AS/NZS 2465 Hexagon Screws (UNC and UNF Threads)
AS/NZS 2465-1999 (R2016) hexagon head screws on UNC and UNF threads, 7/16 through 2-1/4 in: threads per inch, across flats and corners, head height — the Australasian inch-series hex screw ladder.
Last updated: 2026-11
Specifications
AS/NZS 2465 is the Australia/New Zealand hexagon screw standard for the inch thread series, and the collected table runs 14 sizes from 7/16 to 2-1/4 inches. The thread rows are the identity: the UNC ladder at 20, 18, 16, 14, 13, 12, 11, 10, 9, 8, 7, 7, 6, 6 threads per inch — the coarse series stepping down as diameters grow. Head geometry follows the inch hex pattern: across flats s (7/16 nominal at the 7/16 screw through 2-1/4 with max/min behind it), across corners e max/min (0.505/0.488 at 7/16 to 2.598/2.480 at 2-1/4), and head height k in its fractional nominal/max/min ladder (5/32 through 1-5/16). Where an AS-built structure or imported machinery carries UNC/UNF hex screws, this is the governing designation; the UNF equivalents (the second thread count per diameter) ride the same head dimensions.
| Standard / scope | AS/NZS 2465-1999 (R2016) hexagon screws, UNC and UNF threads — 7/16 through 2-1/4 in, 14 sizes as tabulated |
|---|---|
| Threads (UNC ladder) | 20, 18, 16, 14, 13, 12, 11, 10, 9, 8, 7, 7, 6, 6 TPI across the size range; UNF counts on the second row as printed |
| Width across flats s | 7/16 (0.438/0.428) to 2-1/4 in (2.250/2.175) — nominal/max/min as printed |
| Width across corners e | Max/min: 0.505/0.488 (7/16) to 2.598/2.480 in (2-1/4) |
| Head height k | Nominal 5/32 (0.163/0.150) through 1-5/16 (0.974/0.902) max/min |
| Not tabulated | Lengths, grades/strength, finishes — per RFQ |
| Attribute | Sub-label | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PP | UNC | 20 | 18 | 16 | 14 | 13 | 12 | 11 | 10 | 9 | 8 | 7 | 7 | 6 | 6 |
| PP | 28 | 24 | 24 | 20 | 20 | 18 | 18 | 16 | 14 | 12 | 12 | 12 | 12 | 12 | |
| s | Nominal Size | 7/16 | 1/2 | 9/16 | 5/8 | 3/4 | 13/16 | 15/16 | 1-1/8 | 1-5/16 | 1-1/2 | 1-11/16 | 1-7/8 | 2-1/16 | 2-1/4 |
| s | 0.438 | 0.500 | 0.562 | 0.625 | 0.750 | 0.812 | 0.938 | 1.125 | 1.312 | 1.500 | 1.688 | 1.875 | 2.062 | 2.250 | |
| s | 0.428 | 0.489 | 0.551 | 0.612 | 0.736 | 0.798 | 0.922 | 1.100 | 1.285 | 1.469 | 1.631 | 1.812 | 1.994 | 2.175 | |
| k | Nominal Size | 5/32 | 13/64 | 15/64 | 9/32 | 5/16 | 23/64 | 25/64 | 15/32 | 35/64 | 39/64 | 11/16 | 25/32 | 27/32 | 1-5/16 |
| k | 0.163 | 0.211 | 0.243 | 0.291 | 0.323 | 0.371 | 0.403 | 0.483 | 0.563 | 0.627 | 0.718 | 0.813 | 0.878 | 0.974 | |
| k | 0.150 | 0.195 | 0.226 | 0.272 | 0.302 | 0.348 | 0.378 | 0.455 | 0.531 | 0.591 | 0.658 | 0.749 | 0.810 | 0.902 | |
| e | max | 0.505 | 0.577 | 0.650 | 0.722 | 0.866 | 0.938 | 1.083 | 1.299 | 1.516 | 1.732 | 1.949 | 2.165 | 2.382 | 2.598 |
| e | 0.488 | 0.557 | 0.628 | 0.698 | 0.840 | 0.910 | 1.051 | 1.254 | 1.465 | 1.675 | 1.859 | 2.066 | 2.273 | 2.480 |
- The threads-per-inch row (PP UNC) and the s/k 'Nominal Size' rows are the size/thread identification — read vertically, as the collected grid prints them.
Materials
- Inch-series hex screws into Australasian or US-sourced equipment are usually AS/NZS 2465 (or its ISO-inch hybrids) in medium tensile steel, zinc or black; the thread series callout (UNC vs UNF) is the ordering-critical part because the heads are identical across series. Quote size, TPI and series together ("1-1/8 x 7 UNC") on the RFQ — a UNF screw into a UNC hole cross-threads destructively
Ordering & documentation
Documents
Shipments of AS/NZS 2465 Hexagon Screws (UNC and UNF Threads) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for AS/NZS 2465 Hexagon Screws (UNC and UNF Threads) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (AS/NZS 2465 Hexagon Screws (UNC and UNF Threads)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for as/nzs 2465 hexagon screws (unc and unf threads) is 10,000 pieces (applies to the standard sizes and finishes for as/nzs 2465 hexagon screws (unc and unf threads); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for as/nzs 2465 hexagon screws (unc and unf threads) run 3–7 days. Quantities or variants of as/nzs 2465 hexagon screws (unc and unf threads) outside the standard range are confirmed at quotation.
Storage & shipping
AS/NZS 2465 Hexagon Screws (UNC and UNF Threads) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store as/nzs 2465 hexagon screws (unc and unf threads) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Why does the 7/16 size start this table when inch hex screws usually start at 1/4?
The collected AS/NZS 2465 page tabulates the larger structural-adjacent range — 7/16 through 2-1/4 in — where UNC/UNF hex screws are most demanded in plant and structural work; the small-inch sizes live under the machine-screw identities. The head dimensions follow the familiar inch ladder, so once a job crosses into 7/16-and-up hardware, this is the ladder a "1-5/8 x 8 UNC hex screw" callout orders against. If a drawing asks for smaller UNC hex screws, that is the ASME B18.2.1 inch identity.
How do I tell the UNC and UNF columns apart in the table?
The collected grid prints the thread counts as its identifying rows — the UNC ladder (20 down to 6 TPI) and the finer UNF counts behind it — with the head dimensions shared per diameter column. Read a size column vertically: TPI rows, then s, then k, then e. On the order, never write just the diameter; the series and TPI are what your supplier taps, gauges and stocks against, and the two series are not visually distinguishable on the finished screw without a pitch gauge.
What is the MOQ and lead time for AS/NZS 2465 Hexagon Screws (UNC and UNF Threads)?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for AS/NZS 2465 Hexagon Screws (UNC and UNF Threads) state?
State the full designation (AS/NZS 2465 Hexagon Screws (UNC and UNF Threads)), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your AS/NZS 2465 Hexagon Screws (UNC and UNF Threads) inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your AS/NZS 2465 Hexagon Screws (UNC and UNF Threads)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support