Roll Form Tap Drill Chart — Unified Threads (UNC/UNF/UNEF/UN) at 65% Thread, 0-80 to 2-4.5, inch
Thread-forming (roll) tap hole sizes for Unified inch threads — 165 thread rows precomputed at 65% full thread with drill oversize included, each with theoretical hole size, selected drill, drill decimal, oversize allowance and expected hole, transcribed row-for-row from the collected chart.
Last updated: 2026-11
Specifications
Roll tapping forms the thread by displacing material instead of cutting it — no chips, stronger threads with a work-hardened flank, and no chip evacuation problem in blind holes. The price is that the hole must be sized for flow, not for cutting: the forming tap pushes material outward into the thread form, so the hole is larger than any cut-tap drill and depends on the percentage of full thread you want. The collected chart is precomputed at 65% thread — the common production compromise between tap torque and thread strength — with drill oversize included: hole size = basic tap O.D. − 0.0068 × (% full thread) / TPI, then a letter/number/fraction drill is picked and its expected oversize added. Reading rows: 1/4-20 UNC forms at 0.2279 in theoretical, drill #1 (0.2280), expected hole 0.2312 in; 10-32 UNF theoretical 0.1762, drill #17, expected 0.1759; 1/2-13 UNC theoretical 0.4660, drill 15/32, expected 0.4732 in. The ladder runs from 0-80 UNF up to 2-4.5, crossing UNC, UNF, UNEF, constant-pitch UN and a few UNS sizes in source order — one chart for the whole unified forming job. What it does not decide: whether your material forms at all (roll tapping needs ductile material — it is for steels, aluminum, brass, not gray cast iron), the exact percent of thread for your strength case, and the forming lubricant; those are process and RFQ decisions. The source's printed expected-hole values occasionally sit below its own theoretical value (flagged on the table) — reproduced verbatim.
| Method | Roll form (thread forming) tap drilling — theoretical hole size = basic tap O.D. − 0.0068 × (% full thread) / TPI (Machinery's Handbook chart method), precomputed at 65% full thread with drill oversize included |
|---|---|
| Coverage | 165 thread rows: Unified inch threads from 0-80 UNF to 2-4.5, spanning UNC, UNF, UNEF, constant-pitch UN and UNS sizes in source order |
| Per-row data (in) | Theoretical hole size, selected drill (letter/number/fraction), drill decimal equivalent, drill oversize allowance, expected hole size — examples: 10-32 UNF → drill #17, expected 0.1759; 1/4-20 UNC → drill #1, expected 0.2312; 1/2-13 UNC → drill 15/32, expected 0.4732 |
| Why not cut-tap drills | Forming displaces material into the thread — a cut-tap drill size leaves the hole undersized, over-loads the forming tap and breaks it (source warning, reproduced) |
| % thread / material suitability / lubricant | Chart is fixed at 65%; other percentages and material-formability calls are not tabulated — per RFQ (state alloy, hardness and thread % requirement) |
| Thread | Series | % Full Thread | Theoretical Hole Size (in) | Drill | Drill Decimal (in) | Drill Oversize (in) | Expected Hole Size (in) |
|---|---|---|---|---|---|---|---|
| 0-80 | UNF | 65 | 0.0545 | 55 | 0.0520 | 0.0023 | 0.0543 |
| 1-64 | UNC | 65 | 0.0661 | 52 | 0.0635 | 0.0024 | 0.0659 |
| 1-72 | UNF | 65 | 0.0669 | 52 | 0.0635 | 0.0024 | 0.0659 |
| 2-56 | UNC | 65 | 0.0781 | 48 | 0.0760 | 0.0025 | 0.0785 |
| 2-64 | UNF | 65 | 0.0791 | 48 | 0.0760 | 0.0025 | 0.0785 |
| 3-48 | UNC | 65 | 0.0898 | 44 | 0.0860 | 0.0025 | 0.0885 |
| 3-56 | UNF | 65 | 0.0911 | 43 | 0.0890 | 0.0025 | 0.0915 |
| 4-40 | UNC | 65 | 0.1009 | 40 | 0.0980 | 0.0026 | 0.1006 |
| 4-48 | UNF | 65 | 0.1028 | 39 | 0.0995 | 0.0026 | 0.1021 |
| 5-40 | UNC | 65 | 0.1139 | 34 | 0.1110 | 0.0026 | 0.1136 |
| 5-44 | UNF | 65 | 0.1150 | 33 | 0.1130 | 0.0026 | 0.1156 |
| 6-32 | UNC | 65 | 0.1242 | 31 | 0.1200 | 0.0027 | 0.1227 |
| 6-40 | UNF | 65 | 0.1270 | 1/8 | 0.1250 | 0.0027 | 0.1277 |
| 8-32 | UNC | 65 | 0.1502 | 26 | 0.1470 | 0.0028 | 0.1498 |
| 8-36 | UNF | 65 | 0.1517 | 25 | 0.1495 | 0.0028 | 0.1523 |
| 10-24 | UNC | 65 | 0.1716 | 18 | 0.1695 | 0.0029 | 0.1724 |
| 10-32 | UNF | 65 | 0.1762 | 17 | 0.1730 | 0.0029 | 0.1759 |
| 12-24 | UNC | 65 | 0.1976 | 10 | 0.1935 | 0.0030 | 0.1965 |
| 12-28 | UNF | 65 | 0.2002 | 9 | 0.1960 | 0.0030 | 0.1990 |
| 12-32 | UNEF | 65 | 0.2022 | 8 | 0.1990 | 0.0031 | 0.2021 |
| 1/4-20 | UNC | 65 | 0.2279 | 1 | 0.2280 | 0.0032 | 0.2312 |
| 1/4-28 | UNF | 65 | 0.2342 | A | 0.2340 | 0.0032 | 0.2372 |
| 1/4-32 | UNEF | 65 | 0.2362 | A | 0.2340 | 0.0032 | 0.2372 |
| 1/4-36 | UNS | 65 | 0.2377 | 15/64 | 0.2344 | 0.0032 | 0.2376 |
| 5/16-18 | UNC | 65 | 0.2879 | 9/32 | 0.2812 | 0.0034 | 0.2846 |
| 5/16-20 | UN | 65 | 0.2904 | L | 0.2900 | 0.0035 | 0.2935 |
| 5/16-24 | UNF | 65 | 0.2941 | L | 0.2900 | 0.0035 | 0.2935 |
| 5/16-32 | UNEF | 65 | 0.2987 | M | 0.2950 | 0.0035 | 0.2985 |
| 5/16-36 | UNS | 65 | 0.3002 | 19/64 | 0.2969 | 0.0035 | 0.3004 |
| 3/8-16 | UNC | 65 | 0.3474 | 11/32 | 0.3438 | 0.0038 | 0.3476 |
| 3/8-20 | UN | 65 | 0.3529 | S | 0.3480 | 0.0038 | 0.3518 |
| 3/8-24 | UNF | 65 | 0.3566 | S | 0.3480 | 0.0038 | 0.3518 |
| 3/8-28 | UN | 65 | 0.3592 | T | 0.3580 | 0.0038 | 0.3618 |
| 3/8-32 | UNEF | 65 | 0.3612 | T | 0.3580 | 0.0038 | 0.3618 |
| 3/8-36 | UNS | 65 | 0.3627 | 23/64 | 0.3594 | 0.0038 | 0.3632 |
| 7/16-14 | UNC | 65 | 0.4059 | Y | 0.4040 | 0.0040 | 0.4080 |
| 7/16-16 | UN | 65 | 0.4099 | 13/32 | 0.4062 | 0.0040 | 0.4102 |
| 7/16-20 | UNF | 65 | 0.4154 | Z | 0.4130 | 0.0041 | 0.4171 |
| 7/16-28 | UNEF | 65 | 0.4217 | 27/64 | 0.4219 | 0.0041 | 0.4260 |
| 7/16-32 | UN | 65 | 0.4237 | 27/64 | 0.4219 | 0.0041 | 0.4260 |
| 1/2-12 | UNS | 65 | 0.4632 | 29/64 | 0.4531 | 0.0043 | 0.4574 |
| 1/2-13 | UNC | 65 | 0.4660 | 15/32 | 0.4688 | 0.0044 | 0.4732 |
| 1/2-16 | UN | 65 | 0.4724 | 15/32 | 0.4688 | 0.0044 | 0.4732 |
| 1/2-20 | UNF | 65 | 0.4779 | 15/32 | 0.4688 | 0.0044 | 0.4732 |
| 1/2-28 | UNEF | 65 | 0.4842 | 31/64 | 0.4844 | 0.0044 | 0.4888 |
| 1/2-32 | UN | 65 | 0.4862 | 31/64 | 0.4844 | 0.0044 | 0.4888 |
| 9/16-12 | UNC | 65 | 0.5257 | 33/64 | 0.5156 | 0.0046 | 0.5202 |
| 9/16-16 | UN | 65 | 0.5349 | 17/32 | 0.5312 | 0.0046 | 0.5358 |
| 9/16-18 | UNF | 65 | 0.5379 | 17/32 | 0.5312 | 0.0046 | 0.5358 |
| 9/16-20 | UN | 65 | 0.5404 | 17/32 | 0.5312 | 0.0046 | 0.5358 |
| 9/16-24 | UNEF | 65 | 0.5441 | 35/64 | 0.5469 | 0.0047 | 0.5516 |
| 9/16-28 | UN | 65 | 0.5467 | 35/64 | 0.5469 | 0.0047 | 0.5516 |
| 9/16-32 | UN | 65 | 0.5487 | 35/64 | 0.5469 | 0.0047 | 0.5516 |
| 5/8-11 | UNC | 65 | 0.5848 | 37/64 | 0.5781 | 0.0049 | 0.5830 |
| 5/8-12 | UN | 65 | 0.5882 | 37/64 | 0.5781 | 0.0049 | 0.5830 |
| 5/8-16 | UN | 65 | 0.5974 | 19/32 | 0.5938 | 0.0050 | 0.5988 |
| 5/8-18 | UNF | 65 | 0.6004 | 19/32 | 0.5938 | 0.0050 | 0.5988 |
| 5/8-20 | UN | 65 | 0.6029 | 19/32 | 0.5938 | 0.0050 | 0.5988 |
| 5/8-24 | UNEF | 65 | 0.6066 | 19/32 | 0.5938 | 0.0050 | 0.5988 |
| 5/8-28 | UN | 65 | 0.6092 | 39/64 | 0.6094 | 0.0050 | 0.6144 |
| 5/8-32 | UN | 65 | 0.6112 | 39/64 | 0.6094 | 0.0050 | 0.6144 |
| 11/16-12 | UN | 65 | 0.6507 | 41/64 | 0.6406 | 0.0052 | 0.6458 |
| 11/16-16 | UN | 65 | 0.6599 | 21/32 | 0.6562 | 0.0052 | 0.6614 |
| 11/16-20 | UN | 65 | 0.6654 | 21/32 | 0.6562 | 0.0052 | 0.6614 |
| 11/16-24 | UNEF | 65 | 0.6691 | 21/32 | 0.6562 | 0.0052 | 0.6614 |
| 11/16-28 | UN | 65 | 0.6717 | 43/64 | 0.6719 | 0.0053 | 0.6772 |
| 11/16-32 | UN | 65 | 0.6737 | 43/64 | 0.6719 | 0.0053 | 0.6772 |
| 3/4-10 | UNC | 65 | 0.7058 | 45/64 | 0.7031 | 0.0055 | 0.7086 |
| 3/4-12 | UN | 65 | 0.7132 | 45/64 | 0.7031 | 0.0055 | 0.7086 |
| 3/4-16 | UNF | 65 | 0.7224 | 23/32 | 0.7188 | 0.0056 | 0.7244 |
| 3/4-20 | UNEF | 65 | 0.7279 | 23/32 | 0.7188 | 0.0056 | 0.7244 |
| 3/4-28 | UN | 65 | 0.7342 | 47/64 | 0.7344 | 0.0056 | 0.7400 |
| 3/4-32 | UN | 65 | 0.7362 | 47/64 | 0.7344 | 0.0056 | 0.7400 |
| 13/16-12 | UN | 65 | 0.7757 | 49/64 | 0.7656 | 0.0058 | 0.7714 |
| 13/16-16 | UN | 65 | 0.7849 | 25/32 | 0.7812 | 0.0058 | 0.7870 |
| 13/16-20 | UNEF | 65 | 0.7904 | 25/32 | 0.7812 | 0.0058 | 0.7870 |
| 13/16-28 | UN | 65 | 0.7967 | 51/64 | 0.7969 | 0.0059 | 0.8028 |
| 13/16-32 | UN | 65 | 0.7987 | 51/64 | 0.7969 | 0.0059 | 0.8028 |
| 7/8-9 | UNC | 65 | 0.8259 | 13/16 | 0.8125 | 0.0060 | 0.8185 |
| 7/8-12 | UN | 65 | 0.8382 | 53/64 | 0.8281 | 0.0061 | 0.8342 |
| 7/8-14 | UNF | 65 | 0.8434 | 27/32 | 0.8438 | 0.0062 | 0.8500 |
| 7/8-16 | UN | 65 | 0.8474 | 27/32 | 0.8438 | 0.0062 | 0.8500 |
| 7/8-20 | UNEF | 65 | 0.8529 | 27/32 | 0.8438 | 0.0062 | 0.8500 |
| 7/8-28 | UN | 65 | 0.8592 | 55/64 | 0.8594 | 0.0062 | 0.8656 |
| 7/8-32 | UN | 65 | 0.8612 | 55/64 | 0.8594 | 0.0062 | 0.8656 |
| 15/16-12 | UN | 65 | 0.9007 | 57/64 | 0.8906 | 0.0064 | 0.8970 |
| 15/16-16 | UN | 65 | 0.9099 | 29/32 | 0.9062 | 0.0064 | 0.9126 |
| 15/16-20 | UNEF | 65 | 0.9154 | 29/32 | 0.9062 | 0.0064 | 0.9126 |
| 15/16-28 | UN | 65 | 0.9217 | 59/64 | 0.9219 | 0.0065 | 0.9284 |
| 15/16-32 | UN | 65 | 0.9237 | 59/64 | 0.9219 | 0.0065 | 0.9284 |
| 1-8 | UNC | 65 | 0.9447 | 15/16 | 0.9375 | 0.0066 | 0.9441 |
| 1-12 | UNF | 65 | 0.9632 | 61/64 | 0.9531 | 0.0067 | 0.9598 |
| 1-14 | UNS | 65 | 0.9684 | 31/32 | 0.9688 | 0.0068 | 0.9756 |
| 1-16 | UN | 65 | 0.9724 | 31/32 | 0.9688 | 0.0068 | 0.9756 |
| 1-20 | UNEF | 65 | 0.9779 | 31/32 | 0.9688 | 0.0068 | 0.9756 |
| 1-28 | UN | 65 | 0.9842 | 63/64 | 0.9844 | 0.0068 | 0.9912 |
| 1-32 | UN | 65 | 0.9862 | 63/64 | 0.9844 | 0.0068 | 0.9912 |
| 1 1/16-12 | UN | 65 | 1.0257 | 1 1/64 | 1.0156 | 0.0070 | 1.0226 |
| 1 1/16-16 | UN | 65 | 1.0349 | 1 1/32 | 1.0312 | 0.0070 | 1.0382 |
| 1 1/16-18 | UNEF | 65 | 1.0379 | 1 1/32 | 1.0312 | 0.0070 | 1.0382 |
| 1 1/8-7 | UNC | 65 | 1.0619 | 1 3/64 | 1.0469 | 0.0071 | 1.0540 |
| 1 1/8-8 | UN | 65 | 1.0697 | 1 1/16 | 1.0625 | 0.0072 | 1.0697 |
| 1 1/8-12 | UNF | 65 | 1.0882 | 1 5/64 | 1.0781 | 0.0073 | 1.0854 |
| 1 1/8-16 | UN | 65 | 1.0974 | 1 3/32 | 1.0938 | 0.0074 | 1.1012 |
| 1 1/8-18 | UNEF | 65 | 1.1004 | 1 3/32 | 1.0938 | 0.0074 | 1.1012 |
| 1 1/8-20 | UN | 65 | 1.1029 | 1 3/32 | 1.0938 | 0.0074 | 1.1012 |
| 1 1/8-28 | UN | 65 | 1.1092 | 1 7/64 | 1.1094 | 0.0074 | 1.1168 |
| 1 3/16-12 | UN | 65 | 1.1507 | 1 9/64 | 1.1406 | 0.0076 | 1.1482 |
| 1 3/16-16 | UN | 65 | 1.1599 | 1 5/32 | 1.1562 | 0.0076 | 1.1638 |
| 1 3/16-18 | UNEF | 65 | 1.1629 | 1 5/32 | 1.1562 | 0.0076 | 1.1638 |
| 1 1/4-7 | UNC | 65 | 1.1869 | 1 11/64 | 1.1719 | 0.0077 | 1.1796 |
| 1 1/4-8 | UN | 65 | 1.1947 | 1 3/16 | 1.1875 | 0.0078 | 1.1953 |
| 1 1/4-12 | UNF | 65 | 1.2132 | 1 13/64 | 1.2031 | 0.0079 | 1.2110 |
| 1 1/4-16 | UN | 65 | 1.2224 | 1 7/32 | 1.2188 | 0.0080 | 1.2268 |
| 1 1/4-18 | UNEF | 65 | 1.2254 | 1 7/32 | 1.2188 | 0.0080 | 1.2268 |
| 1 1/4-20 | UN | 65 | 1.2279 | 1 7/32 | 1.2188 | 0.0080 | 1.2268 |
| 1 1/4-28 | UN | 65 | 1.2342 | 1 7/32 | 1.2188 | 0.0080 | 1.2268 |
| 1 5/16-12 | UN | 65 | 1.2757 | 1 17/64 | 1.2656 | 0.0082 | 1.2738 |
| 1 5/16-16 | UN | 65 | 1.2849 | 1 9/32 | 1.2812 | 0.0082 | 1.2894 |
| 1 5/16-18 | UNEF | 65 | 1.2879 | 1 9/32 | 1.2812 | 0.0082 | 1.2894 |
| 1 3/8-6 | UNC | 65 | 1.3013 | 1 19/64 | 1.2969 | 0.0083 | 1.3052 |
| 1 3/8-8 | UN | 65 | 1.3197 | 1 5/16 | 1.3125 | 0.0084 | 1.3209 |
| 1 3/8-12 | UNF | 65 | 1.3382 | 1 21/64 | 1.3281 | 0.0085 | 1.3366 |
| 1 3/8-16 | UN | 65 | 1.3474 | 1 11/32 | 1.3438 | 0.0086 | 1.3524 |
| 1 3/8-18 | UNEF | 65 | 1.3504 | 1 11/32 | 1.3438 | 0.0086 | 1.3524 |
| 1 3/8-20 | UN | 65 | 1.3529 | 1 11/32 | 1.3438 | 0.0086 | 1.3524 |
| 1 3/8-28 | UN | 65 | 1.3592 | 1 11/32 | 1.3438 | 0.0086 | 1.3524 |
| 1 7/16-12 | UN | 65 | 1.4007 | 1 25/64 | 1.3906 | 0.0088 | 1.3994 |
| 1 7/16-16 | UN | 65 | 1.4099 | 1 13/32 | 1.4062 | 0.0088 | 1.4150 |
| 1 7/16-18 | UNEF | 65 | 1.4129 | 1 13/32 | 1.4062 | 0.0088 | 1.4150 |
| 1 1/2-6 | UNC | 65 | 1.4263 | 1 27/64 | 1.4219 | 0.0089 | 1.4308 |
| 1 1/2-8 | UN | 65 | 1.4447 | 1 7/16 | 1.4375 | 0.0090 | 1.4465 |
| 1 1/2-12 | UNF | 65 | 1.4632 | 1 29/64 | 1.4531 | 0.0091 | 1.4622 |
| 1 1/2-16 | UN | 65 | 1.4724 | 1 15/32 | 1.4688 | 0.0092 | 1.4780 |
| 1 1/2-18 | UNEF | 65 | 1.4754 | 1 15/32 | 1.4688 | 0.0092 | 1.4780 |
| 1 1/2-20 | UN | 65 | 1.4779 | 1 15/32 | 1.4688 | 0.0092 | 1.4780 |
| 1 1/2-28 | UN | 65 | 1.4842 | 1 15/32 | 1.4688 | 0.0092 | 1.4780 |
| 1 9/16-16 | UN | 65 | 1.5349 | 1 17/32 | 1.5312 | 0.0094 | 1.5406 |
| 1 9/16-18 | UNEF | 65 | 1.5379 | 1 17/32 | 1.5312 | 0.0094 | 1.5406 |
| 1 5/8-8 | UN | 65 | 1.5697 | 1 9/16 | 1.5625 | 0.0096 | 1.5721 |
| 1 5/8-12 | UN | 65 | 1.5882 | 1 37/64 | 1.5781 | 0.0097 | 1.5878 |
| 1 5/8-16 | UN | 65 | 1.5974 | 1 19/32 | 1.5938 | 0.0098 | 1.6036 |
| 1 5/8-18 | UNEF | 65 | 1.6004 | 1 19/32 | 1.5938 | 0.0098 | 1.6036 |
| 1 5/8-20 | UN | 65 | 1.6029 | 1 19/32 | 1.5938 | 0.0098 | 1.6036 |
| 1 11/16-16 | UN | 65 | 1.6599 | 1 21/32 | 1.6562 | 0.0100 | 1.6662 |
| 1 11/16-18 | UNEF | 65 | 1.6629 | 1 21/32 | 1.6562 | 0.0100 | 1.6662 |
| 1 3/4-5 | UNC | 65 | 1.6616 | 1 21/32 | 1.6562 | 0.0100 | 1.6662 |
| 1 3/4-6 | UN | 65 | 1.6763 | 1 43/64 | 1.6719 | 0.0101 | 1.6820 |
| 1 3/4-8 | UN | 65 | 1.6947 | 1 11/16 | 1.6875 | 0.0102 | 1.6977 |
| 1 3/4-12 | UN | 65 | 1.7132 | 1 45/64 | 1.7031 | 0.0103 | 1.7134 |
| 1 3/4-16 | UN | 65 | 1.7224 | 1 23/32 | 1.7188 | 0.0104 | 1.7292 |
| 1 3/4-20 | UN | 65 | 1.7279 | 1 23/32 | 1.7188 | 0.0104 | 1.7292 |
| 1 13/16-16 | UN | 65 | 1.7849 | 1 25/32 | 1.7812 | 0.0106 | 1.7918 |
| 1 7/8-6 | UN | 65 | 1.8013 | 1 25/32 | 1.7812 | 0.0106 | 1.7918 |
| 1 7/8-8 | UN | 65 | 1.8197 | 1 13/16 | 1.8125 | 0.0108 | 1.8233 |
| 1 7/8-12 | UN | 65 | 1.8382 | 1 13/16 | 1.8125 | 0.0108 | 1.8233 |
| 1 7/8-16 | UN | 65 | 1.8474 | 1 27/32 | 1.8438 | 0.0110 | 1.8548 |
| 1 7/8-20 | UN | 65 | 1.8529 | 1 27/32 | 1.8438 | 0.0110 | 1.8548 |
| 1 15/16-16 | UN | 65 | 1.9099 | 1 29/32 | 1.9062 | 0.0112 | 1.9174 |
| 2-6 | UN | 65 | 1.9263 | 1 29/32 | 1.9062 | 0.0112 | 1.9174 |
| 2-8 | UN | 65 | 1.9447 | 1 15/16 | 1.9375 | 0.0114 | 1.9489 |
| 2-12 | UN | 65 | 1.9632 | 1 15/16 | 1.9375 | 0.0114 | 1.9489 |
| 2-16 | UN | 65 | 1.9724 | 1 31/32 | 1.9688 | 0.0116 | 1.9804 |
| 2-20 | UN | 65 | 1.9779 | 1 31/32 | 1.9688 | 0.0116 | 1.9804 |
| 2-4.5 | UNC | 65 | 1.9902 | 1 31/32 | 1.9688 | 0.0116 | 1.9804 |
- Row 165 (2-4.5): Thread designation printed "2-4.5" with series UNC — a 4.5 TPI thread on a 2 in diameter is outside the standard UNC series; reproduced as printed, verify before ordering tooling.
Materials
- Roll forming needs ductile workpiece material — plain and alloy steels, aluminum alloys, brass, bronze; hard or brittle materials (gray cast iron, some stainless) do not form cleanly. Confirm the alloy at RFQ before choosing forming over cutting taps
Ordering & documentation
Documents
Shipments of Roll Form Tap Drill Chart — Unified Threads (UNC/UNF/UNEF/UN) at 65% Thread, 0-80 to 2-4.5, inch are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Roll Form Tap Drill Chart — Unified Threads (UNC/UNF/UNEF/UN) at 65% Thread, 0-80 to 2-4.5, inch orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (Roll Form Tap Drill Chart — Unified Threads (UNC/UNF/UNEF/UN) at 65% Thread, 0-80 to 2-4.5, inch), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for roll form tap drill chart — unified threads (unc/unf/unef/un) at 65% thread, 0-80 to 2-4.5, inch is 10,000 pieces (applies to the standard sizes and finishes for roll form tap drill chart — unified threads (unc/unf/unef/un) at 65% thread, 0-80 to 2-4.5, inch; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for roll form tap drill chart — unified threads (unc/unf/unef/un) at 65% thread, 0-80 to 2-4.5, inch run 3–7 days. Quantities or variants of roll form tap drill chart — unified threads (unc/unf/unef/un) at 65% thread, 0-80 to 2-4.5, inch outside the standard range are confirmed at quotation.
Storage & shipping
Roll Form Tap Drill Chart — Unified Threads (UNC/UNF/UNEF/UN) at 65% Thread, 0-80 to 2-4.5, inch are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store roll form tap drill chart — unified threads (unc/unf/unef/un) at 65% thread, 0-80 to 2-4.5, inch dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Why is the roll-form hole bigger than the cut-tap drill, and how do I pick between 65% and another thread percentage?
A cut tap removes metal to carve the thread, so the drill only needs to leave the right amount to carve away; a forming tap has nothing to remove — it must push enough material to fill the thread profile completely, which means starting from a bigger hole that leaves exactly the displacement volume the thread form needs. That is why the same 1/4-20 thread takes a #7 drill (0.201 in) for cutting but a #1 (0.228 in) for forming — the chart above is the forming side. The percentage of full thread is the lever trading torque against strength: a higher percentage makes a taller, stronger thread but the forming tap pushes far more material, torque climbs steeply and tap breakage risk follows; 65% — where this chart is fixed — is the widely used production point because thread strength rises faster than percentage at first and flattens out, so the last 20% of thread height costs disproportionate torque for marginal strength. If your joint calculation genuinely needs more (thin wall, high clamp load), that is an RFQ conversation: state the alloy, hardness, thread size and the strength requirement, and the forming percentage and hole size can be recalculated from the same formula before tooling is committed. And verify the material forms at all — ductile steels and aluminums form cleanly; gray cast iron and brittle alloys chip instead of flow and must be cut.
What is the MOQ and lead time for threaded parts and tooling referenced by this chart?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Confirm the exact schedule against quantity, size mix and any tooling items at quotation.
What is the MOQ and lead time for Roll Form Tap Drill Chart — Unified Threads (UNC/UNF/UNEF/UN) at 65% Thread, 0-80 to 2-4.5, inch?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for Roll Form Tap Drill Chart — Unified Threads (UNC/UNF/UNEF/UN) at 65% Thread, 0-80 to 2-4.5, inch state?
State the full designation (Roll Form Tap Drill Chart — Unified Threads (UNC/UNF/UNEF/UN) at 65% Thread, 0-80 to 2-4.5, inch), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your Roll Form Tap Drill Chart — Unified Threads (UNC/UNF/UNEF/UN) at 65% Thread, 0-80 to 2-4.5, inch inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your Roll Form Tap Drill Chart — Unified Threads (UNC/UNF/UNEF/UN) at 65% Thread, 0-80 to 2-4.5, inch
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support