DIN 968 Tapping Screws, Cross Recessed Pan Head with Collar

DIN 968 cross recessed pan head tapping screws with washer collar, ST 2.9 to ST 6.3: collar and head geometry, cross recess data and the commercial length ladder to 50 mm.

Last updated: 2026-11

Request a Quote

DIN 968 Tapping Screws, Cross Recessed Pan Head with Collar in an industrial setting
Illustrative image redrawn from real DIN 968 Tapping Screws, Cross Recessed Pan Head with Collar product references — not a photograph of stocked items.

Specifications

DIN 968 adds the integral washer collar to the cross recessed pan head: the 05/2008-edition table runs ST 2.9 to ST 6.3 with thread pitch a, head height k nom=max (4.55 at ST6.3), head-and-collar diameter dK nom=max (14.5 at ST6.3), collar edge c max and the collar thickness a mx, plus the cross recess number (3 at ST6.3) with its depth columns (7.1/6.7). The commercial length ladder runs 4.5 to 50 mm with the mass table. The collar is the point of the standard: it spreads the clamp over a larger bearing circle without a separate washer, seals the hole edge against weather on outdoor sheet, and keeps the driven head from burying in soft or oversize holes — the reason roofing, cladding and appliance lines standardized on it. The two cross-recess depth columns (H and Z driver data as the source prints them) are the assembly-quality check for production driving.

Standard / scope DIN 968 tapping screws, cross recessed pan head with collar — ST 2.9 to ST 6.3, edition 05/2008 (supersedes 12/2002)
Head + collar k nom=max 4.55 at ST 6.3; dK nom=max (head over collar) 14.5; collar edge c max 1.8; collar thickness a mx 1.8
Cross recess Recess number per size (3 at ST 6.3) with the two printed depth columns 7.1/6.7 — driver penetration data
Commercial lengths l Ladder 4.5 to 50 mm; approximate mass per 1000 pcs (ρ=7,85 kg/dm³) tabulated
Not tabulated Case hardness, EPDM sealing variants, finish — per RFQ
DIN 968 tapping screws, cross recessed pan head with collar — 05/2008 edition, head and collar geometry by ST sizeDimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
thread sizeak nom=maxdK nom=max.c maxa mxcross recess nr.Cross recessCross recess
thread sizeak nom=maxdK nom=max.c maxa mxcross recess nr.Type H m referenceType Z m reference
ST 2.91.12.357.50.81.1132.9
ST 3.51.32.690.91.324.23.9
ST 3.91.32.8101.11.324.44.1
ST 4.21.43.05101.11.424.64.3
ST 4.81.63.5511.51.351.6254.7
ST 5.51.83.8131.61.836.56.2
ST 6.31.84.5514.51.81.837.16.7
  • Source spanning title row carried verbatim: "Dimensions in mm - source DIN 968".
  • Edition row carried from the source grid: "Publication date 05/2008 - Supersedes DIN 968 12/2002".
DIN 968 2008 — approximate mass, kg per 1000 pcs (ρ=7,85 kg/dm³), commercial lengthsDimensions in mm unless stated; cell values, symbols and decimal marks exactly as printed on the source page. Column 1 is the row label.
thread sizeST2.9ST3.5ST4.2ST4.8ST5.5ST6.3
nominal length l
4.5
6.50.602
9.50.7101.041.552.28
130.8361.221.792.613.774.9
160.9441.3722.894.155.44
191.051.522.213.174.535.98
221.672.423.454.916.52
251.832.633.735.297.06
323.124.396.28.32
384.956.989.4
45
50
  • Source spanning title row carried verbatim: "DIN 968-2008 - Approximate mass, in kg x1000 pcs, (ρ=7,85 kg/dm 3 ) - commercial lengths".
  • Row-width mismatch in the source grid: source rows carry differing non-empty cell counts (7/1/2/5) — grid padded empty; per-row pre-pad widths: 7,7,1,1,2,5,7,7,7,7,7,7,7,1,1.

Materials

  • Case-hardened steel, zinc-plated for general duty and mechanically galvanized or coated for outdoor cladding; A2/A4 stainless for coastal and food-plant sheet. If the joint needs a sealing washer under the collar, say so — sealing variants with bonded EPDM are quoted against the same geometry with the washer added, and the collar thickness a mx in the grid is the stack-up input

Ordering & documentation

Documents

Shipments of DIN 968 Tapping Screws, Cross Recessed Pan Head with Collar are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 968 Tapping Screws, Cross Recessed Pan Head with Collar orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 968 Tapping Screws, Cross Recessed Pan Head with Collar), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 968 tapping screws, cross recessed pan head with collar is 10,000 pieces (applies to the standard sizes and finishes for din 968 tapping screws, cross recessed pan head with collar; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 968 tapping screws, cross recessed pan head with collar run 3–7 days. Quantities or variants of din 968 tapping screws, cross recessed pan head with collar outside the standard range are confirmed at quotation.

Storage & shipping

DIN 968 Tapping Screws, Cross Recessed Pan Head with Collar are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 968 tapping screws, cross recessed pan head with collar dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Does the integral collar really replace a separate washer?

For load spread and burial resistance, mostly yes: the collar is part of the hardened head, cannot be forgotten at assembly, and its dK 14.5 at ST 6.3 gives the bearing circle a loose washer would, at every screw on the line. What it does not give is sealing and adjustability — a bonded washer compresses against an uneven surface and weathers the hole, and you can swap washer types per joint. So: internal or dry assemblies run DIN 968 alone; outdoor through-fixing into cladding usually wants the sealing-washer variant, which we quote on the same collar geometry. Check the hole: the collar also covers slotted or oversize holes up to roughly its own diameter, a common reason the standard gets specified for pre-punched sheet.

Why does the table carry two cross recess depth columns?

They are the penetration data for the two recess depth tolerances the production drive checks against: minimum and maximum recess depth per size (7.1/6.7 at ST 6.3 as printed). Too shallow and the driver cambs out mid-tightening (the classic under-torque on automated lines); too deep and the driver bottoms before head seat, stripping the recess. Production engineering uses the pair to set driver height and reject screws outside the band; maintenance just needs the right driver size — recess number 3 at ST 6.3 per the grid. If you drive at rate, send the target torque and we supply against the recess depth band the line is set to.

What is the MOQ and lead time for DIN 968 Tapping Screws, Cross Recessed Pan Head with Collar?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 968 Tapping Screws, Cross Recessed Pan Head with Collar state?

State the full designation (DIN 968 Tapping Screws, Cross Recessed Pan Head with Collar), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 968 Tapping Screws, Cross Recessed Pan Head with Collar inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your DIN 968 Tapping Screws, Cross Recessed Pan Head with Collar
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.