Woodruff Key Sizes (Inch Series)

Inch woodruff key ladder by key number (202 through 2825-class): W x B section, bore fit F, key height C max/min and height-above-shaft E — the half-round key size selection table.

Last updated: 2026-11

Request a Quote

Woodruff Key Sizes (Inch Series) in an industrial setting
Illustrative image redrawn from real Woodruff Key Sizes (Inch Series) product references — not a photograph of stocked items.

Specifications

Woodruff keys are the half-round keys that seat in a semicircular shaft slot and level themselves to the hub, and the inch series orders them by key number. The collected chart runs the number ladder from 202 up through the large sections: per key number, the W x B section (width x bore diameter in fractions — 1/16 x 1/4 at key 202 up through 5/16-wide sections on the large numbers), the bore fit F (0.248 at 202 climbing with the bore), key height C max/min pairs (0.109/0.104 upward), and the height-above-shaft E with its max/min split (0.109/0.104 through 1/64 to 3/64 protrusion classes). The key number itself encodes the section — its digits carry the bore and width — which is why the number, not the dimensions, is the ordering identifier. The registered metric identity is DIN 6888; this is the inch ladder that legacy US machinery orders against.

Series / scope Inch woodruff keys by key number, 202 upward through the large sections as tabulated (collected page names no standard — identity from the key-number series; DIN 6888 is the metric identity)
Section W x B Width x bore in fractions: 1/16 x 1/4 (202), 1/16 x 5/16 (202.5), 3/32 x 5/16 (302.5), 1/16 x 3/8 (203)... up the ladder as printed
Bore fit F 0.248 (202), 0.311 (202.5), 0.374 (203), 0.491 (204)... climbing with bore as printed
Key height C Max/min pairs: 0.109/0.104 (202) upward — the half-round height
Height above shaft E Max/min pairs with protrusion class 1/64 to larger steps as printed
Not tabulated Keyseat cutter dimensions (the keyseat identity is a separate table), lengths, material/hardness — per RFQ
Woodruff keys, inch series — key number, W x B, bore fit F, key height, E, by key number (table 1 of 1)Inch. Stacked header rows carried as printed grid rows: the 'Height of Key / E' groups and the C/D max./min. splits. Key numbers follow the inch woodruff key numbering; the collected page prints no standard designation (identity from the key-number series).
Key No.W x BFHeight of KeyE
CD
max.min.max.min.
2021/16 x 1/40.2480.1090.1040.1090.1041/64
202.51/16 x 5/160.3110.1400.1350.1400.1351/64
302.53/32 x 5/160.3110.1400.1350.1400.1351/64
2031/16 x 3/80.3740.1720.1670.1720.1671/64
3033/32 x 3/80.3740.1720.1670.1720.1671/64
4031/8 x 3/80.3740.1720.1670.1720.1671/64
2041/16 x 1/20.4910.2030.1980.1940.1883/64
3043/32 x 1/20.4910.2030.1980.1940.1883/64
4041/8 x 1/20.4910.2030.1980.1940.1883/64
3053/32 x 5/80.6120.2500.2450.2400.2341/16
4051/8 x 5/80.6120.2500.2450.2400.2341/16
5055/32 x 5/80.6120.2500.2450.2400.2341/16
6053/16 x 5/80.6120.2500.2450.2400.2341/16
4061/8 x 3/40.7400.3130.3080.3030.2971/16
5065/32 x 3/40.7400.3130.3080.3030.2971/16
6063/16 x 3/40.7400.3130.3080.3030.2971/16
8061/4 x 3/40.7400.3130.3080.3030.2971/16
5075/32 x 7/80.8660.3750.3700.3650.3591/16
6073/16 x 7/80.8660.3750.3700.3650.3591/16
7077/32 x 7/80.8660.3750.3700.3650.3591/16
8071/4 x 7/80.8660.3750.3700.3650.3591/16
6083/16 x 10.9920.4380.4330.4280.4221/16
7087/32 x 10.9920.4380.4330.4280.4221/16
8081/4 x 10.9920.4380.4330.4280.4221/16
10085/16 x 10.9920.4380.4330.4280.4221/16
12083/8 x 10.9920.4380.4330.4280.4221/16
6093/16 x 1 1/81.1140.4840.4790.4750.4695/64
7097/32 x 1 1/81.1140.4840.4790.4750.4695/64
8091/4 x 1 1/81.1140.4840.4790.4750.4695/64
10095/16 x 1 1/81.1140.4840.4790.4750.4695/64
6103/16 x 1 1/41.2400.5470.5420.5370.5315/64
7107/32 x 1 1/41.2400.5470.5420.5370.5315/64
8101/4 x 1 1/41.2400.5470.5420.5370.5315/64
10105/16 x 1 1/41.2400.5470.5420.5370.5315/64
12103/8 x 1 1/41.2400.5470.5420.5370.5315/64
8111/4 x 1 3/81.3620.5940.5890.5840.5783/32
10115/16 x 1 3/81.3620.5940.5890.5840.5783/32
12113/8 x 1 3/81.3620.5940.5890.5840.5783/32
8121/4 x 1 1/21.4840.6410.6360.6310.6257/64
10125/16 x 1 1/21.4840.6410.6360.6310.6257/64
12123/8 x 1 1/21.4840.6410.6360.6310.6257/64
  • Identity basis: the collected page title is "Woodruff Key Sizes Chart" with no standard number; the key-number ladder matches the inch woodruff key series. DIN 6888 (metric woodruff keys) is the registered metric identity — distinct.

Materials

  • Woodruff key supply is key steel, typically C1215-class cold drawn; the half-round form is milled from the same stock as parallel keys. Selection is by shaft diameter and hub bore from the number ladder — the W x B section must match the keyseat cutter that cut the slot, because a woodruff slot is semicircular and no shimming fixes a depth mismatch. Order by key number ("woodruff key 406") and confirm the section on receipt; the inch series does not interchange with the metric DIN 6888 numbering even where sections nearly coincide

Ordering & documentation

Documents

Shipments of Woodruff Key Sizes (Inch Series) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Woodruff Key Sizes (Inch Series) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Woodruff Key Sizes (Inch Series)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for woodruff key sizes (inch series) is 10,000 pieces (applies to the standard sizes and finishes for woodruff key sizes (inch series); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for woodruff key sizes (inch series) run 3–7 days. Quantities or variants of woodruff key sizes (inch series) outside the standard range are confirmed at quotation.

Storage & shipping

Woodruff Key Sizes (Inch Series) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store woodruff key sizes (inch series) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

What does the key number actually encode?

The section, in the classic inch-woodruff convention: the digits carry the nominal bore and width (a 406 reads as 4/16ths width class over a 6/16ths bore class — the 1/8 x 3/4-class section). That is why maintenance parts systems order by number alone: the number reproduces both dimensions without arithmetic. The chart's W x B and F columns are the verification — match the number to the section before cutting a keyseat, because the cutter and the key must agree exactly and a one-step error in the number is a scrapped shaft at the milling machine, not at the counter.

Why choose a woodruff key over a parallel key?

Self-alignment and depth. The round-bottomed slot lets the key pivot to meet hub keyway misalignment, and the deep semicircular seat resists rolling on inclined shafts — which is why tapered shaft ends and old machine-tool spindles favour them. The costs: the deep slot weakens the shaft more than a parallel seat, load capacity per size is lower, and removal needs the key's protruding height (the E row) to get pliers or a drift under. Use them where the drawing says so; retrofit decisions should weigh the shaft-scarring against the alignment benefit.

What is the MOQ and lead time for Woodruff Key Sizes (Inch Series)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for Woodruff Key Sizes (Inch Series) state?

State the full designation (Woodruff Key Sizes (Inch Series)), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Woodruff Key Sizes (Inch Series) inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your Woodruff Key Sizes (Inch Series)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.