ASME B18.6.3 UNC Slotted 82° Flat Countersunk Machine Screws

Slotted 82° flat countersunk head machine screws per ASME B18.6.3, UNC thread — gauge 0000 through 3/4 in basic diameter in steel or stainless steel. The flush inch-series head: seats into an 82° countersink, driven by a flat blade, undercut at short lengths.

Last updated: 2026-11

Request a Quote

ASME B18.6.3 UNC Slotted 82° Flat Countersunk Machine Screws in an industrial setting
Illustrative image redrawn from real ASME B18.6.3 UNC Slotted 82° Flat Countersunk Machine Screws product references — not a photograph of stocked items.

Specifications

The flat countersunk machine screw is the flush head of the inch series: a conical head seating in an 82° countersink — the inch-series angle, against the 90° countersink of the metric DIN 963/ISO 2009 line — leaving a slotted head flush with or just below the surface. The collected ASME B18.6.3 table covers gauge 0000 through 3/4 in on UNC threads, and carries a detail metric tables rarely show: the undercut column — the length at or below which the head is supplied undercut (threading carried up under the head), 3/16 in at #4, 5/16 in at #10, 9/16 in at 3/8. At #10 the head seats at 0.362 in maximum diameter with a 0.116 in head height; at 1/4, 0.477 in by 0.153 in. The metric counterparts most drawings pair it with are DIN 963 (slotted countersunk, 90°) and DIN 965 (cross recessed, 90°) — the countersink angle, not the head form, is what changes between the series, so inch and metric countersunk screws are not seat-interchangeable.

Standard ASME B18.6.3 — slotted flat countersunk head machine screws, 82° countersink, UNC thread
Size range Gauge 0000 – 3/4 in basic diameter, UNC threads per inch
Dimensions at #4 (#4-40) dk (head diameter) max 0.212 in (min 0.191 in); k (head height) max 0.067 in; slot width n 0.039–0.031 in; slot depth t 0.030–0.020 in; lengths 3/16 in and shorter undercut
Dimensions at #10 (#10-24) dk max 0.362 in (min 0.333 in); k max 0.116 in; slot width n 0.060–0.050 in; slot depth t 0.053–0.034 in; lengths 5/16 in and shorter undercut
Dimensions at 1/4 (1/4-20) dk max 0.477 in (min 0.442 in); k max 0.153 in; slot width n 0.075–0.064 in; slot depth t 0.070–0.046 in; lengths 7/16 in and shorter undercut
Dimensions at 3/8 (3/8-16) dk max 0.717 in (min 0.670 in); k max 0.230 in; slot width n 0.094–0.081 in; slot depth t 0.106–0.070 in; lengths 9/16 in and shorter undercut
Materials Steel, stainless steel — grade and finish confirmed at quotation (tenant supply range)

Materials

  • Steel
  • Stainless steel

Ordering & documentation

Documents

Shipments of ASME B18.6.3 UNC Slotted 82° Flat Countersunk Machine Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ASME B18.6.3 UNC Slotted 82° Flat Countersunk Machine Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ASME B18.6.3 UNC Slotted 82° Flat Countersunk Machine Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for asme b18.6.3 unc slotted 82° flat countersunk machine screws is 10,000 pieces (applies to the standard sizes and finishes for asme b18.6.3 unc slotted 82° flat countersunk machine screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for asme b18.6.3 unc slotted 82° flat countersunk machine screws run 3–7 days. Quantities or variants of asme b18.6.3 unc slotted 82° flat countersunk machine screws outside the standard range are confirmed at quotation.

Storage & shipping

ASME B18.6.3 UNC Slotted 82° Flat Countersunk Machine Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store asme b18.6.3 unc slotted 82° flat countersunk machine screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

82° or 90° countersink — why does the angle matter across series?

Inch-series flat head machine screws seat in an 82° countersink; metric flat head screws per DIN 963/ISO 2009 seat in 90°. The head forms look alike, but the cones are not interchangeable — an 82° head in a 90° seat touches only at its outer edge and sits proud or rocks, and the reverse gouges the seat. Match the countersink tool to the screw series, and state the series explicitly when a drawing mixes inch hardware with metric tooling. The ASME B18.6.3 countersunk head designations and the 82° angle go together throughout the standard.

What does the undercut column in the table mean?

For each gauge size the ASME B18.6.3 countersunk table lists the length at or below which the screw is supplied undercut: the underside of the head is relieved so the thread runs up close against it, letting very short screws grip over nearly their full length in thin material — 3/16 in at #4, 5/16 in at #10, 7/16 in at 1/4, 9/16 in at 3/8. Longer screws carry a full shank between thread and head. If your joint is thin and you need maximum thread engagement at short length, ask for the undercut form explicitly on the RFQ.

Why does the table quote only selected sizes?

Every figure above is quoted verbatim from the collected ASME B18.6.3 table at sizes where the dimension columns are complete and consistent. A few cells elsewhere in the collected source carry transcription artefacts (for example a head-diameter maximum printed with a stray leading digit), so this page does not reproduce those cells rather than guess between them. Sizes not quoted are standard ASME B18.6.3 parts and are confirmed dimension-for-dimension against the standard table at quotation.

What is the MOQ and lead time for these inch machine screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock gauge sizes, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these inch machine screws state?

State the standard designation (ASME B18.6.3 — often still called ANSI B18.6.3), gauge size and threads per inch (for example #4-40, #10-24, 1/4-20 UNC), length and head style, material and grade (steel or stainless; state the stainless grade such as 18-8/A2 or 316/A4 if specified), finish (plain, zinc plated, or other), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ASME B18.6.3 UNC Slotted 82° Flat Countersunk Machine Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ASME B18.6.3 UNC Slotted 82° Flat Countersunk Machine Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.