ASME B18.6.3 Slotted Hex Head Machine Screws (Inch Series)

Slotted hex head machine screws to ASME B18.6.3, inch series #4–3/8 — the machine-screw body with a hex head you can also drive from the slot, with the collected per-size table: width across flats, head height, slot width and depth at max/min.

Last updated: 2026-11

Request a Quote

ASME B18.6.3 Slotted Hex Head Machine Screws (Inch Series) in an industrial setting
Illustrative image redrawn from real ASME B18.6.3 Slotted Hex Head Machine Screws (Inch Series) product references — not a photograph of stocked items.

Specifications

The slotted hex head machine screw combines two drives on one head: a hex formed on the head flanks for wrench or nut-driver work, and a slot across the top for a conventional screwdriver where access allows only a blade. That redundancy is the reason to specify it over a plain hex head (no driver when the wrench is out of reach) or a plain slotted head (no torque when the slot is chewed or painted over) — the pattern survives field maintenance better than either single-drive option. The collected table runs #4 through 3/8 and carries, per size, the width across flats A with max/min (0.187/0.181 at #4 rising to 0.562/0.551 at 3/8), head height H, slot width J and slot depth T, all max/min — the four figures that decide wrench fit, head clearance and whether the slot still takes a driver after finishing. Threads run both UNC and UNF at every size — the source prints the pitch pair as one compound cell per size (for example 48 UNF / 40 UNC at #4), so the same head geometry serves either series; name the series on the order. This is the first hex-head pattern in the site's B18.6.3 machine-screw coverage — the round, pan, fillister and truss patterns are on their own pages.

Pattern Machine screw with slotted hex head to ASME B18.6.3 — dual drive: hex across flats for wrench/nut-driver, slot for blade driver
Size range #4 through 3/8, seven sizes in the collected ladder; each size available in UNC and UNF (pitch pairs tabulated per size, e.g. 48 UNF / 40 UNC at #4)
Tabulated geometry Per size: width across flats A (max/min), head height H (max/min), slot width J (max/min), slot depth T (max/min) — e.g. 1/4: A 0.375/0.367, H 0.190/0.172, J 0.075/0.064, T 0.101/0.083
Threads / finishes / lengths UNC and UNF both tabulated; finishes and length ranges are not tabulated by the collected source — per RFQ (state thread series, length and finish with the order)
ASME B18.6.3 slotted hex head machine screws — head and slot geometry, #4–3/8 (inch)All dimensions in inches. The source prints the UNC/UNF thread pitch pair as one compound cell ("48 UNF / 40 UNC") — reproduced verbatim; read each pair as UNF TPI / UNC TPI. A = width across flats (max/min), H = head height (max/min), J = slot width (max/min), T = slot depth (max/min). Property classes, finishes and length ranges are not tabulated by the source — per RFQ.
Nominal SizeThread Pitches (UNF / UNC)Width Across Flats (A) MaxA MinHead Height (H) MaxH MinSlot Width (J) MaxJ MinSlot Depth (T) MaxT Min
#4 · 0.112 in48 UNF / 40 UNC0.1870.1810.0600.0490.0390.0310.0360.023
#6 · 0.138 in40 UNF / 32 UNC0.2500.2440.0930.0800.0480.0390.0460.033
#8 · 0.164 in36 UNF / 32 UNC0.2500.2440.1100.0960.0540.0450.0660.052
#10 · 0.190 in32 UNF / 24 UNC0.3120.3050.1200.1050.0600.0500.0720.057
1/4 in28 UNF / 20 UNC0.3750.3670.1900.1720.0750.0640.1010.083
5/16 in24 UNF / 18 UNC0.5000.4890.2300.2080.0840.0720.1220.100
3/8 in24 UNF / 16 UNC0.5620.5510.2950.2700.0940.0810.1560.131

Materials

  • Material and finish specified per RFQ — steel with zinc or black oxide are the common stock finishes for this pattern; name the environment and any tooling constraints (nut-driver sizes on hand) with the order

Ordering & documentation

Documents

Shipments of ASME B18.6.3 Slotted Hex Head Machine Screws (Inch Series) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASME B18.6.3 Slotted Hex Head Machine Screws (Inch Series) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASME B18.6.3 Slotted Hex Head Machine Screws (Inch Series)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for asme b18.6.3 slotted hex head machine screws (inch series) is 10,000 pieces (applies to the standard sizes and finishes for asme b18.6.3 slotted hex head machine screws (inch series); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for asme b18.6.3 slotted hex head machine screws (inch series) run 3–7 days. Quantities or variants of asme b18.6.3 slotted hex head machine screws (inch series) outside the standard range are confirmed at quotation.

Storage & shipping

ASME B18.6.3 Slotted Hex Head Machine Screws (Inch Series) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store asme b18.6.3 slotted hex head machine screws (inch series) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When is a slotted hex head the right machine-screw pattern?

Specify it when the assembly will be maintained by people and tooling you cannot control. The pattern's value is drive redundancy: the hex takes a nut driver or wrench for assembly torque (the flats at 1/4 size are 0.375/0.367 — a 3/8 nut driver), while the slot keeps a flat-blade screwdriver usable when the hex corners round off or the head is painted over — the common failure that strands a plain hex-head screw in the field. It earns its place on equipment enclosures, terminal covers, jigs and fixtures — anywhere a stripped drive means machining or drilling the head off. Compare against your other options honestly: for production assembly with controlled torque, a plain hex or a socket head drives faster; for corrosive or painted-over environments, the slot is the fallback that keeps the screw removable. The slot dimensions matter for that fallback — at 1/4 the slot is 0.075/0.064 wide and 0.101/0.083 deep, enough for a driver blade that will not cam out under a painted-in head — and the collected table gives those figures at max/min for all seven sizes so the mating blade can be checked, not guessed.

What is the MOQ and lead time for these screws?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in these designations are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for ASME B18.6.3 Slotted Hex Head Machine Screws (Inch Series)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ASME B18.6.3 Slotted Hex Head Machine Screws (Inch Series) state?

State the full designation (ASME B18.6.3 Slotted Hex Head Machine Screws (Inch Series)), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASME B18.6.3 Slotted Hex Head Machine Screws (Inch Series) inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ASME B18.6.3 Slotted Hex Head Machine Screws (Inch Series)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.