DIN 561 Set Screws, Small Hexagon, Full Dog Point
DIN 561 hexagon set screws with small hexagon and full dog point, M6 to M56: pitch, dp, e min, k, reduced s, dog point z and the commercial length ladder to 300 mm.
Last updated: 2026-11
Specifications
DIN 561 is the large-set-screw standard — M6 up to M56 — with the small hexagon the big sizes need (s nom=max 75 and e min 83.91 at M56, against k nom 40), the full dog point z (min=nom 28 at M56) that locates in a matching hole instead of biting the shaft, and the thread data P / a max / dp nom=max per size. The collected 02/1995-edition table carries all of it plus the commercial length ladder from 12 to 300 mm — the long relative lengths this standard exists for: a dog-point screw engaged deep in a groove needs body length, not head clearance. Dog points set collars, gears and sprockets where the point rides in a drilled dimple; the full form spreads the holding load and survives re-tightening, unlike a cone point.
| Standard / scope | DIN 561 hexagon set screws, small hexagon, full dog point — M6 to M56, edition 02/1995 (supersedes 02/1985) |
|---|---|
| Thread / point | P, a max, dp nom=max per size; dog point z min=nom: 4 (M6-class) to 28 (M56) |
| Small hexagon | k nom and reduced s nom=max per size — s 75 / e min 83.91 / k 40 at M56 (smaller WAF than standard hex of the same thread) |
| Commercial lengths l | Ladder 12 to 300 mm across M6–M56; approximate mass per 1000 pcs (ρ=7,85 kg/dm³) tabulated |
| Not tabulated | Property class (45H-type for set screws), finish, point hardness — per RFQ |
| d thread size | P | a max | dp nom=max | e min | k nom | s nom=max | z min=nom | |||
|---|---|---|---|---|---|---|---|---|---|---|
| M 6 | 1 | 3 | 4 | 8.79 | 5 | 8 | 3 | |||
| M 8 | 1.25 | 3.75 | 5.5 | 11.05 | 6 | 10 | 4 | |||
| M 10 | 1.5 | 4.5 | 7 | 14.38 | 7 | 13 | 5 | |||
| M 12 | 1.75 | 5.25 | 8.5 | 17.77 | 9 | 16 | 6 | |||
| M 16 | 2 | 6 | 12 | 19.92 | 11 | 18 | 8 | |||
| M 20 | 2.5 | 7.5 | 15 | 26.75 | 14 | 24 | 10 | |||
| M 24 | 3 | 9 | 18 | 33.53 | 17 | 30 | 12 | |||
| M 30 | 3.5 | 10.5 | 23 | 39.98 | 21 | 36 | 15 | |||
| M 36 | 4 | 12 | 28 | 51.28 | 25 | 46 | 18 | |||
| M 42 | 4.5 | 13.5 | 32 | 61.31 | 30 | 55 | 21 | |||
| M 48 | 5 | 15 | 38 | 72.61 | 34 | 65 | 24 | |||
| M 56 | 5.5 | 16.5 | 45 | 83.91 | 40 | 75 | 28 |
- Source spanning title row carried verbatim: "Dimensions in mm - source DIN 561".
- Edition row carried from the source grid: "Publication date 02 - 1995 - Supersedes DIN 561: 02 - 1985".
- Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (11/8) — grid padded empty; per-row pre-pad widths: 11,11,8,8,8,8,8,8,8,8,8,8,8,8,8.
| d thread size | M6 | M8 | M10 | M12 | M16 | M20 | M24 | M30 | M36 | M42 | M48 | M56 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| nominal length l | ||||||||||||
| 12 | 4.26 | |||||||||||
| 14 | 4.6 | |||||||||||
| 16 | 4.95 | 8.66 | ||||||||||
| 18 | 5.3 | 9.3 | ||||||||||
| 20 | 5.65 | 9.94 | 17 | |||||||||
| 25 | 6.53 | 11.4 | 19.5 | 34.1 | ||||||||
| 30 | 7.38 | 13 | 22 | 37.7 | 62.6 | |||||||
| 35 | 14.6 | 24.4 | 41.2 | 69.1 | ||||||||
| 40 | 16.1 | 26.9 | 44.8 | 75.7 | 132 | |||||||
| 45 | 29.4 | 48.4 | 82.3 | 143 | 233 | |||||||
| 50 | 31.9 | 52 | 88.9 | 154 | 249 | |||||||
| 60 | 59.2 | 102 | 176 | 281 | 446 | |||||||
| 70 | 66.4 | 115 | 198 | 313 | 493 | |||||||
| 80 | 128 | 220 | 345 | 540 | 876 | 1320 | ||||||
| 90 | 142 | 242 | 377 | 587 | 944 | 1410 | 2040 | |||||
| 100 | 264 | 409 | 634 | 1010 | 1510 | 2160 | 3120 | |||||
| 120 | 473 | 727 | 1150 | 1700 | 2410 | 3450 | ||||||
| 140 | 821 | 1280 | 1890 | 2660 | 3780 | |||||||
| 160 | 914 | 1420 | 2080 | 2910 | 4110 | |||||||
| 180 | 1560 | 2270 | 3160 | 4440 | ||||||||
| 200 | 1690 | 2460 | 3410 | 4770 | ||||||||
| 220 | 2650 | 3660 | 5100 | |||||||||
| 240 | 2840 | 3910 | 5430 | |||||||||
| 260 | 3030 | 4160 | 5760 | |||||||||
| 280 | 4410 | 6090 | ||||||||||
| 300 | 4660 | 6420 |
- Source spanning title row carried verbatim: "DIN 561 - Approximate mass, in kg x1000 pcs, (ρ=7,85 kg/dm 3 ) - commercial items".
- Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (12/13/1/2/3/4/5/6/7/8/9/11) — grid padded empty; per-row pre-pad widths: 12,13,1,2,2,3,3,4,5,6,6,7,8,8,9,9,11,12,13,13,13,13,13,13,13,13,13,13,13.
Materials
- Set screws order in property class 45H alloy steel (hardened, with hardened point) as the default, unplated black or zinc-plated; stainless A2/A4 for corrosive locations at reduced torque. The dog point rides in a mating hole — state the hole diameter it must seat in when it differs from the standard z geometry, and the shaft/groove material, since galling is the failure mode on stainless-into-stainless
Ordering & documentation
Documents
Shipments of DIN 561 Set Screws, Small Hexagon, Full Dog Point are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 561 Set Screws, Small Hexagon, Full Dog Point orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 561 Set Screws, Small Hexagon, Full Dog Point), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for din 561 set screws, small hexagon, full dog point is 10,000 pieces (applies to the standard sizes and finishes for din 561 set screws, small hexagon, full dog point; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 561 set screws, small hexagon, full dog point run 3–7 days. Quantities or variants of din 561 set screws, small hexagon, full dog point outside the standard range are confirmed at quotation.
Storage & shipping
DIN 561 Set Screws, Small Hexagon, Full Dog Point are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 561 set screws, small hexagon, full dog point dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Why the small hexagon — and does that change the wrench I need?
Yes, deliberately: above the sizes covered by the ordinary socket set-screw standards, DIN 561 keeps the across-flats small so the head fits the boss diameters set-screws live in — the head is a hex drive, not a socket, so the wrench (not an allen key) is sized to the printed s column. At M56 that is s = 75, well under a standard M56 hex nut. Check your drawing's wrench size against the table before shipping tools to site; using the wrong (larger) s assumption is a classic site delay. The e min column gives the corner-to-corner check for the wrench fit.
When do I pick the full dog point over a cone or cup point?
When the part must stay located and re-adjustable. A cone point digs into the shaft and holds by brinelling — fine for permanent setting, destructive to the surface. The full dog point of DIN 561 engages a drilled hole in the shaft or a groove, holding by shear across the point diameter z; the joint survives repeated re-tightening, thermal cycling and slight rotation without chewing the mating face. The price is the extra machining: you drill the hole to match z. If you cannot machine the shaft, a cup or flat point set screw (registered separately) holds by bite instead.
What is the MOQ and lead time for DIN 561 Set Screws, Small Hexagon, Full Dog Point?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN 561 Set Screws, Small Hexagon, Full Dog Point state?
State the full designation (DIN 561 Set Screws, Small Hexagon, Full Dog Point), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 561 Set Screws, Small Hexagon, Full Dog Point inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your DIN 561 Set Screws, Small Hexagon, Full Dog Point
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support