Thread Measuring Wires — Best-Size Wire Diameters for ISO Metric M Threads (0.2 – 8 mm pitch)

Best-size wire diameters for measuring ISO general purpose metric screw thread (M) pitch diameters by the three-wire method, per ISO 16239 — one wire diameter per thread pitch from 0.2 to 8 mm, transcribed row-for-row from the collected chart.

Last updated: 2026-11

Request a Quote

Thread Measuring Wires — Best-Size Wire Diameters for ISO Metric M Threads (0.2 – 8 mm pitch) in an industrial setting
Illustrative image redrawn from real Thread Measuring Wires — Best-Size Wire Diameters for ISO Metric M Threads (0.2 – 8 mm pitch) product references — not a photograph of stocked items.

Specifications

The three-wire method measures pitch diameter with three hardened wires of a calculated "best size" laid in the thread flanks and a micrometer over the outside of the pair — the only pitch-diameter check many machine shops run on ground threads. Best size is not arbitrary: for a symmetric thread the wire should contact the flanks at the pitch line, which puts its diameter at P/(2·cos(α/2)) — for the metric 60° form, about 0.577× the pitch, and the collected chart tabulates the ISO 16239 allocation directly: a 0.5 mm pitch takes 0.289 mm wires, 1.0 mm takes 0.577, 1.5 mm takes 0.866, up to 8 mm pitch on 4.619 mm wires. Using best-size wires cancels the flank-angle error from the measurement, which is why the tabulated pair matters — a wire of convenient but wrong size drags the flank angle into the pitch-diameter reading and the measurement lies. The chart runs the full metric general-purpose pitch series 0.2–8 mm, matching the M-thread pitches on the site's thread dimension pages; wire sets themselves are sold as matched triples per pitch. Wire tolerance class and calibration practice are not tabulated by the collected chart — per RFQ.

Standard ISO 16239 — metric series wires for measuring screw threads; three-wire pitch-diameter measurement of ISO general purpose M threads
Size range Thread pitches 0.2 – 8 mm, 13 wire/pitch pairs printed (two pairs per source row)
Best-size rule Symmetric threads: wire diameter = P/(2 cos α/2), P = pitch, α/2 = flank angle (source note) — the 60° metric form gives ≈0.577 × pitch
Example pairings (mm) Pitch 0.5 → wires 0.289; pitch 1.0 → 0.577; pitch 1.5 → 0.866; pitch 2.0 → 1.155; pitch 4.0 → 2.309; pitch 8.0 → 4.619
Wire tolerance / calibration Not tabulated by the collected chart — per RFQ (order matched triples per pitch; state wire class and calibration needs)
Best-size wire diameters for ISO general purpose metric screw threads (M), per ISO 16239All dimensions in millimetres. Measurement of pitch diameters per ISO 16239. Source note: for symmetric threads, the diameter of a best-size wire equals P/(2 cos α/2), where P is the pitch and α/2 the flank angle.
Nominal diameter of wires (mm)Pitch P (mm)Nominal diameter of wires (mm)Pitch P (mm)
0.1150.20.8661.5
0.1440.251.0101.75
0.1730.31.1552
0.2020.351.4432.5
0.2310.41.7323
0.2600.452.0213.5
0.2890.52.3094
0.3460.62.5984.5
0.4040.72.8875
0.4330.753.1755.5
0.4620.83.4646
0.57714.6198
0.7221.25--
  • Source prints a placeholder dash pair ("-" / "-") in the second wire/pitch column — no additional pair exists; reproduced as printed.
  • The source table prints two wire/pitch pairs per row; reproduced as printed.

Materials

  • Measuring wires are through-hardened steel; specify wire set class and calibration certificate requirements at RFQ

Ordering & documentation

Documents

Shipments of Thread Measuring Wires — Best-Size Wire Diameters for ISO Metric M Threads (0.2 – 8 mm pitch) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Thread Measuring Wires — Best-Size Wire Diameters for ISO Metric M Threads (0.2 – 8 mm pitch) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Thread Measuring Wires — Best-Size Wire Diameters for ISO Metric M Threads (0.2 – 8 mm pitch)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for thread measuring wires — best-size wire diameters for iso metric m threads (0.2 – 8 mm pitch) is 10,000 pieces (applies to the standard sizes and finishes for thread measuring wires — best-size wire diameters for iso metric m threads (0.2 – 8 mm pitch); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for thread measuring wires — best-size wire diameters for iso metric m threads (0.2 – 8 mm pitch) run 3–7 days. Quantities or variants of thread measuring wires — best-size wire diameters for iso metric m threads (0.2 – 8 mm pitch) outside the standard range are confirmed at quotation.

Storage & shipping

Thread Measuring Wires — Best-Size Wire Diameters for ISO Metric M Threads (0.2 – 8 mm pitch) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store thread measuring wires — best-size wire diameters for iso metric m threads (0.2 – 8 mm pitch) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Why must the wire size match the pitch, and how do I use the three-wire reading once I have it?

Because the wire diameter enters the measurement arithmetic directly. Three wires sit in the thread flanks and the micrometer reads over two of them; the pitch diameter is backed out of that reading minus a geometry term built from the pitch and the wire diameter. When the wire is best size — contacting the flanks exactly at the pitch line — the flank angle error cancels and the arithmetic is simple; when the wire is oversize or undersize, the contact point climbs or drops the flank, the flank half-angle leaks into the result, and a perfectly good thread can read out of tolerance (or a bad one pass). That is what the collected chart pins down: per ISO 16239, each metric pitch from 0.2 to 8 mm has one correct wire — 0.5 mm pitch takes 0.289 mm wires, 1.25 mm takes 0.722, and so on; the source also prints the general rule (P/(2 cos α/2)) so a non-tabulated symmetric form can be derived. In practice: measure over the three wires, subtract the constant for the pitch/wire pair, and compare against the pitch-diameter limits of the thread standard (see this catalog's metric thread dimension pages for the 6H internal limits). Keep wires clean and matched — one worn wire skews the whole reading. Wire tolerance class, calibration certificates and measurement uncertainty budgets are beyond the chart — per RFQ.

What is the MOQ and lead time for threaded parts and gaging hardware on this standard?

The minimum order quantity is 10,000 pieces. Stock items ship in 3–7 days; non-stock items are confirmed at quotation. Confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for Thread Measuring Wires — Best-Size Wire Diameters for ISO Metric M Threads (0.2 – 8 mm pitch)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for Thread Measuring Wires — Best-Size Wire Diameters for ISO Metric M Threads (0.2 – 8 mm pitch) state?

State the full designation (ISO 16239), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Thread Measuring Wires — Best-Size Wire Diameters for ISO Metric M Threads (0.2 – 8 mm pitch) inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your Thread Measuring Wires — Best-Size Wire Diameters for ISO Metric M Threads (0.2 – 8 mm pitch)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.