ASME B18.6.3 Combination Slotted & Square Recessed Truss Head Machine Screws

Combination slotted and square recessed (Type III) truss head machine screws per ASME B18.6.3, #2 through 3/8 basic diameter in steel or stainless steel. The wide, shallow dome with two drives — maximum bearing on thin or soft sheet.

Last updated: 2026-11

Request a Quote

ASME B18.6.3 Combination Slotted & Square Recessed Truss Head Machine Screws in an industrial setting
Illustrative image redrawn from real ASME B18.6.3 Combination Slotted & Square Recessed Truss Head Machine Screws product references — not a photograph of stocked items.

Specifications

The truss head is the wide-load spreader of the machine screw family: a shallow dome about a fifth again wider than a pan head at the same gauge, sitting on a large bearing circle that spreads clamp load over thin sheet, plastics and soft gasketed joints. The collected ASME B18.6.3 table covers #2 (0.194 in maximum head diameter) through 3/8 (0.823 in) — the widest size span in this square recess batch — with full maximum and minimum columns and both drives in the head: a slot plus a Type III square recess. At #10 the head measures 0.448 in maximum diameter by 0.128 in maximum height, against 0.373 by 0.137 in for the pan head: more bearing, less height, which is exactly the trade soft-sheet joints want. The same collected notes apply as on the combination pan head: minimum slot depths run about 10% below slotted heads due to combination recess underfill, and the tapered square recess means penetration gaging depth is specified for finished plated product.

Standard ASME B18.6.3 — combination slotted and square recessed (Type III) truss head machine screws
Size range #2 (0.194 in) – 3/8 (0.823 in) maximum head diameter, basic screw diameter #2 – 3/8
Dimensions at #4 A (head diameter) max 0.257 in / min 0.241 in; H (head height) max 0.069 in / min 0.059 in; M (recess square) 0.070 in; recess depth 0.066 in; penetration gaging depth max 0.038 / min 0.028
Dimensions at #10 A max 0.448 in / min 0.425 in; H max 0.128 in / min 0.113 in; M 0.112 in; recess depth 0.115 in; penetration gaging depth max 0.075 / min 0.060
Dimensions at 3/8 A max 0.823 in / min 0.787 in; H max 0.215 in / min 0.191 in; M 0.191 in; recess depth 0.194 in; penetration gaging depth max 0.100 / min 0.085
Combination drive note Minimum slot depths approximately 10% lower than slotted heads (combination recess underfill, per collected table notes); square recess walls slightly tapered; penetration gaging applies to finished plated product
Materials Steel, stainless steel — grade and finish confirmed at quotation (tenant supply range)

Materials

  • Steel
  • Stainless steel

Ordering & documentation

Documents

Shipments of ASME B18.6.3 Combination Slotted & Square Recessed Truss Head Machine Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASME B18.6.3 Combination Slotted & Square Recessed Truss Head Machine Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASME B18.6.3 Combination Slotted & Square Recessed Truss Head Machine Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for asme b18.6.3 combination slotted & square recessed truss head machine screws is 10,000 pieces (applies to the standard sizes and finishes for asme b18.6.3 combination slotted & square recessed truss head machine screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for asme b18.6.3 combination slotted & square recessed truss head machine screws run 3–7 days. Quantities or variants of asme b18.6.3 combination slotted & square recessed truss head machine screws outside the standard range are confirmed at quotation.

Storage & shipping

ASME B18.6.3 Combination Slotted & Square Recessed Truss Head Machine Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store asme b18.6.3 combination slotted & square recessed truss head machine screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Truss head or pan head — how do I choose between the two domes?

Compare the collected tables at the same gauge: #10 measures 0.448 in across by 0.128 in high as a truss head against 0.373 by 0.137 in as a pan head. The truss trades head height for bearing circle — the wide, shallow dome spreads load on thin sheet, plastics and gasketed joints where a pan head would dig or pull through. Where the joint is solid and clearance is tight, the taller narrower pan head is the ordinary choice. Both heads on these two pages carry the same combination drive, so the head decision is purely about the joint surface.

Can this truss head replace a slotted truss head in an existing assembly?

The head envelope matches the slotted truss line, but the combination recess changes one dimension the seating sees: minimum slot depth runs about 10% below the slotted head because the square recess takes up head material (stated in the collected table notes). If the existing assembly relies on the slot as its only drive, the shallower slot still serves a flat blade for low-torque service; confirm the drive tooling used on the line and state both drives when ordering if field serviceability matters.

What is the MOQ and lead time for these square recess machine screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock sizes, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these square recess machine screws state?

State the standard designation (ASME B18.6.3 — often still called ANSI B18.6.3) and drive type (square recessed; combination slotted + square recessed where both drives are wanted), nominal screw size and thread series with threads per inch, length and head style, material and grade (steel or stainless; state the stainless grade such as 18-8/A2 or 316/A4 if specified), finish (plain, zinc plated, or other), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASME B18.6.3 Combination Slotted & Square Recessed Truss Head Machine Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ASME B18.6.3 Combination Slotted & Square Recessed Truss Head Machine Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.