ISO 14587 Hexalobular Raised Countersunk Tapping Screws

ISO 14587 hexalobular socket raised countersunk (oval) head tapping screws — ST2,9 to ST6,3, the six-lobe drive on an oval countersunk head for sheet-metal threads, with the collected a/dk/f/k/y rows.

Last updated: 2026-11

Request a Quote

ISO 14587 Hexalobular Raised Countersunk Tapping Screws in an industrial setting
Illustrative image redrawn from real ISO 14587 Hexalobular Raised Countersunk Tapping Screws product references — not a photograph of stocked items.

Specifications

ISO 14587 carries the hexalobular drive into the self-tapping world: an oval (raised countersunk) head on a tapping-screw thread that cuts its own mating thread in sheet metal, plastic or thin-walled profiles. The tabulated data covers ST2,9 through ST6,3 with four geometry rows — shank run-out a, head diameter dk max, raised-face height f, head height k max — and the y row (thread-forming end length, Type C), which is the depth of the pointed, fluted entry that does the cutting. The oval head is the point of the series: it sits flush-ish like a countersunk screw but its crowned top leaves a rounded profile with no sharp edge, and it still leaves room for a deep six-lobe socket, so thin-sheet assemblies get torque-proof driving without a proud hex head. The tabulated data has clear limits — the hexalobular size/A/t rows and any length ladder are absent (flagged on the table), so drive tooling and lengths go per RFQ. Pair with the ST thread-chart page in this catalog for the tapped-hole side. Material, case hardness and finish are not tabulated — per RFQ (case-hardened steel is the norm for cutting its own thread; confirm at quotation).

Standard ISO 14587 — hexalobular socket raised countersunk (oval) head tapping screws
Size range ST2,9 / ST3,5 / ST4,2 / ST4,8 / ST5,5 / ST6,3
Head diameter dk max: 6,3 (ST2,9) → 12,6 (ST6,3) mm
Head height / face k max 1,7 → 3,15 mm; f 0,7 → 1,4 mm (the oval crown)
Thread-forming end y, Type C: 2,6 (ST2,9) → 6 (ST6,3) mm
Drive Hexalobular socket — size/A/t rows absent from the collected source, per RFQ
Material / hardness / finish Not tabulated by the collected specification — per RFQ
ISO 14587 hexalobular raised countersunk (oval) head tapping screws - geometry, ST2,9 - ST6,3All dimensions in millimetres. The collected source table carries the a, dk max, f, k max and y (thread-forming end, Type C) rows only; the hexalobular size/A/t rows and the length ladder are not present in the collected capture — per RFQ.
threadST2,9ST3,5ST4,2ST4,8ST5,5ST6,3
a1,11,31,41,61,81,8
dk max.6,38,29,410,411,512,6
f0,70,811,21,31,4
k max.1,72,352,62,833,15
y - TYPE C2,63,23,74,356
  • Row 1 (a): Collected table is truncated against the standard's full sheet: no hexalobular size/A/t rows and no length/weight ladder in the source capture. Geometry rows above carried verbatim.

Materials

  • Material and hardness specified per RFQ — tapping screws are normally case-hardened steel (surface ≥450 HV class per convention) or stainless; state the sheet thickness and substrate at quotation

Ordering & documentation

Documents

Shipments of ISO 14587 Hexalobular Raised Countersunk Tapping Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 14587 Hexalobular Raised Countersunk Tapping Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 14587 Hexalobular Raised Countersunk Tapping Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for iso 14587 hexalobular raised countersunk tapping screws is 10,000 pieces (applies to the standard sizes and finishes for iso 14587 hexalobular raised countersunk tapping screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 14587 hexalobular raised countersunk tapping screws run 3–7 days. Quantities or variants of iso 14587 hexalobular raised countersunk tapping screws outside the standard range are confirmed at quotation.

Storage & shipping

ISO 14587 Hexalobular Raised Countersunk Tapping Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 14587 hexalobular raised countersunk tapping screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

What does the y dimension tell me before I drive the screw?

It is the length of the business end. The y row (Type C) is the thread-forming tip — the tapered, fluted portion that actually cuts or forms the first threads in the sheet. It matters at two moments: when the screw finds the hole (a longer y self-centres more forgivingly) and when thin sheet is close to the head (the formed thread must clear the y zone before the full thread engages, or the joint strips). The tabulated ladder runs y from 2,6 mm at ST2,9 to 6 mm at ST6,3 — it scales with the thread, not the sheet. Your sheet thickness and pilot-hole choice decide the rest, and the ST thread chart in this catalog carries the mating hole side. Drive sizes, lengths, case hardness and coating are not tabulated (flagged verbatim on the table), so those all go on the RFQ rather than being guessed from a neighbouring series.

What is the MOQ and lead time for ISO 14587 Hexalobular Raised Countersunk Tapping Screws?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 14587 Hexalobular Raised Countersunk Tapping Screws state?

State the full designation (ISO 14587), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 14587 Hexalobular Raised Countersunk Tapping Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ISO 14587 Hexalobular Raised Countersunk Tapping Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.