ISO 1479 Hexagon Head Tapping Screws
ISO 1479 hexagon head tapping screws ST2,2 to (ST8) — the wrench-driven sheet-metal screw that forms its own thread in thin material, with the collected head/thread geometry ladder and the per-length mass ladder.
Last updated: 2026-11
Specifications
ISO 1479 is the hex-driven member of the tapping-screw family: a full hex head takes a wrench or socket instead of the driver bits the other tapping heads want, so it is the sheet-metal screw for structural-ish panel work where torque matters more than flush finishing — ducting straps, equipment skids, heavy bracketry. The screw rolls its own mating thread as it drives (Type C/F tapping forms per the source's y-allowance rows), which is why the collected table carries the pitch row P per size and the y shear allowance that tells you how much torque the forming phase absorbs before the head seats. The collected ladder covers ST2,2 to (ST8) with the across-corners e minimum (3,38 mm at ST2,2 up to 14,26 at (ST8)), head height k nominal/min./max., and the width-across-flats s pair (3,2 mm nominal at ST2,2 up to 13 at (ST8)). The length ladder runs l 4,5 to 50 with Type C and Type F length limits per size and an approximate carbon-steel mass column per thread. Parenthesised sizes — (ST3,9), (ST5,5), (ST8) — are the source's own non-preferred markings. Property class, material and finish are not tabulated by the collected specification — per RFQ (state the host sheet thickness and material; the tapping form C vs F choice follows it).
| Standard | ISO 1479 — hexagon head tapping screws (self-tapping, wrench-driven) |
|---|---|
| Size range | ST2,2 – (ST8); parenthesised (ST3,9)/(ST5,5)/(ST8) are the source's non-preferred markings |
| Pitch | P: 0,8 (ST2,2) → 2,1 ((ST8)) per the thread row |
| Head geometry | s nominal 3,2 → 13 mm; e min. 3,38 → 14,26; k nominal 1,3 → 5,8 |
| Length ladder | l 4,5 – 50 with Type C/F min./max. limits per size |
| Mass | Approximate carbon-steel kg/1000 pcs per thread, from the source's "Approximate mass (7,85 kg/dm3)" ladder |
| Material / finish | Not tabulated by the collected specification — per RFQ |
| Attribute | Limit | ST2,2 | ST2,9 | ST3,5 | (ST3,9) | ST4,2 | ST4,8 | (ST5,5) | ST6,3 | (ST8) |
|---|---|---|---|---|---|---|---|---|---|---|
| P | 0,8 | 1,1 | 1,3 | 1,3 | 1,4 | 1,6 | 1,8 | 1,8 | 2,1 | |
| a | max. | 0,8 | 1,1 | 1,3 | 1,3 | 1,4 | 1,6 | 1,8 | 1,8 | 2,1 |
| e | min. | 3,38 | 5,4 | 5,95 | 7,59 | 7,59 | 8,71 | 8,71 | 10,95 | 14,26 |
| k | nominal | 1,3 | 1,5 | 2,3 | 2,3 | 2,8 | 3 | 4 | 4,8 | 5,8 |
| k | min. | 1,18 | 1,38 | 2,18 | 2,18 | 2,68 | 2,88 | 3,85 | 4,65 | 5,65 |
| k | max. | 1,42 | 1,62 | 2,42 | 2,42 | 2,92 | 3,12 | 4,15 | 4,95 | 5,95 |
| r | max. | 0,3 | 0,4 | 0,5 | 0,5 | 0,6 | 0,7 | 0,8 | 0,9 | 1,1 |
| s | nominal=max. | 3,2 | 5 | 5,5 | 7 | 7 | 8 | 8 | 10 | 13 |
| s | min. | 3,02 | 4,82 | 5,32 | 6,78 | 6,78 | 7,78 | 7,78 | 9,78 | 12,73 |
| y max. | Type C | 2 | 2,6 | 3,2 | 3,5 | 3,7 | 4,3 | 5 | 6 | 7,5 |
| y max. | Type F | 1,6 | 2,1 | 2,5 | 2,7 | 2,8 | 3,2 | 3,6 | 3,6 | 4,2 |
| l nominal | Type C min. | Type C max. | Type F min. | Type F max. | ST2,2 | ST2,9 | ST3,5 | (ST3,9) | ST4,2 | ST4,8 | (ST5,5) | ST6,3 | (ST8) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4,5 | 3,7 | 5,3 | 3,7 | 4,5 | 0,13 | ||||||||
| 6,5 | 5,7 | 7,3 | 5,7 | 6,5 | 0,17 | 0,32 | |||||||
| 9,5 | 8,7 | 10,3 | 8,7 | 9,5 | 0,23 | 0,43 | 0,74 | 1,08 | 1,29 | 1,68 | |||
| 13 | 12,2 | 13,8 | 12,2 | 13 | 0,31 | 0,55 | 0,92 | 1,29 | 1,54 | 2,02 | 2,72 | 4,25 | |
| 16 | 15,2 | 16,8 | 15,2 | 16 | 0,66 | 1,08 | 1,48 | 1,76 | 2,32 | 3,09 | 4,77 | 8,5 | |
| 19 | 18,2 | 19,8 | 18,2 | 19 | 0,76 | 1,23 | 1,67 | 1,97 | 2,61 | 3,48 | 5,29 | 9,4 | |
| 22 | 21,2 | 22,8 | 20,7 | 22 | 1,38 | 1,87 | 2,19 | 2,89 | 3,86 | 5,82 | 10,3 | ||
| 25 | 24,2 | 25,8 | 23,7 | 25 | 1,54 | 2,06 | 2,4 | 3,19 | 4,25 | 6,35 | 11,2 | ||
| 32 | 30,7 | 33,3 | 30,7 | 32 | 2,91 | 3,88 | 5,14 | 7,57 | 13,3 | ||||
| 38 | 36,7 | 39,3 | 36,7 | 38 | 4,46 | 5,9 | 8,63 | 15,1 | |||||
| 45 | 43,7 | 46,3 | 43,5 | 45 | 5,16 | 6,81 | 9,89 | 17,2 | |||||
| 50 | 48,7 | 51,3 | 48,5 | 50 | 5,66 | 7,46 | 10,8 | 18,7 |
Materials
- Material and finish specified per RFQ — state the host sheet (thickness, steel vs aluminium, pre-tapped or not) and the corrosion exposure; tapping screws are commonly case-hardened steel for thread-forming duty
Ordering & documentation
Documents
Shipments of ISO 1479 Hexagon Head Tapping Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 1479 Hexagon Head Tapping Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ISO 1479 Hexagon Head Tapping Screws), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for iso 1479 hexagon head tapping screws is 10,000 pieces (applies to the standard sizes and finishes for iso 1479 hexagon head tapping screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 1479 hexagon head tapping screws run 3–7 days. Quantities or variants of iso 1479 hexagon head tapping screws outside the standard range are confirmed at quotation.
Storage & shipping
ISO 1479 Hexagon Head Tapping Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 1479 hexagon head tapping screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
When does a hexagon head tapping screw beat a pan or countersunk tapping screw?
Torque and serviceability. The hex head lets a wrench deliver the higher seating torque a thick or pre-punched sheet demands, and it survives repeated service removal with less driver-wear than a slotted or cross recess — the trade is a proud head and a hex that needs clearance around it. The pan/countersunk tapping members of this family (ISO 1481/1482/1483 in this catalog) drive faster with a power tool and finish flush or low, which is why they dominate high-volume panel work while the hex line holds the bracketry and ducting jobs. Within the collected ladders the geometry split is visible: this page's head heights (k nominal 1,3 → 5,8) are sized for wrench engagement, and the y Type C/F rows still give you the thread-forming allowance per host sheet. Property class, material and finish stay per RFQ on all members of the family.
What is the MOQ and lead time for ISO 1479 Hexagon Head Tapping Screws?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ISO 1479 Hexagon Head Tapping Screws state?
State the full designation (ISO 1479), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ISO 1479 Hexagon Head Tapping Screws inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your ISO 1479 Hexagon Head Tapping Screws
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support