ANSI B18.3 Flat Socket Head Cap Screws

ANSI/ASME B18.3 flat socket head cap screws, #0 to 1-1/2 in — the 82° countersunk inch hex socket screw for flush or sub-flush seating — with the collected 23-size table: head diameter and reference height, socket size, minimum full-thread length and head angle.

Last updated: 2026-11

Request a Quote

ANSI B18.3 Flat Socket Head Cap Screws in an industrial setting
Illustrative image redrawn from real ANSI B18.3 Flat Socket Head Cap Screws product references — not a photograph of stocked items.

Specifications

The flat socket head cap screw is the countersunk member of the B18.3 hex socket family: an 82° conical head that seats flush or marginally below flush in a countersunk hole, driven by a hex socket so the flush result carries real torque without a slot or recess that cams out. It is the head for rotating parts it must not proud-stand on, gauging surfaces, and any assembly where the screw is the topmost feature. The collected table runs 23 sizes from #0 to 1-1/2 in and tabulates per size: nominal diameter with UNC/UNF/UNEF threads per inch, shank d s limits, head diameter d k with max/min bands, the head height k given as a reference value (countersunk heads locate by cone, not by height), hex socket nominal size s with minimum depth t, the minimum full-thread length b that scales with diameter, and the head angle α held to ±2° around 82°. The angle matters: an 82° head dropped into a 90° metric countersink seats on the wrong cone and loses both flushness and bearing — inch and metric countersunk hardware do not interchange. ISO 10642 / DIN 7991 (90°) metric flat socket heads are covered separately on this site.

Standard ANSI/ASME B18.3 — flat socket head cap screws, 82° countersunk head (inch series)
Series #0 – 1-1/2 in (23 sizes tabulated); UNC/UNF, UNEF on selected sizes
Tabulated geometry Per size: nominal diameter d, threads per inch by series, shank d s (max / min), head d k (max / min), head height k (Ref), socket s, socket depth t (min), full thread b (min), head angle α 82° ±2°
At 1/4 UNC 20 / UNF 28 / UNEF 32; head d k 0.531 / 0.480 in; height k 0.161 in Ref; socket s 5/32 in, depth t min 0.111 in; thread b min 1 in; angle 82° ±2°
At 1/2 UNC 13 / UNF 20 / UNEF 28; head d k 0.938 / 0.872 in; height k 0.251 in Ref; socket s 5/16 in, depth t min 0.172 in; thread b min 1.5 in; angle 82° ±2°
At 1 UNC 8 / UNF 12 / UNEF 20; head d k 1.938 / 1.841 in; height k 0.540 in Ref; socket s 5/8 in, depth t min 0.297 in; thread b min 2.5 in; angle 82° ±2°
Materials / strength Not tabulated by the collected specification — per RFQ (property class / hardness and finish per drawing callout)
Flat head socket screws (82° countersunk) — head dimensions with UNC/UNF thread pairs (inch)Head diameter as sharp-max / absolute-min pair in inches; head height is a reference figure; hex key nominal; key engagement minimum. The TPI column prints the UNC/UNF pair available per size.
Nominal ThreadUNC / UNF (TPI)Head Dia. (A) Sharp Max / Abs MinHead Height Ref (H)Hex Key (J)Key Engagement Min (T)
#440 / 480.255 / 0.2180.0831/160.055
#540 / 440.281 / 0.2400.0905/640.061
#632 / 400.307 / 0.2630.0975/640.066
#832 / 360.359 / 0.3110.1123/320.076
#1024 / 320.411 / 0.3590.1271/80.087
1/4 in20 / 280.531 / 0.4800.1615/320.111
5/16 in18 / 240.656 / 0.6000.1983/160.135
3/8 in16 / 240.781 / 0.7200.2347/320.159
1/2 in13 / 200.938 / 0.8720.2515/160.172
5/8 in11 / 181.188 / 1.1120.3243/80.220
3/4 in10 / 161.438 / 1.3550.3961/20.220
ASME B18.3 flat head socket cap screws — full dimension and property grid (inch, alloy)Dimensions in inches; strengths in pounds; seating torques in inch-pounds. The source grid merges its header across three rows; the 17 value columns are reproduced in the exact printed order — read the header list in the reading note alongside each row rather than relying on column names alone.
SizeBody Dia. (D) MaxBody Dia. (D) MinHead Dia. (A) Sharp MaxHead Dia. (A) Abs MinHead Height (H) RefProtrusion Gage (G) MaxProtrusion Gage (G) MinProtrusion (P) RefProtrusion (P) MaxHex Socket (J) NomKey Engagement (T) MinFillet (F) MaxTensile (lbs min)Shear UNRC (lbs min)Shear UNRF (lbs min)Torque UNRC (in.-lbs)Torque UNRF (in.-lbs)
40.11200.10750.2550.2180.0830.1720.1740.0490.0361/160.0550.136900-9408.-
50.12500.12020.2810.2400.0900.1960.1950.0510.0375/640.0610.1531,185-1,18012.-
60.13800.13290.3070.2630.0970.2200.2190.0520.0375/640.0660.1681,350-1,44015.-
80.16400.15850.3590.3110.1120.2670.2660.0550.0393/320.0760.1942,085-2,03030.-
100.19000.18400.4110.3590.1270.3130.3120.0580.0411/80.0870.2202,6102,6102,72040.45.
1/40.25000.24350.5310.4800.1610.4240.4230.0640.0435/320.1110.2804,7504,7504,710100.110.
5/160.31250.30530.6560.6000.1980.5390.5380.0700.0473/160.1350.3437,8007,8007,360200.220.
3/80.37500.36780.7810.7200.2340.6530.6520.0760.0507/320.1590.40511,60011,60010,600350.400.
7/160.43750.42940.8440.7810.2340.6900.6890.0920.0631/40.1590.46815,90015,90014,400560.-
1/20.50000.49190.9380.8720.2510.7390.7380.1190.0875/160.1720.53021,20021,20018,850850.1,000.
5/80.62500.6161.1881.1120.3240.9620.9610.1350.0963/80.2200.65533,80033,80029,4501,700-
3/40.75000.74061.4381.3550.3961.1861.1850.1500.1051/20.2200.78050,00050,00042,4003,000-
  • Row 1 (4): The source merges its header across three rowspan rows; the 17 printed values are kept in exact source order (column count per row verified constant across the ladder). Strength/torque pairing: tensile, UNRC/UNRF shear, UNRC/UNRF torque — "-" where the source prints none.
ASME B18.3 flat head socket cap screws — tolerance on length (inch)Negative tolerance applied to the stated nominal screw length.
Thread Length GroupUp to 1 in.Over 1 in. to 2-1/2 in.Over 2-1/2 in. to 6 in.
0 thru 3/8 (Inclusive)-.03-.04-.06
7/16 thru 3/4 (Inclusive)-.03-.06-.08

Materials

  • Material, hardness and finish specified per RFQ — the collected specification table covers geometry only

Ordering & documentation

Documents

Shipments of ANSI B18.3 Flat Socket Head Cap Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ANSI B18.3 Flat Socket Head Cap Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ANSI B18.3 Flat Socket Head Cap Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for ansi b18.3 flat socket head cap screws is 10,000 pieces (applies to the standard sizes and finishes for ansi b18.3 flat socket head cap screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for ansi b18.3 flat socket head cap screws run 3–7 days. Quantities or variants of ansi b18.3 flat socket head cap screws outside the standard range are confirmed at quotation.

Storage & shipping

ANSI B18.3 Flat Socket Head Cap Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store ansi b18.3 flat socket head cap screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why is the head height listed only as a reference, and why does the 82° angle matter so much?

A countersunk head does not locate the way a cap head does. Its position is set by the cone engaging the countersink, so the height above the surface falls out of the cone fit rather than being a controlled feature — which is why the table marks k as Reference. The controlled feature is the angle, held to 82° ±2°, and that is where interchange ends: inch-series countersunk holes are cut 82°, metric (ISO 10642 / DIN 7991) hardware uses 90°. Seat an 82° head in a 90° countersink and the cone touches only near its largest diameter — the head sits slightly proud, rocks under load, and the bearing circle that should spread the clamping force shrinks to a ring. So the practical rule is absolute: match the head angle to the cutter that made the seat, and treat head height as the consequence, not the check. Verify replacements by angle and head diameter d k together.

What is the MOQ and lead time for these screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for ANSI B18.3 Flat Socket Head Cap Screws?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ANSI B18.3 Flat Socket Head Cap Screws state?

State the full designation (ANSI/ASME B18.3), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ANSI B18.3 Flat Socket Head Cap Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ANSI B18.3 Flat Socket Head Cap Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.