ISO 7436 Slotted Set Screws, Cup Point

ISO 7436 slotted set screws with cup point d 1,4 to 6 (M3 – M10 length ladder) — the screwdriver-driven anti-rotation point, with the collected n/t rows and the trade-size length matrix.

Last updated: 2026-11

Request a Quote

ISO 7436 Slotted Set Screws, Cup Point in an industrial setting
Illustrative image redrawn from real ISO 7436 Slotted Set Screws, Cup Point product references — not a photograph of stocked items.

Specifications

The cup point is the bite of the set-screw world: a shallow ring edge that digs into the mating surface and resists rotation with far more grip than a flat point of the same size — the classic slotted choice for securing small gears, pulleys and settings rings against slip. The collected page gives the cup/slot geometry per diameter (the size run 1,4 / 2 / 2,5 / 3 / 5 / 6 is the source's own and skips d 4 — flagged verbatim) with slot width n (0,4 → 1,6) and slot depth t min. (0,8 → 2,4), then a length matrix by thread (M3 – M10, l 3 – 40) marked "+" where the source offers the length as a trade size. Thread labels on the matrix run M3 to M10 while the geometry columns are plain diameters — both carried as printed. Property class and finish are not tabulated — per RFQ.

Standard ISO 7436 — slotted set screws with cup point (driver-driven anti-slip point)
Size range d 1,4 / 2 / 2,5 / 3 / 5 / 6 geometry columns (d 4 skipped in the source, flagged); length matrix M3 – M10, l 3 – 40
Cup/slot geometry n (slot width) 0,4 → 1,6; t min. 0,8 → 2,4
Availability "+" trade-size marks per length/thread pair, the source's own marker kept verbatim
Flagged verbatim size run skips d 4; geometry columns print diameters while the length matrix prints thread labels
Material / class / finish Not tabulated by the collected specification — per RFQ
ISO 7436 slotted set screws with cup point - cup/slot attribute rows per size (d 1,4 - 6)All dimensions in millimetres. The source's first grid prints the size ladder 1,4 / 2 / 2,5 / 3 / 5 / 6 as column labels under the spanning label 'd z max.'; attribute rows: n = slot width, t min. = slot depth.
d z max.1,422,5356
n0,40,60,811,21,6
t min.0,81,121,281,622,4
ld
  • Row 1 (n): the source's size column run (1,4 / 2 / 2,5 / 3 / 5 / 6) skips d 4; no d4 column exists anywhere on the collected page - carried verbatim
ISO 7436 slotted set screws with cup point - length ladder by thread ('+' = trade size, l 3 - 40)All dimensions in millimetres. The source merges the length header ('l') and the thread-size header row into the grid; '+' marks the source's trade-size availability for that length/thread pair, blank = not offered by the source.
ld / M3M4M5M6M8M10
3+
4++
5++++
6++++
8+++++
10++++++
12++++++
14++++++
16++++++
18++++++
20++++++
22++++++
25++++++
28++++
30++++
35+++
40++

Materials

  • Property class and finish specified per RFQ — cup-point set screws commonly run case-hardened steel; state the mating shaft material and hardness (the cup ring bites harder stock deeper) and any stainless need at quotation

Ordering & documentation

Documents

Shipments of ISO 7436 Slotted Set Screws, Cup Point are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 7436 Slotted Set Screws, Cup Point orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 7436 Slotted Set Screws, Cup Point), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for iso 7436 slotted set screws, cup point is 10,000 pieces (applies to the standard sizes and finishes for iso 7436 slotted set screws, cup point; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 7436 slotted set screws, cup point run 3–7 days. Quantities or variants of iso 7436 slotted set screws, cup point outside the standard range are confirmed at quotation.

Storage & shipping

ISO 7436 Slotted Set Screws, Cup Point are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 7436 slotted set screws, cup point dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

The size ladder on this page skips d 4 — which size do I use there?

The collected ISO 7436 page genuinely has no d 4 column: its geometry run prints 1,4 / 2 / 2,5 / 3 / 5 / 6 (flagged verbatim rather than interpolated), so between the d 3 and d 5 geometry sets the practical route is to order by thread — the length matrix covers M3 to M10 and a d 4 nominal screw corresponds to the M4 column's envelope. Do not average the neighbour columns; cup depth and slot width step with the stock diameter. If your drawing calls a specific d 4 cup-point screw, confirm per RFQ and we will quote against the standard rather than this capture. Also note the two labelling systems on one page: geometry columns are plain diameters, the length matrix uses thread labels — match your drawing's convention when ordering. Class and finish per RFQ; the "+" marks in the matrix are the source's own trade-size availability, kept as printed.

What is the MOQ and lead time for ISO 7436 Slotted Set Screws, Cup Point?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 7436 Slotted Set Screws, Cup Point state?

State the full designation (ISO 7436), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 7436 Slotted Set Screws, Cup Point inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ISO 7436 Slotted Set Screws, Cup Point
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.