ASME B1.1 UNF Thread Limiting Dimensions — External 2A / Internal 2B (#0 – 1 1/2 in)

ASME B1.1 unified fine (UNF) thread limiting dimensions — external class 2A and internal class 2B major, pitch and minor diameter max/min per size from #0 to 1 1/2 in, transcribed row-for-row from the collected charts.

Last updated: 2026-11

Request a Quote

ASME B1.1 UNF Thread Limiting Dimensions — External 2A / Internal 2B (#0 – 1 1/2 in) in an industrial setting
Illustrative image redrawn from real ASME B1.1 UNF Thread Limiting Dimensions — External 2A / Internal 2B (#0 – 1 1/2 in) product references — not a photograph of stocked items.

Specifications

The fine-series counterpart to the UNC limits page: ASME B1.1 unified fine (UNF) limiting diameters for external 2A and internal 2B threads, #0 through 1 1/2 in. Fine threads pack more flank into the same diameter — reading the collected charts at 1/2-20: external 2A runs major 0.4987/0.4906 in, pitch diameter 0.4662/0.4619, minor max 0.4392, with the internal 2B at major min 0.5000, pitch 0.4731/0.4675, minor 0.4570/0.4460. Compared to 1/2-13 UNC, the fine thread leaves a larger core (better tensile capacity in the bolt), allows finer clamp adjustment per turn, and resists vibration better — which is why automotive, aerospace and instrumentation hardware leans fine. The price is handling sensitivity: shallower threads damage more easily, assembly needs cleaner holes and more torque control, and the tolerance bands themselves are similar in width but gaged at higher TPI. The charts cover UNF only — UNEF stays with the pitch chart page — and 3A/3B classes are not tabulated — per RFQ. Three source quirks (the "05828" d2 min at 5/8-18 external, the "1.4190" minor max at 1 1/4-12, and the 0.5625 major min repeated at 5/8-18 internal) are reproduced as printed and footnoted on the tables below.

Standard ASME B1.1 — unified inch screw threads, UNF (fine) series limiting dimensions
Size range #0 – 1 1/2 in; external (2A) 24 rows, internal (2B) 24 rows, repeated source header blocks merged
External 2A limits (in) Per row: major d max/min, pitch d2 max/min, minor max; example 1/2-20: 0.4987/0.4906, 0.4662/0.4619, 0.4392
Internal 2B limits (in) Per row: major min, pitch D2 max/min, minor D1 max/min; example 1/2-20: 0.5000, 0.4731/0.4675, 0.4570/0.4460
Other classes / series 3A/3B and UNEF limits not tabulated by the collected charts — per RFQ (pitch selection: see the ASME B1.1 pitch chart page)
ASME B1.1 UNF (unified fine) external thread limiting dimensions, class 2A — #0 – 1 1/2 inAll dimensions in inches. d = major diameter (max/min); d2 = pitch diameter (max/min); minor diameter max. Per-size rows transcribed from the collected chart. Class 3A and UNEF limits are not tabulated by the collected chart — per RFQ.
Nominal DesignationTPIClassd — Major (max)d (min)d2 — Pitch (max)d2 (min)Minor Dia. (max)
#0 - 80802A0.05950.05630.05140.04960.0446
#1 - 72722A0.07240.06890.06340.06150.0559
#2 - 64642A0.08540.08160.07530.07330.0668
#3 - 56562A0.09830.09420.08670.08450.0771
#4 - 48482A0.11130.10680.09790.09540.0864
#5 - 44442A0.12430.11950.10950.10700.0972
#6 - 40402A0.13720.13210.12100.11840.1074
#8 - 36362A0.16320.15770.14520.14240.1301
#10 - 32322A0.18910.18310.16880.16580.1519
#12 - 28282A0.21500.20850.19180.18860.1724
1/4 - 28282A0.24900.24250.22580.22250.2064
5/16 - 24242A0.31140.30420.28430.28060.2618
3/8 - 24242A0.37390.36670.34680.34300.3243
7/16 - 20202A0.43620.42810.40370.39950.3767
1/2 - 20202A0.49870.49060.46620.46190.4392
9/16 - 18182A0.56110.55240.52500.52050.4950
5/8 - 18182A0.62360.61490.5875058280.5575
3/4 - 16162A0.74850.73910.70790.70290.6740
7/8 - 14142A0.87340.86310.82700.82160.7884
1 - 12122A0.99820.98680.94410.93820.8990
1 1/8 - 12122A1.12321.11181.06911.06311.0240
1 1/4 - 12122A1.24821.23681.19411.18791.4190
1 3/8 - 12122A1.37311.36171.31901.31271.2739
1 1/2 - 12122A1.49811.48671.44401.43761.3989
  • Row 17 (5/8 - 18): Source prints the 5/8-18 d2 min as "05828" — a dropped decimal point against the ladder (d2 min runs 0.0496…0.5825); reproduced as printed.
  • Row 22 (1 1/4 - 12): Source prints the 1 1/4-12 minor diameter max as "1.4190" — inconsistent with the 12-TPI ladder (1 1/8-12: 1.0240, 1 3/8-12: 1.2739); reproduced as printed.
  • The source prints the size ladder in repeated header blocks between column groups; the groups are merged here and repeated headers are not reproduced as data rows.
ASME B1.1 UNF (unified fine) internal thread limiting dimensions, class 2B — #0 – 1 1/2 inAll dimensions in inches. D = major diameter (min, single limit); D2 = pitch diameter (max/min); D1 = minor diameter (max/min). Per-size rows transcribed from the collected chart. Class 3B and UNEF internal limits are not tabulated by the collected chart — per RFQ.
Nominal DesignationTPIClassD — Major (min)D2 — Pitch (max)D2 (min)D1 — Minor (max)D1 (min)
#0 - 80802B0.06000.05420.05190.05140.0465
#1 - 72722B0.07300.06650.06400.06350.0580
#2 - 64642B0.08600.07860.07590.07530.0691
#3 - 56562B0.09900.09020.08740.08650.0797
#4 - 48482B0.11200.10160.09850.09680.0894
#5 - 44442B0.12500.11340.11020.10790.1004
#6 - 40402B0.13800.12520.12180.11900.1110
#8 - 36362B0.16400.14960.14600.14200.1340
#10 - 32322B0.19000.17360.16970.16400.1560
#12 - 28282B0.21600.19700.19280.18600.1770
1/4 - 28282B0.25000.23330.22680.22000.2110
5/16 - 24242B0.31250.29250.28540.27700.2670
3/8 - 24242B0.37500.35530.34790.34000.3300
7/16 - 20202B0.43750.41310.40500.39500.3830
1/2 - 20202B0.50000.47310.46750.45700.4460
9/16 - 18182B0.56250.53230.52640.51500.5020
5/8 - 18182B0.56250.59490.58890.57800.5650
3/4 - 16162B0.75000.71590.70940.69600.6820
7/8 - 14142B0.87500.83560.82660.81400.7980
1 - 12122B1.00000.95350.94590.92800.9100
1 1/8 - 12122B1.12501.07871.07091.05301.0350
1 1/4 - 12122B1.25001.20391.19591.17801.1600
1 3/8 - 12122B1.37501.32911.32091.30301.2850
1 1/2 - 12122B1.50001.45421.44591.42801.4100
  • Row 17 (5/8 - 18): Source prints the 5/8-18 major diameter min as "0.5625" — duplicating the 9/16-18 value one row above instead of the ladder-consistent 0.6250; reproduced as printed.
  • The source prints the size ladder in repeated header blocks between column groups; the groups are merged here and repeated headers are not reproduced as data rows.

Materials

  • Thread class, gaging and coating sequence specified per RFQ — fine threads have less allowance headroom per flank; state finish and class together at quotation

Ordering & documentation

Documents

Shipments of ASME B1.1 UNF Thread Limiting Dimensions — External 2A / Internal 2B (#0 – 1 1/2 in) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASME B1.1 UNF Thread Limiting Dimensions — External 2A / Internal 2B (#0 – 1 1/2 in) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASME B1.1 UNF Thread Limiting Dimensions — External 2A / Internal 2B (#0 – 1 1/2 in)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for asme b1.1 unf thread limiting dimensions — external 2a / internal 2b (#0 – 1 1/2 in) is 10,000 pieces (applies to the standard sizes and finishes for asme b1.1 unf thread limiting dimensions — external 2a / internal 2b (#0 – 1 1/2 in); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for asme b1.1 unf thread limiting dimensions — external 2a / internal 2b (#0 – 1 1/2 in) run 3–7 days. Quantities or variants of asme b1.1 unf thread limiting dimensions — external 2a / internal 2b (#0 – 1 1/2 in) outside the standard range are confirmed at quotation.

Storage & shipping

ASME B1.1 UNF Thread Limiting Dimensions — External 2A / Internal 2B (#0 – 1 1/2 in) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store asme b1.1 unf thread limiting dimensions — external 2a / internal 2b (#0 – 1 1/2 in) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Fine (UNF) threads carry similar tolerances to coarse — so what actually changes when a drawing moves from UNC to UNF?

What changes is where the metal is and what assembly must deliver. The collected charts show it directly: at 1/2 in, UNF runs 20 TPI against UNC's 13, so the fine thread's minor diameter max is 0.4392 in versus roughly 0.4069 for the coarse — a larger core, which is why a fine-thread bolt of the same grade carries more tensile load and why fatigue-critical and vibration-exposed joints specify fine. Per turn, the nut advances less (finer clamp adjustment), and the shallower helix resists backing off. Against those gains, three operational costs. First, engagement length: the fine thread needs a longer engaged length to develop the same stripping strength, so thin tapped walls or short bosses may be forced back to coarse. Second, handling: shallower flanks bruise more easily — a dropped fine-thread part that a coarse one would shrug off can be ruined, and dirty or paint-bridged holes assemble harder. Third, gaging discipline: the tolerance bands gage at higher TPI, so worn NOGO rings and skip-dirty plug gauges mislead more readily — keep gage calibration tighter on fine work. The limits on this page give both faces of the 2A/2B pair for checking any of it; 3A/3B or UNEF stays per RFQ.

What is the MOQ and lead time for threaded parts on this standard?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Common thread sizes on this standard are widely stocked; confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for ASME B1.1 UNF Thread Limiting Dimensions — External 2A / Internal 2B (#0 – 1 1/2 in)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ASME B1.1 UNF Thread Limiting Dimensions — External 2A / Internal 2B (#0 – 1 1/2 in) state?

State the full designation (ASME B1.1), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASME B1.1 UNF Thread Limiting Dimensions — External 2A / Internal 2B (#0 – 1 1/2 in) inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ASME B1.1 UNF Thread Limiting Dimensions — External 2A / Internal 2B (#0 – 1 1/2 in)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.