DIN 7991 Countersunk Socket Head Cap Screws

Hexagon socket countersunk head cap screws per DIN 7991 — current norm DIN EN ISO 10642 — M3 to M24 in steel classes 8.8/10.9/12.9 or A2/A4 stainless, thread 6g. The flush-head socket screw for countersunk, boss-level fastening.

Last updated: 2026-11

Request a Quote

DIN 7991 Countersunk Socket Head Cap Screws in an industrial setting
Illustrative image redrawn from real DIN 7991 Countersunk Socket Head Cap Screws product references — not a photograph of stocked items.

Specifications

The countersunk socket head cap screw disappears into the part: a 90° conical head seated in a countersink leaves the surface flush, while the internal hexagon still takes the high torque that keeps socket screws the choice where clamp load matters. The collected standard table runs M3 through M24 in steel property classes 8.8, 10.9 and 12.9 or A2/A4 stainless, thread tolerance 6g. At M10 the head seats at 20 mm maximum diameter with a 5.5 mm head height, a 6 mm hex socket and a 4.4 mm key engagement — proportions that suit bosses, mold cavities and fixture plates where a protruding head would foul the stroke. The DIN 7991 designation is superseded by DIN EN ISO 10642; order whichever your drawing calls out. Note the countersink is part of the purchase decision: the head angle and the flush seating depend on the mating countersink being cut to match.

Standard DIN 7991 — hexagon socket countersunk head cap screw; current norm DIN EN ISO 10642
Size range M3 – M24
Dimensions at M10 dk (head diameter) nominal=max 20 mm (min 19.48 mm); k (head height) max 5.5 mm; s (hex socket) nominal 6 mm; t (key engagement) nominal=max 4.4 mm; e min 6.86 mm; P (pitch) 1.5 mm
Thread 6g
Strength classes Steel 8.8, 10.9, 12.9; stainless A2, A4
dk at M10 nominal=max 20 (min 19,48)
k at M10 max 5,5
s at M10 nominal 6 (min 6,02/max 6,14)
t at M10 nominal=max 4,4
e at M10 min 6,86
P at M10 1,5
da at M10 max 11,2
ds at M10 nominal=max 10

Materials

  • Steel
  • Alloy steel
  • Stainless steel

Ordering & documentation

Documents

Shipments of DIN 7991 Countersunk Socket Head Cap Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 7991 Countersunk Socket Head Cap Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 7991 Countersunk Socket Head Cap Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 7991 countersunk socket head cap screws is 10,000 pieces (applies to the standard sizes and finishes for din 7991 countersunk socket head cap screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 7991 countersunk socket head cap screws run 3–7 days. Quantities or variants of din 7991 countersunk socket head cap screws outside the standard range are confirmed at quotation.

Storage & shipping

DIN 7991 Countersunk Socket Head Cap Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 7991 countersunk socket head cap screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

DIN 7991 and ISO 10642 — which designation should I order?

They cover the same screw: the collected standard table states DIN 7991's current norm is DIN EN ISO 10642, with ISO 10642 listed as the equivalent norm. The practical selection rule is the drawing: order the designation your documentation calls out and confirm thread size, length and strength class against the order. What you should check separately is the countersink — the flush finish this screw exists for depends on the mating 90° seat, so confirm the counterbore spec together with the screw.

The DIN 7991 table and the ISO 10642 table print different head heights — which do I cut the countersink to?

Cut it to the head dimensions of the designation you actually order. The two tables are both correct for their own standard: the DIN 7991 table on this page carries the withdrawn DIN 7991 series (at M10 a 5.5 mm head height with a 4.4 mm key engagement), while DIN EN ISO 10642 raised the head (6.2 mm head height at M10). A 0.7 mm head-height difference is enough to leave a proud head or a shallow seat on a flush application, so match the countersink depth to the ordered designation — and if your drawing calls out ISO 10642, use the ISO 10642 table, not this one.

What is the MOQ and lead time for these screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these screws state?

State the standard designation (for example DIN 7991, DIN 916 or DIN 7985 — or the ISO designation your drawing prints), thread size and pitch, length or head dimension, strength class or material (such as 12.9, 45H, 4.8, A2-70, A4-80 or brass), finish (black oxide, zinc plated, or plain), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 7991 Countersunk Socket Head Cap Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your DIN 7991 Countersunk Socket Head Cap Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.