Sheet Metal Thread Dimensions (Type AB and Type U Tapping Screws)

Thread-form dimensions for ANSI type AB thread-forming tapping screws (formerly type BA) — major/minor diameter by screw size 0 through the ladder — and type U metallic drive screws: starts, outside and pilot diameters.

Last updated: 2026-11

Request a Quote

Sheet Metal Thread Dimensions (Type AB and Type U Tapping Screws) in an industrial setting
Illustrative image redrawn from real Sheet Metal Thread Dimensions (Type AB and Type U Tapping Screws) product references — not a photograph of stocked items.

Specifications

Tapping screws form their own mating thread, so the screw's thread geometry is the hole specification: too big a pilot and the formed thread is weak, too small and the screw stalls or the sheet tears. The collected tables give the two numbers that set it. Type AB (the current designation of the old type BA, and the most common thread-forming form): screw sizes #0 (0.0600) through the ladder with threads per inch from 48 down, major diameter max/min (0.060/0.054 at #0) and minor diameter max/min (0.036/0.033) — the minor pair brackets what the formed thread must grip. Type U metallic drive screws are the hammer-in form: the table prints thread starts (the multiple-start helix that lets them drive straight), outside and pilot diameters in a repeated side-by-side grid as the source lays it out. These are the ANSI thread-form tables behind the DIN/ISO tapping-screw product dimensions registered elsewhere — the head, length and material choices sit on those product pages; this page is the thread-form geometry that sizes the sheet-metal hole.

Type AB (formerly BA) Thread-forming tapping screws, sizes #0-0.0600 (48 tpi) up the ladder: major diameter max/min 0.060/0.054 at #0; minor diameter max/min 0.036/0.033 — banner and footnote-letter layout carried verbatim
Type U metallic drive screws Nom. size / number of starts / outside dia. max-min / pilot dia. max-min, grid repeated side by side as printed — the hammer-drive thread form
Use The minor-diameter columns set the pilot/filled-hole band for the formed thread; the major columns set clearance and engagement checks in the sheet gauge being fastened
Not tabulated Types A/B/BP/BF/BT forms (the companion sheet-metal-self-threading identity), hole preparation by sheet thickness and material, screw lengths and heads — see the companion page or per RFQ
Sheet metal thread dimensions — type AB thread forming tapping screws (formerly type BA)Dimensions in inches. Stacked headers carried verbatim (D/d Max-Min splits under the type-AB banner row); footnote letters attached to headers (as printed) are the source's own.
Type AB (Formerly BA)
Nominal Size - Basic Screw Dia.Threads per inchDd
Nominal Size - Basic Screw Dia.Threads per inchMajor DiameterMinor Diameter
Max.Min.Max.Min.
0 - 0.0600480.0600.0540.0360.033
1 - 0.0730420.0750.0690.0490.046
2 - 0.0860320.0880.0820.0640.060
3 - 0.0990280.1010.0950.0750.071
4 - 0.1120240.1140.1080.0860.082
5 - 0.1250200.1300.1230.0940.090
6 - 0.1380200.1390.1320.1040.099
7 - 0.1510190.1540.1470.1150.109
8 - 0.1640180.1660.1590.1220.116
10 - 0.1900160.1890.1820.1410.135
12 - 0.2160140.2150.2080.1640.157
1⁄4 - 0.2500140.2460.2370.1920.185
5⁄16 - 0.3125120.3150.3060.2440.236
3⁄8 - 0.3750120.3800.3710.3090.299
7⁄16 - 0.4375100.4400.4290.3590.349
1⁄2 - 0.5000100.5040.4930.4230.413
Type A
Nominal Sizea - Basic Screw DiameterThreads per inchDd
Nominal Sizea - Basic Screw DiameterThreads per inchMajor DiameterMinor Diameter
Max.Min.Max.Min.
0 - 0.0600400.0600.0570.0420.039
1 - 0.0730320.0750.0720.0510.048
2 - 0.0860320.0880.0840.0610.056
3 - 0.0990280.1010.0970.0760.071
4 - 0.1120240.1140.1100.0830.078
5 - 0.1250200.1300.1260.0950.090
6 - 0.1380180.1410.1360.1020.096
7 - 0.1510160.1580.1520.1140.108
8 - 0.1640150.1680.1620.1230.116
10 - 0.1900120.1940.1880.1330.126
12 - 0.2160110.2210.2150.1620.155
14 - 0.2420100.2540.2480.1850.178
16 - 0.2680100.2800.2740.1970.189
18 - 0.294090.3060.3000.2170.209
20 - 0.320090.3330.3270.2340.226
24 - 0.372090.3900.3830.2910.282
Sheet metal thread dimensions — type U metallic drive screwsDimensions in inches. Stacked headers carried verbatim; the grid repeats the Nom./Starts/Out./Pilot group twice side by side as printed.
Type U Metallic Drive Screws
Nom. SizeNo. of StartsOut. Dia.Pilot Dia.Nom. SizeNo. of StartsOut. Dia.Pilot Dia.
Max.Min.Max.Min.Max.Min.Max.Min.
0060.0600.0570.0490.046880.1670.1620.1360.132
060.0750.0720.0630.0601080.1820.1770.1500.146
280.1000.0970.0830.0801280.2120.2060.1770.173
470.1160.1120.0960.0921490.2420.2360.2020.198
670.1400.1360.1160.1125⁄16110.3150.3090.2720.267
780.1540.1500.1260.1223⁄8120.3780.3710.3340.329

Materials

  • The AB form works in plyable sheet metals and plastics; the U drive form displaces rather than cuts and suits blind, torque-free plugs in soft metals and plastics. Pilot-hole selection depends on the sheet material as much as the screw size — steel, aluminum and sheet modulus each shift the band — so pair this geometry with a tested pilot for the actual gauge/material, and quote non-standard sheets per RFQ

Ordering & documentation

Documents

Shipments of Sheet Metal Thread Dimensions (Type AB and Type U Tapping Screws) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Sheet Metal Thread Dimensions (Type AB and Type U Tapping Screws) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Sheet Metal Thread Dimensions (Type AB and Type U Tapping Screws)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for sheet metal thread dimensions (type ab and type u tapping screws) is 10,000 pieces (applies to the standard sizes and finishes for sheet metal thread dimensions (type ab and type u tapping screws); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for sheet metal thread dimensions (type ab and type u tapping screws) run 3–7 days. Quantities or variants of sheet metal thread dimensions (type ab and type u tapping screws) outside the standard range are confirmed at quotation.

Storage & shipping

Sheet Metal Thread Dimensions (Type AB and Type U Tapping Screws) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store sheet metal thread dimensions (type ab and type u tapping screws) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Type AB replaced type BA — does that change the hole I drill?

No — the AB designation carried the same thread form forward with tightened manufacturing tolerances, and the collected table's geometry is the controlling data either way: at #0, a major diameter of 0.054-0.060 and a minor of 0.033-0.036. The formed thread's engagement is set against the minor diameter (the crest of the formed thread fills against the screw's minor), and the practical band is set by sheet thickness and material ductility — a soft aluminum sheet takes the lower end of the pilot band, springy steel the higher. What did change between BA and AB generations is quality-consistency (major/minor stayed in band across production lots), not the form. Use this table's columns for the hole decision, and treat "BA" on a legacy drawing as "AB" for geometry — but confirm the engagement band on the actual sheet gauge, since the table prints thread geometry, not hole charts.

What is a "metallic drive screw" (type U) and when is it the right choice?

A hammer-in fastener: multiple thread starts on a hard, blunt form that is driven straight into a pilot or unfilled hole with no rotational torque at all — the collected table's "number of starts" column is the tell, since a single-start form would twist rather than drive. It holds by displacement in soft metals and plastics, which makes it the answer for plugs, nameplates and blind locations where a screwdriver cannot reach or torque control is impossible — and the wrong answer anywhere the joint sees vibration or needs removal, because removal typically destroys the formed thread and the screw is not designed to be re-driven. Size it by the pilot-diameter column (the hole it displaces into), not by the outside diameter, and treat retention values as application-test results, not catalogue ratings — the collected page carries geometry only.

What is the MOQ and lead time for Sheet Metal Thread Dimensions (Type AB and Type U Tapping Screws)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for Sheet Metal Thread Dimensions (Type AB and Type U Tapping Screws) state?

State the full designation (Sheet Metal Thread Dimensions (Type AB and Type U Tapping Screws)), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Sheet Metal Thread Dimensions (Type AB and Type U Tapping Screws) inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your Sheet Metal Thread Dimensions (Type AB and Type U Tapping Screws)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.