ANSI B18.3 Hex Socket Set Screws, Flat Point
ANSI/ASME B18.3 hex socket set screws with flat point, #0 to 2 in — the grub screw for finished surfaces and re-adjustable settings — with the collected 24-size table: UNC/UNF/UNEF thread options, socket size, socket depth and flat point diameter d p.
Last updated: 2026-11
Specifications
The flat-point set screw ends in a shallow cone truncated to a flat circular face of diameter d p, so it presses on the mating surface instead of digging into it. That is the point style to choose whenever the screw will be re-adjusted, whenever it bears against a hardened or finished surface a cup would scar, or whenever it clamps a second part against a shaft rather than biting the shaft itself — spacer collars, adjustable stops, guide bushings, set-and-reset tooling details. The trade is holding power: without a biting edge the screw relies on friction alone, so it wants a harder tightening torque and, in vibrating service, a thread locker. The collected B18.3 table runs 24 sizes from #0 to 2 in and tabulates per size: screw diameter with thread length, threads per inch across UNC, UNF and (from 1/4 in) UNEF, the hex socket nominal size s, minimum socket depth t, and the flat point diameter d p with max/min limits — the number that decides how much bearing area the flat actually delivers. Cup, dog and cone point variants of the same series have their own pages on this site.
| Standard | ANSI/ASME B18.3 — hex socket set screws, flat point (inch series) |
|---|---|
| Series | #0 – 2 in (24 sizes tabulated); UNC/UNF/UNEF per size |
| Tabulated geometry | Per size: nominal diameter d with thread length, threads per inch by series (UNC / UNF / UNEF), socket nominal size s, socket depth t (min), flat point diameter d p (max / min) |
| At 1/4 | UNC 20 / UNF 28 / UNEF 32; socket s 0.125 in; depth t min 0.125 in; flat d p 0.132 / 0.118 in |
| At 1/2 | UNC 13 / UNF 20 / UNEF 28; socket s 0.25 in; depth t min 0.25 in; flat d p 0.291 / 0.270 in |
| At 1 | UNC 8 / UNF 12 / UNEF 20; socket s 0.562 in; depth t min 0.562 in; flat d p 0.609 / 0.579 in |
| Materials / strength | Not tabulated by the collected specification — per RFQ (hardness and finish per drawing callout; set screws are normally through-hardened) |
| Nominal size | Screw dia — basic (in) | Threads per in. — UNC | Threads per in. — UNF | A max — body dia (in) | C UNC — 3A major dia min (in) | C UNF — 3A major dia min (in) | C max — point dia (in) | C min — point dia (in) |
|---|---|---|---|---|---|---|---|---|
| #0 | .0600 | – | 80 | .0600 | – | .0568 | .033 | .027 |
| #1 | .0730 | 64 | 72 | .0730 | .0692 | .0695 | .040 | .033 |
| #2 | .0860 | 56 | 64 | .0860 | .0819 | .0822 | .047 | .039 |
| #3 | .0990 | 48 | 56 | .0990 | .0945 | .0949 | .054 | .045 |
| #4 | .1120 | 40 | 48 | .1120 | .1069 | .1075 | .061 | .051 |
| #5 | .1250 | 40 | 44 | .1250 | .1199 | .1202 | .067 | .057 |
| #6 | .1380 | 32 | 40 | .1380 | .1320 | .1329 | .074 | .064 |
| #8 | .1640 | 32 | 36 | .1640 | .1580 | .1585 | .087 | .076 |
| #10 | .1900 | 24 | 32 | .1900 | .1825 | .1840 | .102 | .088 |
| 1/4 | .2500 | 20 | 28 | .2500 | .2419 | .2435 | .132 | .118 |
| 5/16 | .3125 | 18 | 24 | .3125 | .3038 | .3053 | .172 | .156 |
| 3/8 | .3750 | 16 | 24 | .3750 | .3656 | .3678 | .212 | .194 |
| 7/16 | .4375 | 14 | 20 | .4375 | .4272 | .4294 | .252 | .232 |
| 1/2 | .5000 | 13 | 20 | .5000 | .4891 | .4919 | .291 | .207 |
| 9/16 | .5625 | 12 | 18 | .5625 | .5511 | .5538 | .332 | .309 |
| 5/8 | .6250 | 11 | 18 | .6250 | .6129 | .6163 | .371 | .347 |
| 3/4 | .7500 | 10 | 16 | .7500 | .7371 | .7406 | .450 | .425 |
| 7/8 | .8750 | 9 | 14 | .8750 | .8611 | .8647 | .530 | .502 |
| 1 | 1.0000 | 8 | 12 | 1.0000 | .9850 | .9886 | .609 | .579 |
| 1 1/8 | 1.1250 | 7 | 12 | 1.1250 | 1.1086 | 1.1136 | .689 | .655 |
| 1 1/4 | 1.2500 | 7 | 12 | 1.2500 | 1.2336 | 1.2386 | .767 | .733 |
| 1 3/8 | 1.3750 | 6 | 12 | 1.3750 | 1.3568 | 1.3636 | .848 | .808 |
| 1 1/2 | 1.5000 | 6 | 12 | 1.5000 | 1.4818 | 1.4886 | .926 | .886 |
- Row 10 (1/4): the #10 UNC thread-limit cell prints .1825 where the ASME B1.1 class 3A minimum for 10-24 UNC is .1828 — carried as printed, not normalized; verify per RFQ against the governing thread standard.
- Row 14 (1/2): the 1/2 size point-diameter minimum prints .207 while the published ASME B18.3 point-diameter minimum for 1/2 is .270 (the maximum .291 agrees) — carried as printed, not normalized; confirm per RFQ against the governing standard.
- Row 18 (7/8): the 7/8 size prints 9 UNC threads per inch with thread-limit .8611, consistent with the 9UN series; the 1 in. and 12-thread sizes above follow the same UN-series pattern — carried as printed.
Materials
- Material, hardness and finish specified per RFQ — the collected specification table covers geometry only
Ordering & documentation
Documents
Shipments of ANSI B18.3 Hex Socket Set Screws, Flat Point are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ANSI B18.3 Hex Socket Set Screws, Flat Point orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.
Quotation
- The product family (ANSI B18.3 Hex Socket Set Screws, Flat Point), product standard/designation and drawing or part number.
- The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
- Material/grade, heat-treatment condition and surface finish, together with the service environment.
- Quantity per size, delivery destination and required test or traceability documents.
Sample & supply
Minimum order quantity for ansi b18.3 hex socket set screws, flat point is 10,000 pieces (applies to the standard sizes and finishes for ansi b18.3 hex socket set screws, flat point; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for ansi b18.3 hex socket set screws, flat point run 3–7 days. Quantities or variants of ansi b18.3 hex socket set screws, flat point outside the standard range are confirmed at quotation.
Storage & shipping
ANSI B18.3 Hex Socket Set Screws, Flat Point are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store ansi b18.3 hex socket set screws, flat point dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.
Frequently asked questions
Flat point or cup point — how should the choice be made?
Decide on two questions: will the screw ever be re-tightened, and what does it press against. The cup point bites a sharp ring into the shaft — maximum holding for a set-once joint, but it scars the surface and loses bite every time it is re-seated on the same mark. The flat point presses a defined circular face (d p) — no bite, but no damage either, which is why it is the choice for adjustable stops, parts that get repositioned, and any surface harder than the screw itself, where a cup would simply skip. If the joint sees vibration with a flat point, plan for a thread locker or a key, because the screw holds by friction alone. Compare the d p and d z columns at the same size and they are nearly identical — the geometry differs at the very tip, so the decision is service, not size.
What is the MOQ and lead time for these screws?
Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.
What is the MOQ and lead time for ANSI B18.3 Hex Socket Set Screws, Flat Point?
Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.
What should an RFQ for ANSI B18.3 Hex Socket Set Screws, Flat Point state?
State the full designation (ANSI/ASME B18.3), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.
Related knowledge
- Thread-Forming vs Thread-Cutting vs Thread-Rolling Self-Tapping Screws: What the Evidence Settles on Base Material
- Screw Family Selection by Base Material: Wood, Machine and Self-Tapping Threads, Engagement and Coating
- Hex Bolts vs Socket Head Cap Screws: What the Evidence Settles on Strength, Clearance and Cost
Request a Quote
Get factory-direct pricing from the manufacturer.
What to include in your ANSI B18.3 Hex Socket Set Screws, Flat Point inquiry
- ✓ Identify the screw type and standard, including head style and drive recess.
- ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
- ✓ State the material/property class, substrate material and thickness, and required coating or finish.
- ✓ Describe installation, locking or removal requirements, quantity and destination.
- ✓ Factory-direct pricing for your ANSI B18.3 Hex Socket Set Screws, Flat Point
- ✓ Standard and custom specifications
- ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
- ✓ Full fastener family support