DIN 7500 ME Flat Countersunk Head Thread Forming Screws

DIN 7500 ME flat countersunk head thread forming screws: the trilobular rolling thread with a head that seats flush. The collected spec sheet tables the six-lobe version M2 to M8 and the Pozidriv variant M2.5 to M6 — the forming screw for panels, covers and anywhere the head must not stand proud.

Last updated: 2026-11

Request a Quote

DIN 7500 ME Flat Countersunk Head Thread Forming Screws in an industrial setting
Illustrative image redrawn from real DIN 7500 ME Flat Countersunk Head Thread Forming Screws product references — not a photograph of stocked items.

Specifications

The ME variant takes the DIN 7500 rolling thread and puts it under a flat countersunk head that aligns level with the surface — useful where a protruding head would catch, gather contaminants or break a flush panel line. The collected spec sheet tables both drive versions: the six-lobe head runs M2 to M8 (head diameter 3.8 to 14.5 mm) and the Pozidriv variant M2.5 to M6. Thread geometry, performance and pilot-hole guidance are shared with the DIN 7500-1 rolling-screw page. The collected sheet does not state the countersink angle, so confirm the mating countersink against a sample before locking the hole specification.

Standard DIN 7500 ME — flat countersunk head thread forming screw
Size range M2 – M8 (six-lobe table); Pozidriv variant table M2.5 – M6
Head at M2 Head diameter d2 max 3.8 mm; head height k max 1.2 mm; drive depth t max 0.7 mm; socket depth A 1.8 mm; drive T6
Head at M4 Head diameter d2 max 7.5 mm; head height k max 2.2 mm; drive depth t max 1.4 mm; socket depth A 3.9 mm; drive T20
Head at M8 Head diameter d2 max 14.5 mm; head height k max 4 mm; drive depth t max 3.3 mm; socket depth A 6.8 mm; drive T40
Six-lobe drive map T6 (M2), T8 (M2.5), T10 (M3), T20 (M4), T25 (M5), T30 (M6), T40 (M8)
Pozidriv variant M2.5–M6: head diameter 4.7–11 mm, head height 1.5–3 mm, recess depth m~ 2.5–6.1 mm, drive PZ1–PZ3
Countersink angle Not stated in the collected sheet — confirm against a sample

Materials

  • Case-hardened steel
  • A2 stainless steel

Ordering & documentation

Documents

Shipments of DIN 7500 ME Flat Countersunk Head Thread Forming Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 7500 ME Flat Countersunk Head Thread Forming Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 7500 ME Flat Countersunk Head Thread Forming Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 7500 me flat countersunk head thread forming screws is 10,000 pieces (applies to the standard sizes and finishes for din 7500 me flat countersunk head thread forming screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 7500 me flat countersunk head thread forming screws run 3–7 days. Quantities or variants of din 7500 me flat countersunk head thread forming screws outside the standard range are confirmed at quotation.

Storage & shipping

DIN 7500 ME Flat Countersunk Head Thread Forming Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 7500 me flat countersunk head thread forming screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

DIN 7500 ME and the DIN 965-style countersunk machine screw — same countersink?

The collected DIN 7500 sheet does not print the countersink angle, so this page does not claim one. Qualify the head against the mating countersink with a sample: the ME head heights in the table (k max 1.2 mm at M2 up to 4 mm at M8) are the figures to check for flushness in your sheet thickness. Once qualified, the same pilot-hole rules as the rest of the DIN 7500 family apply.

How large does the ME series run?

The six-lobe table runs to M8 with a 14.5 mm head diameter — the widest countersunk forming head in the collected DIN 7500 sheets. The Pozidriv variant is tabled from M2.5 to M6. Availability follows the stock programme: stocked diameters and lengths ship from stock, larger or off-list lengths are quoted.

What is the MOQ and lead time for these thread forming screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these thread forming screws state?

State the standard designation (for example DIN 7500 CE or DIN 7500 ME), the head form and drive, thread size and pitch, length, material and grade (case-hardened steel or A2/A4 stainless), finish, pilot-hole or sheet thickness if you need a hole-size recommendation, required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 7500 ME Flat Countersunk Head Thread Forming Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your DIN 7500 ME Flat Countersunk Head Thread Forming Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.