ISO 1483 Slotted Raised Countersunk Head Tapping Screws

ISO 1483 slotted raised countersunk head tapping screws ST2,2 to ST6,3 — the countersunk body with a low rounded crown, with the collected geometry ladder including the f crown height and rf crown radius rows.

Last updated: 2026-11

Request a Quote

ISO 1483 Slotted Raised Countersunk Head Tapping Screws in an industrial setting
Illustrative image redrawn from real ISO 1483 Slotted Raised Countersunk Head Tapping Screws product references — not a photograph of stocked items.

Specifications

ISO 1483 splits the difference between the flush and the domed tapping heads: a standard countersunk body with a shallow crown rising above the sheet. You get the countersunk head's centered seating in a csk-prepped hole plus a small proud button (the collected f row, approx. 0,7 mm at ST2,2 up to 2 at ST6,3) that keeps a driver engaged where paint, debris or panel warping would bury a flush slot. The crown geometry is carried in two rows the flush member lacks: f (crown height) and rf (crown radius, 3,8 → 11,1 mm — the radius that blends the button into the cone). The rest of the ladder matches the family: dk nominal=max./min. (4,3/4 at ST2,2 up to 12,4/11,97), the slot triple n nominal/min./max. (with the same verbatim ST4,8 "12" print defect flagged), slot depth t min./max. 0,95/1,15 → 2,85/3,45 (deeper than the flush member's — the crown gives the metal somewhere to go), and the y Type C/F thread-end allowances. Length ladder l 6,5 to 38 with Type C/F limits and approximate mass columns per thread. Property class, material and finish are not tabulated — per RFQ.

Standard ISO 1483 — slotted raised countersunk head tapping screws
Size range ST2,2 – ST6,3; parenthesised (ST3,9) is the source's non-preferred marking
Raised crown f approx. 0,7 → 2 mm; crown radius rf approx. 3,8 → 11,1
Head diameter dk nominal=max. 4,3 → 12,4 mm (min. 4 → 11,97)
Slot n nominal 0,6 → 1,6 (ST4,8 cell prints 12 verbatim — flagged); t min. 0,95 → 2,85, max. 1,15 → 3,45
Length ladder l 6,5 – 38 with Type C/F min./max. limits and approximate mass per thread
Material / finish Not tabulated by the collected specification — per RFQ
ISO 1483 slotted raised countersunk head tapping screws - attribute rows per thread size (ST2,2 - ST6,3)All dimensions in millimetres. Attribute labels follow the source: P = thread pitch, a = thread end length, dk = head diameter (nominal = max.), f = raised portion height (approx.), k = total head height (approx.), n = slot width, r = countersink edge radius, rf = raised-crown radius, t = slot depth, y = thread-end shear allowance by tapping-screw type (Type C / Type F).
AttributeLimitST2,2ST2,9ST3,5(ST3,9)ST4,2ST4,8ST5,5ST6,3
P0,81,11,31,31,41,61,81,8
amax.0,81,11,31,31,41,61,81,8
dknominal=max.4,35,56,87,58,19,510,812,4
dkmin.45,26,447,147,749,1410,3711,97
fapprox.0,70,91,21,31,41,51,72
kapprox.1,31,72,12,32,533,43,8
nnominal0,60,8111,2121,61,6
nmin.0,660,861,061,061,261,261,661,66
nmax.0,811,21,21,511,511,911,91
rmax.0,81,11,41,51,61,92,12,4
rfapprox.3,84,65,466,68,29,411,1
tmin.0,951,251,551,71,852,152,422,85
tmax.1,151,51,92,052,252,62,953,45
y max.Type C22,63,23,53,74,356
y max.Type F1,62,12,52,72,83,23,63,6
  • Row 7 (n): n nominal at ST4,8 prints 12 against the sibling progression 0,6/0,8/1/1/1,2/…/1,6/1,6 — a lost decimal point suspected. Carried verbatim, not normalized.
ISO 1483 thread length ladder - nominal/min./max. by type with approximate mass per thread (l 6,5 - 38)All dimensions in millimetres; the merged source header rows are rendered into the column labels. l limits: Type C min./max. and Type F min./max. Mass columns carry the source's own header verbatim: "Approximate mass (7,85 kg/dm3), per 1000 units in kg", blank where the source shows no mass.
l nominalType C min.Type C max.Type F min.Type F max.ST2,2ST2,9ST3,5(ST3,9)ST4,2ST4,8ST5,5ST6,3
6,55,77,35,76,50,180,332
9,58,710,38,79,50,240,440,7210,8881,071,53
1312,213,812,2130,310,5660,8981,111,321,882,743,46
1615,216,815,2160,370,6741,051,31,532,183,124
1918,219,818,2190,7821,21,491,742,483,514,54
2221,222,820,7221,351,681,952,783,895,08
2524,225,823,7251,511,872,163,084,285,62
3230,733,330,7322,653,785,196,88
3836,739,336,7384,385,977,96

Materials

  • Material and finish specified per RFQ — same tapping-body chemistry questions as the flush member (case-hardened steel is standard); state host sheet and finish at quotation

Ordering & documentation

Documents

Shipments of ISO 1483 Slotted Raised Countersunk Head Tapping Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 1483 Slotted Raised Countersunk Head Tapping Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 1483 Slotted Raised Countersunk Head Tapping Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for iso 1483 slotted raised countersunk head tapping screws is 10,000 pieces (applies to the standard sizes and finishes for iso 1483 slotted raised countersunk head tapping screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 1483 slotted raised countersunk head tapping screws run 3–7 days. Quantities or variants of iso 1483 slotted raised countersunk head tapping screws outside the standard range are confirmed at quotation.

Storage & shipping

ISO 1483 Slotted Raised Countersunk Head Tapping Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 1483 slotted raised countersunk head tapping screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why is the raised head's slot depth (t) so much deeper than the flush member's?

The crown is where the metal lives. The collected ladders show t min. running 0,95 → 2,85 mm on ISO 1483 against 0,4 → 1,2 on the flush ISO 1482 across the same sizes — roughly double. A flush countersunk head has only the cone above the hole to cut a slot into, so the slot bottoms out early; the raised crown adds the f row (0,7 → 2 mm) of extra height, and the slot extends into it, which is exactly what keeps a flat blade from camming out before the screw is tight. The same logic shows in the crown radius rf 3,8 → 11,1: the button blends into the cone gradually instead of a sharp flush edge. Practical consequence: if your application truly needs flush (sliding workpieces, seals), the raised head is not a substitute however similar the hole is; if you only wanted a low-profile head and can tolerate f above the sheet, the raised member drives more reliably. Slot-n ST4,8 print defect flagged on both pages; material and finish per RFQ.

What is the MOQ and lead time for ISO 1483 Slotted Raised Countersunk Head Tapping Screws?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 1483 Slotted Raised Countersunk Head Tapping Screws state?

State the full designation (ISO 1483), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 1483 Slotted Raised Countersunk Head Tapping Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ISO 1483 Slotted Raised Countersunk Head Tapping Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.