats s | Max/min tolerance band per size (max = nominal: 3, 4, 5, 6 … 27) |
| Across-corners e | Max/min band per size (e.g. size 6: 6.81 max / 6.71 min) |
| Lengths | Overall L 1 and pilot L 2, max/min per size (size 6: L 1 96/92, L 2 38/36) |
| Pilot diameter d p | Max/min per size (size 6: 2.94/2.88) |
| Not tabulated | Tool steel grade, hardness, finish — per RFQ |
| Size | 3 | 4 | 5 | 6 | |
|---|---|---|---|---|---|
| s | max | 3 | 4 | 5 | 6 |
| s | min | 2.96 | 3.95 | 4.95 | 5.95 |
| e | max | 3.39 | 4.53 | 5.67 | 6.81 |
| e | min | 3.31 | 4.44 | 5.58 | 6.71 |
| L 1 | max | 66 | 74 | 85 | 96 |
| L 1 | min | 62 | 70 | 81 | 92 |
| L 2 | max | 23 | 29 | 33 | 38 |
| L 2 | min | 21 | 27 | 31 | 36 |
| z | max | 1.2 | 1.3 | 1.6 | 2.6 |
| z | min | 1.1 | 1.2 | 1.5 | 2.5 |
| d p | max | 1.94 | 2.44 | 2.94 | 3.93 |
| d p | min | 1.88 | 2.38 | 2.88 | 3.855 |
- Row 2 (s): s max row repeats the key sizes from the header (3/4/5/6 etc.) — the source's own table prints s max equal to nominal, carried verbatim
- Row 1 (s): 'Size' header cell spans the two label columns in the source; the second header cell is empty, carried verbatim
| Size | 8 | 10 | 12 | |
|---|---|---|---|---|
| s | max | 8 | 10 | 12 |
| s | min | 7.94 | 9.94 | 11.89 |
| e | max | 9.09 | 11.37 | 13.65 |
| e | min | 8.97 | 11.23 | 13.44 |
| L 1 | max | 108 | 122 | 137 |
| L 1 | min | 102 | 116 | 131 |
| L 2 | max | 44 | 50 | 57 |
| L 2 | min | 42 | 48 | 55 |
| z | max | 2.8 | 3.2 | 3.5 |
| z | min | 2.7 | 3.08 | 3.38 |
| d p | max | 4.93 | 5.93 | 6.92 |
| d p | min | 4.855 | 5.855 | 6.83 |
- Row 2 (s): s max row repeats the key sizes from the header (3/4/5/6 etc.) — the source's own table prints s max equal to nominal, carried verbatim
- Row 1 (s): 'Size' header cell spans the two label columns in the source; the second header cell is empty, carried verbatim
| Size | 14 | 17 | 19 | |
|---|---|---|---|---|
| s | max | 14 | 17 | 19 |
| s | min | 13.89 | 16.89 | 18.87 |
| e | max | 15.93 | 19.35 | 21.63 |
| e | min | 15.7 | 19.09 | 21.32 |
| L 1 | max | 154 | 177 | 199 |
| L 1 | min | 147 | 170 | 192 |
| L 2 | max | 70 | 80 | 89 |
| L 2 | min | 67 | 77 | 86 |
| z | max | 3.6 | 4.5 | 5.5 |
| z | min | 3.48 | 4.38 | 5.38 |
| d p | max | 7.92 | 9.92 | 11.905 |
| d p | min | 7.83 | 9.83 | 11.795 |
- Row 2 (s): s max row repeats the key sizes from the header (3/4/5/6 etc.) — the source's own table prints s max equal to nominal, carried verbatim
- Row 1 (s): 'Size' header cell spans the two label columns in the source; the second header cell is empty, carried verbatim
| Size | 22 | 24 | 27 | |
|---|---|---|---|---|
| s | max | 22 | 24 | 27 |
| s | min | 21.87 | 23.87 | 26.87 |
| e | max | 25.05 | 27.33 | 30.75 |
| e | min | 24.71 | 26.97 | 30.36 |
| L 1 | max | 222 | 248 | 277 |
| L 1 | min | 210 | 236 | 265 |
| L 2 | max | 102 | 114 | 127 |
| L 2 | min | 97 | 109 | 122 |
| z | max | 6.5 | 6.5 | 8.5 |
| z | min | 6.35 | 6.35 | 8.35 |
| d p | max | 14.905 | 16.405 | 17.905 |
| d p | min | 14.795 | 16.295 | 17.795 |
- Row 2 (s): s max row repeats the key sizes from the header (3/4/5/6 etc.) — the source's own table prints s max equal to nominal, carried verbatim
- Row 1 (s): 'Size' header cell spans the two label columns in the source; the second header cell is empty, carried verbatim
Materials
- Hexagon socket screw keys are supplied in tool steel, commonly hardened; the collected table tabulates geometry only, so grade and hardness are quoted per RFQ
Ordering & documentation
Documents
Shipments of DIN 6911 Hexagon Socket Screw Keys with Pilot are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 6911 Hexagon Socket Screw Keys with Pilot orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 6911 Hexagon Socket Screw Keys with Pilot), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for din 6911 hexagon socket screw keys with pilot is 10,000 pieces (applies to the standard sizes and finishes for din 6911 hexagon socket screw keys with pilot; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 6911 hexagon socket screw keys with pilot run 3–7 days. Quantities or variants of din 6911 hexagon socket screw keys with pilot outside the standard range are confirmed at quotation.
Storage & shipping
DIN 6911 Hexagon Socket Screw Keys with Pilot are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 6911 hexagon socket screw keys with pilot dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Which DIN 6911 key size fits my socket head cap screw?
The key size equals the across-flats of the screw's hexagon socket, and for the common metric socket screw ladder the pairing is fixed: M 5 takes a 4 mm key, M 6 a 5 mm key, M 8 a 6 mm key, M 10 an 8 mm key, M 12 a 10 mm key, M 16 a 12 mm key and upward through the ladder tabulated here. Pick the key by the screw size on your assembly, then use the table for what the datasheet does not tell you: the tolerance bands (a size 6 key is 5.95 to 6 mm across flats, so it will still enter a socket worn to the max side of its own band) and the length/pilot geometry, which matters in deep countersunk sockets where the pilot length L 2 decides how far the key reaches before the arm bottoms out.
What does the pilot on a DIN 6911 key actually do?
The pilot is the short reduced-diameter point on the working end — d p sits well below the across-flats size (a 6 mm key has a 2.88 to 2.94 mm pilot). In a deep or blind socket, the pilot enters first and keeps the key centered while the hexagon portion engages, so you do not cam the key out of the socket and round the flats under torque; it also lets the key seat in sockets with a chamfered or slightly misaligned entry. That is why DIN 6911 keys are the choice for deep-reach socket screws in machine building, and why the table tabulates L 2 and d p alongside the lengths: if your assembly has a deep socket, check the pilot length against the socket depth before ordering the tool.
What is the MOQ and lead time for DIN 6911 Hexagon Socket Screw Keys with Pilot?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 6911 Hexagon Socket Screw Keys with Pilot state?
State the full designation (DIN 6911 (hexagon socket screw keys with pilot), as tabulated by the collected source), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 6911 Hexagon Socket Screw Keys with Pilot inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your DIN 6911 Hexagon Socket Screw Keys with Pilot
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support