TX11 5-Lobe Pin TX CSK Self Tapping Security Screws

Countersunk head 5-lobe pin TX self-tapping security screws, No.6–No.12 as tabulated (3.5–5.5 mm nominal): head diameters 6.6–10.6 mm, head heights 2.1–3.4 mm. Material-coded imperial availability matrix from 1/2″ to 3″; A2 and A4-70 stainless steel, zinc-plated steel on request.

Last updated: 2026-11

Request a Quote

TX11 5-Lobe Pin TX CSK Self Tapping Security Screws in an industrial setting
Illustrative image redrawn from real TX11 5-Lobe Pin TX CSK Self Tapping Security Screws product references — not a photograph of stocked items.

Specifications

TX11 is the flush member of the 5-lobe self-tapping pair: a countersunk head that seats into a prepared 90° countersink, a thread-cutting point for sheet and plastic, and the five-lobe plus centre pin drive that the collected page describes as an upgrade from its 6-lobe predecessor precisely because the design is less readily available — fewer circulating bits, higher practical security, same reusable two-way behaviour. The collected tabulation covers No.6 to No.12 (nominal 3.5 to 5.5 mm) with head diameters 6.6–10.6 mm and head heights 2.1–3.4 mm; the page prose claims No.6 to No.14, but the table stops at No.12, so the table governs here and No.14 is a quotation question, not a tabulated size. Supply is stated in A2 and A4-70 stainless steel, zinc-plated steel on request, with A4-70 again noted for medical-equipment security work. The availability matrix is imperial and material-coded: No.6 and No.8 mark from 1/2″ through 2″ with gaps, No.10 marks the same span continuously from 3/4″ up, and No.12 is the long-reach option — marked from 5/8″ through 3″, with the 2″–3″ tail in A4-70. Countersunk plus restricted-bit is the combination specified on public-facing timber-composite and sheet assemblies where a proud head would be noticed before it is tampered with.

Designation TX11 — countersunk (CSK) head self-tapping security screw, 5-lobe pin TX drive; seats flush in a 90° countersink, thread-cutting point, matched restricted insert bit
Gauge range (tabulated) No.6, No.8, No.10, No.12 (nominal 3.5–5.5 mm); collected prose claims to No.14 but the table stops at No.12 — No.14 is a quotation item
Head diameter dk per gauge (mm) No.6 6.6 · No.8 7.9 · No.10 9.3 · No.12 10.6
Head height k per gauge (mm) No.6 2.1 · No.8 2.5 · No.10 3.0 · No.12 3.4
Tool size (collected) F15-B (No.6) · F20-B (No.8) · F25-B (No.10, No.12)
Length availability (as marked) No.6 1/2″–1 1/2″ (skips 5/8″, 1 1/4″) · No.8/No.10 1/2″–2″ (No.10 continuous from 3/4″) · No.12 5/8″–3″, 2″–3″ A4-70 marker only; unmarked pairs confirmed at quotation — Availability matrix legend (as collected): stainless-triangle marker = A2 stainless steel; black-triangle marker = A4-70 stainless steel
Security principle Reusable two-way fixing; upgraded from 6-lobe pin TX as the design is less readily available; higher-torque capable per the collected page

Materials

  • A2 stainless steel
  • A4-70 stainless steel
  • Steel, zinc plated (on request)

Ordering & documentation

Documents

Shipments of TX11 5-Lobe Pin TX CSK Self Tapping Security Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for TX11 5-Lobe Pin TX CSK Self Tapping Security Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (TX11 5-Lobe Pin TX CSK Self Tapping Security Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for tx11 5-lobe pin tx csk self tapping security screws is 10,000 pieces (applies to the standard sizes and finishes for tx11 5-lobe pin tx csk self tapping security screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for tx11 5-lobe pin tx csk self tapping security screws run 3–7 days. Quantities or variants of tx11 5-lobe pin tx csk self tapping security screws outside the standard range are confirmed at quotation.

Storage & shipping

TX11 5-Lobe Pin TX CSK Self Tapping Security Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store tx11 5-lobe pin tx csk self tapping security screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

TX10 or TX11 for a sheet-metal enclosure door?

Surface decides. TX11 seats flush — the choice where a sliding element crosses the head, where clothing or hands pass over, or where the fixing should read as ordinary hardware. TX10 keeps the button dome, which tolerates thin sheet that cannot take a countersink and carries a slightly larger bearing circle. Both run the same 5-lobe pin drive, the same restricted bits and the same reusable two-way behaviour, so the head style is the only decision.

Can I get the No.14 gauge the source prose mentions?

Not from the tabulated line: the collected dimension table stops at No.12, and only a prose sentence claims No.6–No.14. This page publishes the table. If a No.14 gauge is designed in, raise it as a quotation line — the collected page states specials can be made to order subject to minimum order — but do not write No.14 into a drawing on the strength of that sentence alone.

What is the MOQ and lead time for these security screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; unmarked matrix pairs, zinc-plated steel on request, and specials made to order are quoted with a confirmed schedule. Confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these security screws state?

State the designation code and head style, the drive (5-lobe pin TX or 7-lobe pin — matched restricted insert bits required), thread or tapping size and length, the material marker you expect (A2 or A4-70 stainless; zinc-plated steel on request), the substrate or mating part, required certificates, and quantity per size — plus destination country. If you are matching existing fixings, name the drive generation explicitly: 5-lobe, 6-lobe and 7-lobe pin bits are not interchangeable.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your TX11 5-Lobe Pin TX CSK Self Tapping Security Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your TX11 5-Lobe Pin TX CSK Self Tapping Security Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.