ASME B1.1 UNC Thread Limiting Dimensions — External 2A / Internal 2B (#1 – 4 in)
ASME B1.1 unified coarse (UNC) thread limiting dimensions — external class 2A and internal class 2B major, pitch and minor diameter max/min per size from #1 to 4 in, transcribed row-for-row from the collected charts.
Last updated: 2026-11
Specifications
Where the UNC pitch chart tells you which thread a size carries, this page gives the numbers you check parts against: the actual limiting diameters of the unified coarse series, external and internal. The collected charts print both halves of the common 2A/2B pair from #1 to 4 in. Reading a row, the workhorse 1/4-20: an external 2A thread runs major diameter 0.2489/0.2408 in max/min, pitch diameter 0.2164/0.2127, minor max 0.1894 — while the mating internal 2B runs major min 0.2500, pitch diameter 0.2224/0.2175, minor 0.2070/0.1960. Those are the numbers a thread-ring and thread-plug gage set enforces at goods-in. The 2A/2B pairing is deliberate: both classes carry allowance toward clearance, so a commercial bolt reliably threads into a commercial tapped hole, with room for plating and for the manufacturing spread of volume production. The charts cover UNC only — UNEF and the constant-pitch UN series stay with the pitch chart page — and class 3A/3B, used where tighter flank control is specified, is not tabulated by the collected charts — per RFQ. Source quirks (the #2-56 internal chart printing "0.667" for D1 min) are reproduced as printed and footnoted on the table below.
| Standard | ASME B1.1 — unified inch screw threads, UNC (coarse) series limiting dimensions |
|---|---|
| Size range | #1 – 4 in; external (2A) 34 rows, internal (2B) 34 rows, repeated source header blocks merged |
| External 2A limits (in) | Per row: major d max/min, pitch d2 max/min, minor max; example 1/4-20: 0.2489/0.2408, 0.2164/0.2127, 0.1894 |
| Internal 2B limits (in) | Per row: major min, pitch D2 max/min, minor D1 max/min; example 1/4-20: 0.2500, 0.2224/0.2175, 0.2070/0.1960 |
| Other classes / series | 3A/3B and UNEF / constant-pitch limits not tabulated by the collected charts — per RFQ (pitch selection: see the ASME B1.1 pitch chart page) |
| Nominal Designation | TPI | Class | d — Major (max) | d (min) | d2 — Pitch (max) | d2 (min) | Minor Dia. (max) |
|---|---|---|---|---|---|---|---|
| #1 - 64 | 64 | 2A | 0.0724 | 0.0686 | 0.0623 | 0.0603 | 0.0538 |
| #2 - 56 | 56 | 2A | 0.0854 | 0.0813 | 0.0738 | 0.0717 | 0.0642 |
| #3 - 48 | 48 | 2A | 0.0983 | 0.0938 | 0.0848 | 0.0825 | 0.0734 |
| #4 - 40 | 40 | 2A | 0.1112 | 0.1061 | 0.0950 | 0.0925 | 0.0814 |
| #5 - 40 | 40 | 2A | 0.1242 | 0.1191 | 0.1080 | 0.1054 | 0.0944 |
| #6 - 32 | 32 | 2A | 0.1372 | 0.1312 | 0.1169 | 0.1141 | 0.1000 |
| #8 - 32 | 32 | 2A | 0.1631 | 0.1571 | 0.1428 | 0.1399 | 0.1259 |
| #10 - 24 | 24 | 2A | 0.1890 | 0.1818 | 0.1619 | 0.1586 | 0.1394 |
| #12 - 24 | 24 | 2A | 0.2150 | 0.2078 | 0.1879 | 0.1845 | 0.1654 |
| 1/4 - 20 | 20 | 2A | 0.2489 | 0.2408 | 0.2164 | 0.2127 | 0.1894 |
| 5/16 - 18 | 18 | 2A | 0.3113 | 0.3026 | 0.2752 | 0.2712 | 0.2452 |
| 3/8 - 16 | 16 | 2A | 0.3737 | 0.3643 | 0.3331 | 0.3287 | 0.2992 |
| 7/16 - 14 | 14 | 2A | 0.4361 | 0.4258 | 0.3897 | 0.3850 | 0.3511 |
| 1/2 - 13 | 13 | 2A | 0.4985 | 0.4876 | 0.4485 | 0.4435 | 0.4069 |
| 9/16 - 12 | 12 | 2A | 0.5609 | 0.5495 | 0.5068 | 0.5016 | 0.4617 |
| 5/8 - 11 | 11 | 2A | 0.6234 | 0.6113 | 0.5644 | 0.5589 | 0.5152 |
| 3/4 - 10 | 10 | 2A | 0.7482 | 0.7353 | 0.6832 | 0.6773 | 0.6291 |
| 7/8 - 9 | 9 | 2A | 0.8731 | 0.8592 | 0.8009 | 0.7946 | 0.7408 |
| 1 - 8 | 8 | 2A | 0.9980 | 0.9830 | 0.9168 | 0.9100 | 0.8492 |
| 1 1/8 - 7 | 7 | 2A | 1.1228 | 1.1064 | 1.0300 | 1.0228 | 0.9527 |
| 1 1/4 - 7 | 7 | 2A | 1.2478 | 1.2314 | 1.1550 | 1.1476 | 1.0777 |
| 1 3/8 - 6 | 6 | 2A | 1.3726 | 1.3544 | 1.2643 | 1.2563 | 1.1742 |
| 1 1/2 - 6 | 6 | 2A | 1.4976 | 1.4794 | 1.3893 | 1.3812 | 1.2992 |
| 1 3/4 - 5 | 5 | 2A | 1.7473 | 1.7268 | 1.6174 | 1.6085 | 1.5092 |
| 2 - 4 1/2 | 4.5 | 2A | 1.9971 | 1.9751 | 1.8528 | 1.8433 | 1.7324 |
| 2 1/4 - 4 1/2 | 4.5 | 2A | 2.2471 | 2.2251 | 2.1028 | 2.0931 | 1.9824 |
| 2 1/2 - 4 | 4 | 2A | 2.4969 | 2.4731 | 2.3345 | 2.3241 | 2.1992 |
| 2 3/4 - 4 | 4 | 2A | 2.7468 | 2.7230 | 2.5844 | 2.5739 | 2.4491 |
| 3 - 4 | 4 | 2A | 2.9968 | 2.9730 | 2.8344 | 2.8237 | 2.6991 |
| 3 1/4 - 4 | 4 | 2A | 3.2467 | 3.2229 | 3.0843 | 3.0734 | 2.9490 |
| 3 1/2 - 4 | 4 | 2A | 3.4967 | 3.4729 | 3.3343 | 3.3233 | 3.1990 |
| 3 3/4 - 4 | 4 | 2A | 3.7466 | 3.7228 | 3.5842 | 3.5730 | 3.4489 |
| 4 - 4 | 4 | 2A | 3.9966 | 3.9728 | 3.8342 | 3.8229 | 3.6989 |
- The source prints the size ladder in three column groups with repeated header blocks; the groups are merged here and repeated headers are not reproduced as data rows.
| Nominal Designation | TPI | Class | D — Major (min) | D2 — Pitch (max) | D2 (min) | D1 — Minor (max) | D1 (min) |
|---|---|---|---|---|---|---|---|
| #1 - 64 | 64 | 2B | 0.0730 | 0.0655 | 0.0629 | 0.0623 | 0.0561 |
| #2 - 56 | 56 | 2B | 0.0860 | 0.0772 | 0.0744 | 0.0737 | 0.667 |
| #3 - 48 | 48 | 2B | 0.0990 | 0.0855 | 0.0855 | 0.0845 | 0.0764 |
| #4 - 40 | 40 | 2B | 0.1120 | 0.0991 | 0.0958 | 0.0939 | 0.0849 |
| #5 - 40 | 40 | 2B | 0.1250 | 0.1121 | 0.1088 | 0.1062 | 0.0979 |
| #6 - 32 | 32 | 2B | 0.1380 | 0.1214 | 0.1177 | 0.1140 | 0.1040 |
| #8 - 32 | 32 | 2B | 0.1640 | 0.1475 | 0.1437 | 0.1390 | 0.1300 |
| #10 - 24 | 24 | 2B | 0.1900 | 0.1672 | 0.1629 | 0.1560 | 0.1450 |
| #12 - 24 | 24 | 2B | 0.2160 | 0.1933 | 0.1889 | 0.1810 | 0.1710 |
| 1/4 - 20 | 20 | 2B | 0.2500 | 0.2224 | 0.2175 | 0.2070 | 0.1960 |
| 5/16 - 18 | 18 | 2B | 0.3125 | 0.2817 | 0.2764 | 0.2650 | 0.2520 |
| 3/8 - 16 | 16 | 2B | 0.3750 | 0.3401 | 0.3344 | 0.3210 | 0.3070 |
| 7/16 - 14 | 14 | 2B | 0.4375 | 0.3972 | 0.3911 | 0.3760 | 0.3600 |
| 1/2 - 13 | 13 | 2B | 0.5000 | 0.4565 | 0.4500 | 0.4340 | 0.4170 |
| 9/16 - 12 | 12 | 2B | 0.5625 | 0.5125 | 0.5084 | 0.4900 | 0.4720 |
| 5/8 - 11 | 11 | 2B | 0.6250 | 0.5732 | 0.5660 | 0.5460 | 0.5270 |
| 3/4 - 10 | 10 | 2B | 0.7500 | 0.6927 | 0.6850 | 0.6630 | 0.6420 |
| 7/8 - 9 | 9 | 2B | 0.8750 | 0.8110 | 0.8028 | 0.7780 | 0.7550 |
| 1 - 8 | 8 | 2B | 1.0000 | 0.9276 | 0.9188 | 0.8900 | 0.8650 |
| 1 1/8 - 7 | 7 | 2B | 1.1250 | 1.0416 | 1.0322 | 0.9980 | 0.9700 |
| 1 1/4 - 7 | 7 | 2B | 1.2500 | 1.1668 | 1.1572 | 1.1230 | 1.0950 |
| 1 3/8 - 6 | 6 | 2B | 1.3750 | 1.2771 | 1.2667 | 1.2250 | 1.1950 |
| 1 1/2 - 6 | 6 | 2B | 1.5000 | 1.4075 | 1.3917 | 1.3500 | 1.3200 |
| 1 3/4 - 5 | 5 | 2B | 1.7500 | 1.6317 | 1.6201 | 1.5680 | 1.5340 |
| 2 - 4 1/2 | 4.5 | 2B | 2.0000 | 1.8681 | 1.8557 | 1.7950 | 1.7590 |
| 2 1/4 - 4 1/2 | 4.5 | 2B | 2.2500 | 2.1183 | 2.1057 | 2.0450 | 2.0090 |
| 2 1/2 - 4 | 4 | 2B | 2.5000 | 2.3511 | 2.3376 | 2.2670 | 2.2290 |
| 2 3/4 - 4 | 4 | 2B | 2.7500 | 2.6013 | 2.5876 | 2.5170 | 2.4790 |
| 3 - 4 | 4 | 2B | 3.0000 | 2.8515 | 2.8376 | 2.7670 | 2.7290 |
| 3 1/4 - 4 | 4 | 2B | 3.2500 | 3.1017 | 3.0876 | 3.0170 | 2.9790 |
| 3 1/2 - 4 | 4 | 2B | 3.5000 | 3.3519 | 3.3376 | 3.2670 | 3.2290 |
| 3 3/4 - 4 | 4 | 2B | 3.7500 | 3.6021 | 3.5876 | 3.5170 | 3.4790 |
| 4 - 4 | 4 | 2B | 4.0000 | 3.8523 | 3.8376 | 3.7670 | 3.7290 |
- Row 2 (#2 - 56): Source prints the #2-56 D1 min as "0.667" — an order-of-magnitude slip against the size ladder (the neighbouring #1-64 and #3-48 D1 min values are 0.0561 and 0.0764); reproduced as printed.
- The source prints the size ladder in repeated header blocks between column groups; the groups are merged here and repeated headers are not reproduced as data rows.
Materials
- Thread class, gaging and coating sequence specified per RFQ — plating grows the thread into the 2A allowance; state finish and class together at quotation
Ordering & documentation
Documents
Shipments of ASME B1.1 UNC Thread Limiting Dimensions — External 2A / Internal 2B (#1 – 4 in) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASME B1.1 UNC Thread Limiting Dimensions — External 2A / Internal 2B (#1 – 4 in) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ASME B1.1 UNC Thread Limiting Dimensions — External 2A / Internal 2B (#1 – 4 in)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for asme b1.1 unc thread limiting dimensions — external 2a / internal 2b (#1 – 4 in) is 10,000 pieces (applies to the standard sizes and finishes for asme b1.1 unc thread limiting dimensions — external 2a / internal 2b (#1 – 4 in); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for asme b1.1 unc thread limiting dimensions — external 2a / internal 2b (#1 – 4 in) run 3–7 days. Quantities or variants of asme b1.1 unc thread limiting dimensions — external 2a / internal 2b (#1 – 4 in) outside the standard range are confirmed at quotation.
Storage & shipping
ASME B1.1 UNC Thread Limiting Dimensions — External 2A / Internal 2B (#1 – 4 in) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store asme b1.1 unc thread limiting dimensions — external 2a / internal 2b (#1 – 4 in) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
How do I use the 2A/2B limiting dimensions in practice — what do the max/min values mean for inspection and for plating?
Each max/min pair is a gage envelope, not a target. A 2A bolt thread must measure at or under the major max and pitch max and at or above the minimums — in practice, verified with a GO/NOGO thread ring; the internal 2B values are the mirror image checked with a thread plug. The tolerance bands are asymmetric by design: the external thread sits below basic size and the internal above, and the gap between them is the allowance that guarantees a commercial bolt always enters a commercial nut — 2A/2B is the everyday pair of volume assembly. Two places the numbers bite in practice. Plating: coating applied after threading grows every diameter, which is exactly what the 2A allowance budgets for — a heavily plated thread still assembles; but if the part is plated before threading or re-gaged after heavy galvanizing, check against the table rather than assuming fit. Inspection economics: the limits let receiving inspection accept or reject on measurement instead of trial assembly — a bolt that gauges NOGO against the pitch limits is a nonconformance even if it winds in by hand. For 3A/3B tighter classes or UNEF limits beyond these charts, that is a per-RFQ line with the gaging plan named.
What is the MOQ and lead time for threaded parts on this standard?
The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common thread sizes on this standard are widely stocked; confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for ASME B1.1 UNC Thread Limiting Dimensions — External 2A / Internal 2B (#1 – 4 in)?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ASME B1.1 UNC Thread Limiting Dimensions — External 2A / Internal 2B (#1 – 4 in) state?
State the full designation (ASME B1.1), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ASME B1.1 UNC Thread Limiting Dimensions — External 2A / Internal 2B (#1 – 4 in) inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your ASME B1.1 UNC Thread Limiting Dimensions — External 2A / Internal 2B (#1 – 4 in)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support