Plymetal TEK Self-Drilling Screws (Plywood-to-Metal)

Plymetal TEK self-drilling screws as printed by the collected special-purpose table: No. 10 diameter drilling material up to .175" max, fastening plywood or composite over 1/2" to metal.

Last updated: 2026-11

Request a Quote

Plymetal TEK Self-Drilling Screws (Plywood-to-Metal) in an industrial setting
Illustrative image redrawn from real Plymetal TEK Self-Drilling Screws (Plywood-to-Metal) product references — not a photograph of stocked items.

Specifications

The Plymetal TEK class is named for the pairing it serves: plywood or composite board over 1/2" thick fastened down to metal. The collected table gives it a No. 10 diameter and a material window running to .175" max — the metal side of the stack, which is what the drill point has to pierce before the threads carry into it. That window covers deck plate and light structural metal; the wood side needs no drilling, which is why the thickness column is bounded on the metal only. This is the construction screwed through when fixing roof ply, composite panelling or insulation boards onto steel framing or deck. The collected table prints no drill-point length for this class; point geometry is confirmed against the panel system at quotation.

Point class Plymetal Teks — special-purpose class, label as printed by the collected table
Screw sizes (tabulated) No. 10
Material window To .175" max (the drilled metal side of the stack)
Application pairing Plywood or composite (over 1/2") to metal — pairing printed by the collected table
Drill-point length Not printed for this class — confirmed at quotation
Materials Case-hardened carbon steel with corrosion-resistant plating is the standard construction for inch TEK self-drillers; stainless (410) and other finishes confirmed at quotation
Plymetal Teks - special-purpose class (as printed)Window = recommended material thickness, cold-rolled steel sheet. Drill-point length not printed by the source for this class.
Screw diameterRecommended material thicknessApplication pairing (as printed)
No. 10To .175 max.Plywood or composite (over 1/2") to metal

Materials

  • Case-hardened carbon steel with corrosion-resistant plating is the standard construction for inch TEK self-drillers; stainless (410) and other finishes confirmed at quotation

Ordering & documentation

Documents

Shipments of Plymetal TEK Self-Drilling Screws (Plywood-to-Metal) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Plymetal TEK Self-Drilling Screws (Plywood-to-Metal) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Plymetal TEK Self-Drilling Screws (Plywood-to-Metal)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for plymetal tek self-drilling screws (plywood-to-metal) is 10,000 pieces (applies to the standard sizes and finishes for plymetal tek self-drilling screws (plywood-to-metal); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for plymetal tek self-drilling screws (plywood-to-metal) run 3–7 days. Quantities or variants of plymetal tek self-drilling screws (plywood-to-metal) outside the standard range are confirmed at quotation.

Storage & shipping

Plymetal TEK Self-Drilling Screws (Plywood-to-Metal) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store plymetal tek self-drilling screws (plywood-to-metal) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Plymetal TEK or Plymetal TEK with Wings — how do they split the work?

By what the board side is made of. The collected table gives the plain Plymetal class the plywood/composite-over-metal pairing with the metal window running to .175" max. The with-wings variant keeps the same No. 10 core screw but adds cutting wings and an explicitly printed minimum — .089" min to .175" max — and its pairing is drywall to metal or wood. The wings ream the board layer so the threads pull the board tight against the substrate without spoiling its face; the printed minimum exists because a winged screw needs enough metal in the stack for the point to do its work after the wings cut off. Match the page to your board material and check the .089" floor before ordering the winged variant.

What is the MOQ and lead time for these self-drilling screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these special-purpose TEK screws state?

State the point class (Stitch, Plymetal, Plymetal with Wings, Drywall or Gypsum TEK), the screw diameter from the class table, the base material it drills into and the total thickness or gauge of the stack, head form and drive, length, finish (for example zinc plated or 410 stainless), required certificates such as a mill test report per EN 10204 3.1, and quantity per size — plus destination country.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Plymetal TEK Self-Drilling Screws (Plywood-to-Metal) inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your Plymetal TEK Self-Drilling Screws (Plywood-to-Metal)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.