TX08 6-Lobe Pin TX Pan Head Self Drill Security Screws

Pan head self-drilling security screws on the 6-lobe pin TX drive, No.8–No.14 as tabulated (4-40, 8-32 and No.6 marked CALL in the source and not tabulated): head diameters 7.9–12.3 mm, head heights 3.0–4.2 mm, tool sizes TX20–TX30.

Last updated: 2026-11

Request a Quote

TX08 6-Lobe Pin TX Pan Head Self Drill Security Screws in an industrial setting
Illustrative image redrawn from real TX08 6-Lobe Pin TX Pan Head Self Drill Security Screws product references — not a photograph of stocked items.

Specifications

TX08 is the pan-head take on the self-drilling pin-TX screw: the same drill-and-tap-in-one-pass point and the same pin-blocked six-lobe drive as TX07, but with a low dome head that needs no countersinking — the faster seating choice on thin sheet where a flush finish is not required. The collected tabulation covers No.8 through No.14 cleanly (head diameters 7.9, 9.3, 10.5 and 12.3 mm; head heights 3.0, 3.2, 3.9 and 4.2 mm; tool sizes TX20, TX25, TX27 and TX30); the source marks the 4-40, 8-32 and No.6 columns CALL, so those are not tabulated here. The design is classed for medium-torque applications with medium security against vandals and thieves at relatively low cost, and like the whole line it pairs with pin-TX barrel nuts, wave nuts, shear nuts, Kinmar nuts or four-hole nuts where the assembly needs a second layer of security. The collected availability matrix carries no legible markings, so lengths are confirmed at quotation.

Designation TX08 — pan head self-drilling security screw, 6-lobe pin TX drive; low dome head, no countersink required
Gauge range (tabulated) No.8, No.10, No.12, No.14 — the 4-40, 8-32 and No.6 columns are marked CALL in the collected table and are not tabulated here
Head diameter dk per gauge (mm) No.8 7.9 · No.10 9.3 · No.12 10.5 · No.14 12.3
Head height k per gauge (mm) No.8 3.0 · No.10 3.2 · No.12 3.9 · No.14 4.2
Tool size per gauge No.8 TX20 · No.10 TX25 · No.12 TX27 · No.14 TX30
Length availability No legible markings in the collected availability matrix — confirmed at quotation
Torque class (source-stated) Medium torque applications; medium security resistance
Security principle Pin-TX drive — special driver required for installation and removal
TX08 pan head self-drilling security screws - imperial gauge head dimensionsValues as printed in the collected imperial head-dimension table. Length availability is not tabulated: the source availability matrix marks cells only with image icons carrying no decodable text legend, so length and finish combinations are confirmed at quotation. The source also tabulates 4-40, 8-32 and No.6 columns marked CALL in every cell — not rendered here.
Thread gaugeHead diameter dk (mm)Head height k (mm)Tool size
No.87.93.0TX20
No.109.33.2TX25
No.1210.53.9TX27
No.1412.34.2TX30

Materials

  • Confirmed at quotation (collected page states no standard material line)

Ordering & documentation

Documents

Shipments of TX08 6-Lobe Pin TX Pan Head Self Drill Security Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for TX08 6-Lobe Pin TX Pan Head Self Drill Security Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (TX08 6-Lobe Pin TX Pan Head Self Drill Security Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for tx08 6-lobe pin tx pan head self drill security screws is 10,000 pieces (applies to the standard sizes and finishes for tx08 6-lobe pin tx pan head self drill security screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for tx08 6-lobe pin tx pan head self drill security screws run 3–7 days. Quantities or variants of tx08 6-lobe pin tx pan head self drill security screws outside the standard range are confirmed at quotation.

Storage & shipping

TX08 6-Lobe Pin TX Pan Head Self Drill Security Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store tx08 6-lobe pin tx pan head self drill security screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Pan or countersunk self-driller — how do I choose?

By the hole you are willing to prepare and the profile you can accept. TX08 drives straight into a flat face — no countersink cut, faster on long panel runs — but the dome stands proud by the tabulated head height (3.0 mm at No.8, 4.2 mm at No.14). TX07 seats flush but needs the countersink machined or punched into the panel. On painted architectural panels where flushness matters, TX07; on ducting, trays and internal frames where speed wins, TX08.

Can I get machine-thread sizes like 4-40 or 8-32?

The collected table lists 4-40 and 8-32 columns but marks them CALL, together with No.6 — the source publishes no dimensions for them. This page tabulates only the clean sheet-gauge columns No.8 through No.14. If a machine-thread security self-driller is genuinely needed, that is a quotation enquiry, not something to order off this page.

What is the MOQ and lead time for these security screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; sizes quoted as available to order, and non-standard sizes or materials, are quoted with a confirmed schedule. Confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these security screws state?

State the designation code (TX01 through TX20) and head style, the drive (6-lobe pin TX — the matching pin-TX driver or bit is required), nominal thread size and length, material and finish, the substrate or mating nut where relevant, required certificates, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your TX08 6-Lobe Pin TX Pan Head Self Drill Security Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your TX08 6-Lobe Pin TX Pan Head Self Drill Security Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.