DIN / ISO Specifications List
The collected source's specifications index: DIN standard numbers grouped by number range (0-100 through 9001-10000) plus the ISO block (2338, 7379, 7380) — the catalogue map of which standards have documented technical pages, useful as a coverage checklist when a drawing cites a DIN number.
Last updated: 2026-11
Specifications
Fastener drawings cite standard numbers, and the first lookup question is whether a technical reference exists for that number at all. This index is the collected source's own specifications list: DIN numbers grouped by range — from DIN 1, 7 and 84-97 in the low hundreds through the 401-480 bolt-and-washer block, the 525-582 and 603-661 stud/eye/rivet blocks, the dense 901-1000 nut-and-screw block (906 through 988), the 1001-2000 range carrying the clevis-pin and washers-for-pins families (1440, 1441, 1473-1481), the 2093/2339 disc-spring and taper-pin block, the 6319-6927 block (spherical washers through structural flange nuts) and the 7343-7991 block (spring pins, thread inserts, socket screws) — with ISO 2338, 7379 and 7380 listed separately. Use it as a coverage map, not a standards encyclopaedia: an entry means the collected source documents that designation; a gap (201-300, 3001-6000, 8001-9000 print empty) means no documented page there, and a number absent from a populated range is likewise undocumented — quote those per RFQ against the governing standard. For resolving a withdrawn DIN number to its current replacement, the crossover chart page is the companion to this index.
| DIN ranges covered | 0-100: 1 7 84 85 93 94 95 96 97; 101-200: 125 126 127 128 137A 137B 186 188 193 196; 201-300: (empty); 301-400: 315 316; 401-500: 404 427 431 432 433 434 435 436 439 444 462 463 464 466 467 470 471 472 478 479 480; 501-600: 525 529 551 553 555 557 558 562 571 580 582; 601-700: 603 604 605 607 608 609 610 653 660 661; 701-800: 705; 801-900: 835 |
|---|---|
| DIN ranges covered (cont.) | 901-1000: 906 908 910 911 912 913 914 915 916 917 920 923 927 928 929 931 933 934 935 936 937 939 960 961 963 964 965 966 980 982 985 986 988; 1001-2000: 1052 1440 1441 1473 1475 1476 1477 1480 1481 1587 1804; 2001-3000: 2093 2339; 3001-6000: (empty); 6001-7000: 6319C 6319D 6325 6334 6796 6797 6798 6799 6885 6888 6911 6912 6914 6915 6916 6921 6923 6926 6927; 7001-8000: 7343 7349 7978 7979D 7980 7981 7982 7983 7984 7985 7989 7991; 8001-9000: (empty); 9001-10000: 9021 |
| ISO block | 1000-9000 range row lists ISO 2338 (parallel dowel pins), 7379 (shoulder screws), 7380 (button head screws) as printed |
| Verbatim quirks (flagged) | Empty ranges (201-300, 3001-6000, 8001-9000) print as empty rows — carried as printed, not dropped |
| Reading note | An entry documents that designation on the collected source only; it is not a claim that other standards do not exist, nor that listed editions are current — quote unlisted or superseded numbers per RFQ |
| DIN number range | DIN standards documented |
|---|---|
| 0 – 100 | 1 7 84 85 93 94 95 96 97 |
| 101 – 200 | 125 126 127 128 137A 137B 186 188 193 196 |
| 201 – 300 | |
| 301 – 400 | 315 316 |
| 401 – 500 | 404 427 431 432 433 434 435 436 439 444 462 463 464 466 467 470 471 472 478 479 480 |
| 501 – 600 | 525 529 551 553 555 557 558 562 571 580 582 |
| 601 – 700 | 603 604 605 607 608 609 610 653 660 661 |
| 701 – 800 | 705 |
| 801 – 900 | 835 |
| 901 – 1000 | 906 908 910 911 912 913 914 915 916 917 920 923 927 928 929 931 933 934 935 936 937 939 960 961 963 964 965 966 980 982 985 986 988 |
| 1001 – 2000 | 1052 1440 1441 1473 1475 1476 1477 1480 1481 1587 1804 |
| 2001 – 3000 | 2093 2339 |
| 3001 – 4000 | |
| 4001 – 5000 | |
| 5001 – 6000 | |
| 6001 – 7000 | 6319C 6319D 6325 6334 6796 6797 6798 6799 6885 6888 6911 6912 6914 6915 6916 6921 6923 6926 6927 |
| 7001 – 8000 | 7343 7349 7978 7979D 7980 7981 7982 7983 7984 7985 7989 7991 |
| 8001 – 9000 | |
| 9001 – 10000 | 9021 |
| ISO number range | ISO standards documented |
|---|---|
| 1000 – 9000 | 2338 7379 7380 |
Materials
- A specification number is not a material callout: when you locate your DIN number here, carry the property class / stainless grade separately on the RFQ — the documented pages tabulate dimensions, and material requirements ride the order
Ordering & documentation
Documents
Shipments of DIN / ISO Specifications List are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN / ISO Specifications List orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (DIN / ISO Specifications List), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for din / iso specifications list is 10,000 pieces (applies to the standard sizes and finishes for din / iso specifications list; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din / iso specifications list run 3–7 days. Quantities or variants of din / iso specifications list outside the standard range are confirmed at quotation.
Storage & shipping
DIN / ISO Specifications List are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din / iso specifications list dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
My drawing cites a DIN number that does not appear in this index. Does that mean the part is unavailable?
No — it means the collected source documents no technical page for that number. The index is a coverage list of one supplier's documentation, and its gaps are explicit: whole ranges (201-300, 3001-6000, 8001-9000) print empty, and even populated ranges list only some numbers. Standards exist far beyond any single index — the practical path for an undocumented number is threefold: check whether the drawing's part crosses to a current designation (the DIN/ISO/EN crossover chart handles withdrawn numbers), quote the part per its governing standard with dimensions from the drawing itself, or send the RFQ with the drawing number attached and let sourcing confirm against current editions. What the index is genuinely good for is the reverse direction: before you assume a bespoke part, check whether the number is documented — a DIN 1481 or DIN 6799 in the list is a catalogued, dimensioned, supply-ready item, and that discovery saves a custom quote.
Why do some entries carry letter suffixes like 137A, 137B, 6319C/D or 7979D?
Because several DIN families split by form, and the suffix is the form designator, not a revision: DIN 137 form A (helical spring washers) and form B (wave washers) are different parts; DIN 6319 C and D are the spherical-washer seat variants (C with a flat nose seating washer, D recessed); DIN 7979 D is the internal-thread pull-out dowel form. The index carries the suffixes verbatim because treating "DIN 137" as one item would merge two distinct geometries into one lookup. The same discipline applies when you RFQ: include the form letter exactly as the drawing prints it — a "DIN 6319" callout without the C/D form is ambiguous at quotation, and resolving it after delivery is an expensive way to fix a one-character omission. Where the collected source documents only one form of a split standard, the suffix tells you which; the un-suffixed entries are the standards documented without form splits.
What is the MOQ and lead time for DIN / ISO Specifications List?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for DIN / ISO Specifications List state?
State the full designation (DIN / ISO Specifications List), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your DIN / ISO Specifications List inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your DIN / ISO Specifications List
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support