TEKS/3 Self-Drilling Screws (Medium Gauge Metals Point Class)

Inch TEK self-drilling screws, TEKS/3 point class as tabulated for medium gauge metals: screw sizes No. 8 to 1/4" drilling .100"–.250" depending on diameter, with drill-point lengths .203"–.312". The standard class for framing-weight sheet steel.

Last updated: 2026-11

Request a Quote

TEKS/3 Self-Drilling Screws (Medium Gauge Metals Point Class) in an industrial setting
Illustrative image redrawn from real TEKS/3 Self-Drilling Screws (Medium Gauge Metals Point Class) product references — not a photograph of stocked items.

Specifications

TEKS/3 is the workhorse point class of the inch TEK ladder — the class for medium gauge metals once the stack leaves the thin-sheet windows of TEKS/2. The collected selection table tabulates four sizes: No. 8 drilling .100–.140", No. 10 .110–.175", No. 12 .110–.210" and 1/4" the heaviest window of the class at .110–.250". Drill-point lengths step up accordingly, .203" at No. 8 to .312" at 1/4", because the flute must clear the thicker cut before the thread takes hold. Overlapping windows are deliberate: the same stack often sits inside two neighbouring classes (a .120" total is TEKS/3 at No. 8 and still inside the TEKS/2 1/4" window), and the choice then follows the screw diameter the joint needs, not the point number alone. Beyond .250" the ladder hands over to the heavier classes — see TEKS/4 and the Special TEKS/2 variant pages. The collected table carries no head-form, thread-pitch or length columns; those are fixed at quotation with the panel system.

Point class TEKS/3 — medium gauge metals point class, as printed by the collected selection table
Screw sizes (tabulated) No. 8, No. 10, No. 12, 1/4"
Material thickness range per size No. 8 .100–.140" · No. 10 .110–.175" · No. 12 .110–.210" · 1/4" .110–.250"
Drill-point length per size No. 8 .203" · No. 10 .250" · No. 12 .281" · 1/4" .312" (inches + decimal as printed)
Drilling window (class) .100" to .250" total metal thickness, size-dependent — see the per-size ladder
Materials Case-hardened carbon steel with corrosion-resistant plating is the standard construction for inch TEK self-drillers; stainless (410) and other finishes confirmed at quotation
TEKS/3 self-drilling screws - medium gauge metals point-selection ladder (No. 8 - 1/4")All values as printed by the collected point-selection table. "Recommended material thickness" is the total metal thickness the point drills at that screw diameter. Drill-point length is printed as a fraction with its decimal equivalent.
Screw diameterRecommended material thickness (inches)Drill-point length — inchesDrill-point length — decimal
No. 8.100 To .14013/64.203
No. 10.110 To .1751/4.250
No. 12.110 To .2109/32.281
1/4".110 To .2505/16.312

Materials

  • Case-hardened carbon steel with corrosion-resistant plating is the standard construction for inch TEK self-drillers; stainless (410) and other finishes confirmed at quotation

Ordering & documentation

Documents

Shipments of TEKS/3 Self-Drilling Screws (Medium Gauge Metals Point Class) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for TEKS/3 Self-Drilling Screws (Medium Gauge Metals Point Class) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (TEKS/3 Self-Drilling Screws (Medium Gauge Metals Point Class)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for teks/3 self-drilling screws (medium gauge metals point class) is 10,000 pieces (applies to the standard sizes and finishes for teks/3 self-drilling screws (medium gauge metals point class); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for teks/3 self-drilling screws (medium gauge metals point class) run 3–7 days. Quantities or variants of teks/3 self-drilling screws (medium gauge metals point class) outside the standard range are confirmed at quotation.

Storage & shipping

TEKS/3 Self-Drilling Screws (Medium Gauge Metals Point Class) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store teks/3 self-drilling screws (medium gauge metals point class) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why choose TEKS/3 over the other TEK point numbers?

By total steel thickness. The collected selection table assigns the middle of the ladder: No. 8 drills .100–.140", No. 10 .110–.175", No. 12 .110–.210" and 1/4" .110–.250": the point must pierce the whole stack in one operation, so a point class below the total thickness stalls or snaps its tip, and a class far above it leaves an unnecessarily long drill flute that wastes engagement. Match the printed material-thickness range for your screw diameter to the measured stack, and step up to the next TEK number when the stack exceeds it. State the total thickness on the RFQ so the point class is confirmed against the ladder rather than assumed.

My stack sits in both a TEKS/2 and a TEKS/3 window — which one?

Fix the screw diameter first, then the point. The windows overlap across classes: a .120" total, for example, is inside the No. 10 TEKS/3 window (.110–.175") and also inside the 1/4" TEKS/2 window (.035–.175"). If the joint calls for a No. 10, take the TEKS/3 point; if it genuinely needs a 1/4" screw, the TEKS/2 point covers the same stack with the larger diameter. What never works is keeping a small diameter and stretching its window — a No. 8 TEKS/2 stops at .100".

What is the MOQ and lead time for these self-drilling screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for inch TEK screws state?

State the screw gauge (No. 6, No. 8, No. 10, No. 12, 1/4"), the TEK point number required for the total metal thickness being drilled, head form and drive, length, finish (for example zinc plated or 410 stainless), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your TEKS/3 Self-Drilling Screws (Medium Gauge Metals Point Class) inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your TEKS/3 Self-Drilling Screws (Medium Gauge Metals Point Class)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.