ISO 7050 Cross Recessed Countersunk Head Tapping Screws (Form C)

ISO 7050 cross recessed countersunk head tapping screws, Form C — ST2,2 to ST6,3 — the flush power-tool sheet-metal screw, with the collected recess sizing, Type H/Z driving ladders and the duplicated l = 38 mass rows carried verbatim.

Last updated: 2026-11

Request a Quote

ISO 7050 Cross Recessed Countersunk Head Tapping Screws (Form C) in an industrial setting
Illustrative image redrawn from real ISO 7050 Cross Recessed Countersunk Head Tapping Screws (Form C) product references — not a photograph of stocked items.

Specifications

ISO 7050 mates the power-tool cross recess to the flush countersunk head: csk-prep the hole, drive with a No. 1/2/3 Phillips-class bit, and nothing stands proud of the sheet. The collected ladder runs ST2,2 to ST6,3 with the flush head geometry (dk nominal=max./min. 4,3/4 up to 12,4/11,97; approximate head height k; countersink edge radius r 0,8 → 2,4), the cross-recess No. ladder (1/1/2/2/2/2/3/3), and the Type H and Type Z driving rows — m depth gauges (approx. 2,5 → 7,1 and 2,4 → 6,7) plus the source's "Penetration deptd" min./max. limits per size. The length ladder runs l 6,5 to 38 with approximate mass columns, and it carries a source defect the table flags: the l = 38 row is printed twice, once with mass cells from ST5,5 onward and once from ST4,8 — both rows carried verbatim, not de-duplicated, so read the pair as the source's own two-panel mass capture. Note what the head does not carry: the raised member's f/rf crown rows are absent here (that is ISO 7051). Property class, material and finish are not tabulated — per RFQ.

Standard ISO 7050 — cross recessed countersunk head tapping screws, Form C
Size range ST2,2 – ST6,3; parenthesised (ST3,9) is the source's non-preferred marking
Head diameter dk nominal=max. 4,3 → 12,4 mm (min. 4 → 11,97); k approx. 1,3 → 3,8
Cross recess No. 1 (ST2,2/ST2,9), No. 2 (ST3,5–ST4,8), No. 3 (ST5,5/ST6,3)
Recess driving data Type H m approx. 2,5 → 7,1 / Type Z m approx. 2,4 → 6,7; penetration min./max. per size
Length ladder l 6,5 – 38 with approximate mass per thread; source prints the l = 38 row twice (flagged verbatim)
Material / finish Not tabulated by the collected specification — per RFQ
ISO 7050 cross recessed countersunk head tapping screws, Form C - attribute rows per thread size (ST2,2 - ST6,3)All dimensions in millimetres. Attribute labels follow the source: P = thread pitch, a = thread end length, dk = head diameter (nominal = max.), k = head height (approx.), r = countersink edge radius, Cross recess No. = recess size; Type H / Type Z carry the source's own labels m (recess depth gauge, approx.) and "Penetration deptd" (min./max.) verbatim; y = thread-end shear allowance by tapping-screw type.
AttributeLimitST2,2ST2,9ST3,5(ST3,9)ST4,2ST4,8ST5,5ST6,3
P0,81,11,31,31,41,61,81,8
amax.0,81,11,31,31,41,61,81,8
dknominal=max.4,35,56,87,58,19,510,812,4
dkmin.45,26,447,147,749,1410,3711,97
kapprox.1,31,72,12,32,533,43,8
rmax.0,81,11,41,51,61,92,12,4
Cross recessNo.11222233
Type H mapprox.2,534,24,64,75,16,87,1
Type H Penetration deptdmin.1,021,41,622,032,112,592,953,33
Type H Penetration deptdmax.1,321,72,122,532,623,13,533,91
Type Z mapprox.2,42,93,94,14,34,76,26,7
Type Z Penetration deptdmin.1,11,481,61,852,052,642,723,38
Type Z Penetration deptdmax.1,351,732,062,312,513,13,183,84
y max.Type C22,63,23,53,74,356
y max.Type F1,62,12,52,72,83,23,63,6
ISO 7050 thread length ladder - nominal/min./max. by type with approximate mass per thread (l 6,5 - 38)All dimensions in millimetres; the merged source header rows are rendered into the column labels. l limits: Type C min./max. and Type F min./max. Mass columns carry the source's own header verbatim: "Approximate mass (7,85 kg/dm3), per 1000 units in kg", blank where the source shows no mass. The source's Table 2 header omits the thread-size row; the mass columns run ST2,2 → ST6,3 left-to-right per Table 1's thread order.
l nominalType C min.Type C max.Type F min.Type F max.ST2,2ST2,9ST3,5(ST3,9)ST4,2ST4,8ST5,5ST6,3
6,55,77,35,76,50,140,242
9,58,710,38,79,50,20,350,5480,6580,7751,1
1312,213,812,2130,270,4760,7220,881,021,452,112,53
1615,216,815,2160,330,5840,8711,071,231,752,493,07
1918,219,818,2190,6921,021,261,442,052,873,61
2221,222,820,7221,171,451,652,353,264,15
2524,225,823,7251,321,641,862,653,654,69
3230,733,330,7322,353,354,565,95
3836,739,336,7385,347,03
3836,739,336,7384,526,458,82
  • Row 10 (38): The source prints the l = 38 row twice — first with mass cells from ST5,5 only, then again with mass cells from ST4,8. Both rows carried verbatim (row indices 8 and 9 here), not de-duplicated.

Materials

  • Material and finish specified per RFQ — state the host sheet (the countersink cone needs thickness) and plating; case-hardened steel is the standard tapping body

Ordering & documentation

Documents

Shipments of ISO 7050 Cross Recessed Countersunk Head Tapping Screws (Form C) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 7050 Cross Recessed Countersunk Head Tapping Screws (Form C) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 7050 Cross Recessed Countersunk Head Tapping Screws (Form C)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for iso 7050 cross recessed countersunk head tapping screws (form c) is 10,000 pieces (applies to the standard sizes and finishes for iso 7050 cross recessed countersunk head tapping screws (form c); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 7050 cross recessed countersunk head tapping screws (form c) run 3–7 days. Quantities or variants of iso 7050 cross recessed countersunk head tapping screws (form c) outside the standard range are confirmed at quotation.

Storage & shipping

ISO 7050 Cross Recessed Countersunk Head Tapping Screws (Form C) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 7050 cross recessed countersunk head tapping screws (form c) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why does the collected length table show two l = 38 rows with different mass cells?

Because the source prints it that way. In the captured page the l = 38 trade-size row appears twice: the first instance carries approximate-mass cells beginning at ST5,5, the second beginning at ST4,8. That is a capture/printing artifact, not two different screws — l 38 has one set of Type C/F length limits (36,7/39,3 on both rows, identical). The batch discipline here is verbatim-plus-flag: both rows are carried exactly as the source prints them with a table note, rather than silently merged, so any future re-check against the live page can see what the capture held. If you are reading the mass columns for a shipping estimate, the safest read is the union of the two rows (ST4,8 through ST6,3 populated, no conflicting values — the overlapping ST5,5 cells agree across rows where both print). The duplicate is documented on the page's table note; geometry is unaffected. Material and finish remain per RFQ.

What is the MOQ and lead time for ISO 7050 Cross Recessed Countersunk Head Tapping Screws (Form C)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 7050 Cross Recessed Countersunk Head Tapping Screws (Form C) state?

State the full designation (ISO 7050), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 7050 Cross Recessed Countersunk Head Tapping Screws (Form C) inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ISO 7050 Cross Recessed Countersunk Head Tapping Screws (Form C)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.