DIN 7500M Cross Recessed Countersunk Head Thread Rolling Screws

DIN 7500M cross recessed countersunk head thread rolling screws with metric thread, Type M countersunk head acc. to DIN 965, M2–M10 — flush-seated thread forming, with the collected per-size tables: pitch, b min, d k, k and recess number.

Last updated: 2026-11

Request a Quote

DIN 7500M Cross Recessed Countersunk Head Thread Rolling Screws in an industrial setting
Illustrative image redrawn from real DIN 7500M Cross Recessed Countersunk Head Thread Rolling Screws product references — not a photograph of stocked items.

Specifications

DIN 7500M is the flush-head sibling of DIN 7500C: the same thread-rolling machine screw — full metric thread that forms its own mating thread in a drilled ductile hole — with a countersunk head per DIN 965 (Type M on the collected page) so the finished joint is flush. That combination covers the sheet-metal and housing work where a pan head would snag, interfere with a sliding part, or show: covers, panels, guides, and any assembled pair where the fastener must sit below or level with the surface. The drive is the same cross-recess family, Pozidriv Z per the collected page's note, with the recess number (1–4) following the size ladder. The collected tables run M2 to M10 with pitch, minimum thread length b, head diameter d k (max/min) and head height k — the countersunk series prints k as a max only, per the source. Everything said about the forming joint for DIN 7500C applies: ductile hosts (steel sheet, aluminium, brass, die-castings), a drill-sized hole, a work-hardened burr-free thread, and full serviceability with ordinary M-screws afterwards. Property classes and finishes stay per RFQ.

Standard DIN 7500M — cross recessed countersunk head thread rolling screws, Type M countersunk head acc. to DIN 965 (as printed on the collected page), Pozidriv cross recess Z
Series M2 – M10 (three source column groups: M2/M2.5/M3, (M3.5)/M4/M5, M6/M8/M10; parenthesized non-preferred sizes)
Tabulated geometry Per size: pitch P (0.4–1.5), b min (16–40), d k (max/min, 3.5–18), k (max, printed max-only in the source), Socket No. (1–4)
Head seat Countersunk head, flush in a prepared countersink — the flush alternative to the pan-head DIN 7500C; countersink angle preparation follows the DIN 965 head form
Property classes / finishes Not tabulated by the collected specification — per RFQ (state host material and hole at quotation)
DIN 7500M cross recessed countersunk head thread rolling screws - per-size dimensions (M2 - M3)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch; b = thread length (min); d k = head diameter; k = head height (max only as printed); Socket No. = recess number as printed. Form note: with metric thread and Pozidriv cross recess Z, Type M = countersunk head acc. to DIN 965. Parenthesized sizes are the non-preferred series as printed.
AttributeM2M2.5M3
P — Pitch0.40.450.5
b — min161819
d k — max3.84.75.5
min3.54.45.3
k — max1.21.51.65
Socket No.111
DIN 7500M cross recessed countersunk head thread rolling screws - per-size dimensions ((M3.5) - M5)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch; b = thread length (min); d k = head diameter; k = head height (max only as printed); Socket No. = recess number as printed. Form note: with metric thread and Pozidriv cross recess Z, Type M = countersunk head acc. to DIN 965. Parenthesized sizes are the non-preferred series as printed.
Attribute(M3.5)M4M5
P — Pitch0.60.70.8
b — min202225
d k — max6.57.59.2
min6.147.148.84
k — max1.932.22.5
Socket No.222
DIN 7500M cross recessed countersunk head thread rolling screws - per-size dimensions (M6 - M10)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch; b = thread length (min); d k = head diameter; k = head height (max only as printed); Socket No. = recess number as printed. Form note: with metric thread and Pozidriv cross recess Z, Type M = countersunk head acc. to DIN 965. Parenthesized sizes are the non-preferred series as printed.
AttributeM6M8M10
P — Pitch11.251.5
b — min283440
d k — max1114.518
min10.5714.0717.57
k — max345
Socket No.344

Materials

  • Material and finish specified per RFQ — name the host material and confirm the countersink preparation so the head seats flush at quotation

Ordering & documentation

Documents

Shipments of DIN 7500M Cross Recessed Countersunk Head Thread Rolling Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 7500M Cross Recessed Countersunk Head Thread Rolling Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 7500M Cross Recessed Countersunk Head Thread Rolling Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 7500m cross recessed countersunk head thread rolling screws is 10,000 pieces (applies to the standard sizes and finishes for din 7500m cross recessed countersunk head thread rolling screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 7500m cross recessed countersunk head thread rolling screws run 3–7 days. Quantities or variants of din 7500m cross recessed countersunk head thread rolling screws outside the standard range are confirmed at quotation.

Storage & shipping

DIN 7500M Cross Recessed Countersunk Head Thread Rolling Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 7500m cross recessed countersunk head thread rolling screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

DIN 7500M (countersunk) or DIN 7500C (pan head) thread-rolling screw?

The joint surface decides. Both screws form the same work-hardened metric thread in the same drilled ductile hole — the tables differ only in the head: DIN 7500C's DIN 7985 pan head stands proud with a rounded, snag-free crown and the largest bearing diameter; DIN 7500M's DIN 965 countersunk head sits flush, at the cost of a prepared countersink in the host and a smaller bearing face that suits harder host material (a countersunk head pulled into soft sheet can pull through). So: pan head for covers and brackets where the bump is acceptable or wanted; countersunk where the surface must ride clean — sliding guides, mating faces, finished panels. Two practical notes from the collected tables: the recess ladder (Socket No. 1–4) and head diameters are size-matched across both types, so drivers and holes carry over; and the countersunk k is printed as a max only in the source — the flush seat is set by the countersink you cut, so state the host thickness and preparation with the RFQ.

What is the MOQ and lead time for this screw type?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common sizes in this screw type are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for DIN 7500M Cross Recessed Countersunk Head Thread Rolling Screws?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 7500M Cross Recessed Countersunk Head Thread Rolling Screws state?

State the full designation (DIN 7500M), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 7500M Cross Recessed Countersunk Head Thread Rolling Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your DIN 7500M Cross Recessed Countersunk Head Thread Rolling Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.