DIN 7516 Cross Recessed Countersunk Head Thread Cutting Screws (Form DE)
Cross recessed countersunk head thread cutting screws per DIN 7516 Form DE — M3 to M8 in the collected table, with cutting flutes from the point and per-size head dimensions for flush seating in a 90° countersink.
Last updated: 2026-11
Specifications
The Form DE thread cutting screw is the cross recessed countersunk member of the thread-cutting family: a 90° conical head that seats flush, a Phillips-style recess that centres a powered driver, and cutting flutes that machine the mating thread from the point upward — cutting rather than forming, for base materials where a thread-forming screw would stall. The collected norm table runs M3 through M8 with head diameter d2 (maximum = nominal and minimum), head height h and the m1/m2 figures printed by the source. At M5 the head measures 9.30 mm across (8.94 mm minimum) at 2.7 mm high; at M8, 15.80 mm across at 4.65 mm high. The flush finish depends on the mating countersink being cut to match — the same seating rule as the DIN 7982 tapping screw — and the hole the flutes cut into should be confirmed against the base material. Its slotted oval-head counterpart is DIN 7513 GE; for joints that sit proud instead of flush, the pan-head Form AE of the same standard covers the drive-side alternative.
| Standard | DIN 7516 Form DE — cross recessed countersunk head thread cutting screws |
|---|---|
| Size range | M3 – M8 (collected table) |
| Dimensions at M3 | d2 (head diameter) max = nominal 5.5 mm (min 5.2 mm); h (head height) max = nominal 1.65 mm; m1 3.2 mm; m2 3 mm |
| Dimensions at M5 | d2 max = nominal 9.30 mm (min 8.94 mm); h max = nominal 2.7 mm; m1 5.2 mm; m2 4.9 mm |
| Dimensions at M8 | d2 max = nominal 15.80 mm (min 15.37 mm); h max = nominal 4.65 mm; m1 8.9 mm; m2 8.8 mm |
| Countersink | Flush seating in a mating 90° countersink — confirm the countersink drawing with the screw |
| Materials | Steel, stainless steel — grade and finish confirmed at quotation (tenant supply range) |
| Nominal thread d | d2 max = nominal size (mm) | d2 min (mm) | h max = nominal size (mm) | m1 (mm) | m2 (mm) |
|---|---|---|---|---|---|
| M3 | 5.5 | 5.2 | 1.65 | 3.2 | 3 |
| M4 | 8.40 | 8.02 | 2.7 | 4.6 | 4.4 |
| M5 | 9.30 | 8.94 | 2.7 | 5.2 | 4.9 |
| M6 | 11.30 | 10.87 | 3.3 | 6.8 | 6.6 |
| M8 | 15.80 | 15.37 | 4.65 | 8.9 | 8.8 |
Materials
- Steel, stainless steel — grade and finish confirmed at quotation (tenant supply range)
Ordering & documentation
Documents
Shipments of DIN 7516 Cross Recessed Countersunk Head Thread Cutting Screws (Form DE) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 7516 Cross Recessed Countersunk Head Thread Cutting Screws (Form DE) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN 7516 Cross Recessed Countersunk Head Thread Cutting Screws (Form DE)), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for din 7516 cross recessed countersunk head thread cutting screws (form de) is 10,000 pieces (applies to the standard sizes and finishes for din 7516 cross recessed countersunk head thread cutting screws (form de); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 7516 cross recessed countersunk head thread cutting screws (form de) run 3–7 days. Quantities or variants of din 7516 cross recessed countersunk head thread cutting screws (form de) outside the standard range are confirmed at quotation.
Storage & shipping
DIN 7516 Cross Recessed Countersunk Head Thread Cutting Screws (Form DE) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 7516 cross recessed countersunk head thread cutting screws (form de) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
DIN 7516 DE or DIN 7513 GE — how do the two thread-cutting head forms differ?
By head form and drive. The Form DE screw is cross recessed and seats flush in a 90° countersink — the powered-driver, flush-finish choice; the Form GE screw is slotted with a raised oval head that sits slightly proud — the hand-service choice that tolerates countersink variation. Both cut their mating thread with flutes from the point, and their collected tables overlap across M3–M8, so the head form, not the thread capability, is the selection decision. Keep the form your drawing prints: the two heads are not interchangeable in the seating.
Why does the table keep the m1/m2 column labels as printed?
The collected source table prints the m1 and m2 columns without a dimension legend, so this page reproduces the values verbatim at every size rather than assigning them a meaning the source does not state. Every other column (head diameter d2 maximum/minimum and head height h) is labelled by the source and is quoted as collected. If your drawing keys a dimension to m1 or m2, confirm the interpretation against the current standard edition at quotation.
What is the MOQ and lead time for these thread cutting screws?
Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.
What should an RFQ for thread cutting screws state?
State the standard designation and form letter (for example DIN 7513 GE or DIN 7516 DE), thread size and pitch, length, material and finish, the base-material thickness and hardness the screw must cut into, required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN 7516 Cross Recessed Countersunk Head Thread Cutting Screws (Form DE) inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your DIN 7516 Cross Recessed Countersunk Head Thread Cutting Screws (Form DE)
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support