DIN 966 Cross Recessed Raised Countersunk Machine Screws
Cross recessed raised countersunk head machine screws per DIN 966 — current norm DIN EN ISO 7047 — M1.6 to M10 in steel class 4.8 or A2/A4 stainless, thread 6g. The oval head with a centred driver: flush seat, crowned finish, production-line drive.
Last updated: 2026-11
Specifications
DIN 966 completes the raised-countersunk pair: the same crowned-over-countersink head as DIN 964, with the cross recess of DIN 965 in place of the slot. The collected standard table runs M1.6 through M10 in steel class 4.8 or A2/A4 stainless, thread tolerance 6g. At M4 the head seats at 7.5 mm maximum diameter (7.14 mm minimum), the raised face rises approximately 1 mm, and a No. 2 cross recess — Type H depth ≈4.5 mm, Type Z 4.6 mm — takes a Phillips driver with full centring; the minimum thread length is 22 mm. DIN 966's current norm is DIN EN ISO 7047. Choose it where the oval-head finish meets powered assembly — enclosure lids, instrument panels, switchgear faceplates — and the slotted version (DIN 964) is the choice where a flat blade remains the service tool.
| Standard | DIN 966 — cross recessed raised countersunk head screw; current norm DIN EN ISO 7047 |
|---|---|
| Size range | M1.6 – M10 |
| Dimensions at M4 | dk (head diameter) nominal=max 7.5 mm (min 7.14 mm); k (head height) max 2.2 mm; f (raised face) approx 1 mm; cross recess No. 2, Type H m ≈4.5 mm / Type Z 4.6 mm; b min 22 mm; P 0.7 mm |
| Dimensions at M5 | dk nominal=max 9.2 mm (min 8.84 mm); k max 2.5 mm; f approx 1.25 mm; cross recess No. 2; b min 25 mm |
| Strength / materials | Steel 4.8; stainless A2, A4 |
| Thread | 6g |
| dk at M4 | nominal=max 7,5 (min 7,14) |
| k at M4 | max 2,2 |
| f at M4 | approx 1 |
| Dimensions at M4 | cross recess no |
Materials
- Steel
- Stainless steel
Ordering & documentation
Documents
Shipments of DIN 966 Cross Recessed Raised Countersunk Machine Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 966 Cross Recessed Raised Countersunk Machine Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 966 Cross Recessed Raised Countersunk Machine Screws), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for din 966 cross recessed raised countersunk machine screws is 10,000 pieces (applies to the standard sizes and finishes for din 966 cross recessed raised countersunk machine screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 966 cross recessed raised countersunk machine screws run 3–7 days. Quantities or variants of din 966 cross recessed raised countersunk machine screws outside the standard range are confirmed at quotation.
Storage & shipping
DIN 966 Cross Recessed Raised Countersunk Machine Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 966 cross recessed raised countersunk machine screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
DIN 966 or DIN 964 — the same oval head, so which one do I order?
Decide by the driver, not the head. The two standards describe the same raised countersunk geometry over overlapping ranges, and the collected tables agree on the M4 figures: 7.5 mm head diameter, roughly 1 mm of raised face. DIN 966's cross recess centrs a Phillips driver and stands up to powered assembly; DIN 964's slot is the serviceable-with-anything choice for instruments and equipment maintained by hand. If your drawings say one, ordering the other invites the wrong driver at the bench — keep the designation and state it on the RFQ.
What is the MOQ and lead time for these machine screws?
Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for these machine screws state?
State the standard designation (for example DIN 965, DIN 964, DIN 966 — or the ISO designation your drawing prints, such as ISO 7046, ISO 2010 or ISO 7047), thread size and pitch, length and head dimension, strength class or material (such as 4.8, A2-70, A4-80 or brass), finish (black oxide, zinc plated, or plain), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 966 Cross Recessed Raised Countersunk Machine Screws inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your DIN 966 Cross Recessed Raised Countersunk Machine Screws
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support