ISO 724 Metric Thread Basic Dimensions (M1.6 - M100)

ISO 724 basic thread dimensions for the general-purpose coarse series, M1.6 - M100: pitch, basic major diameter d = D, basic pitch diameter d2 = D2 and basic internal minor diameter D1 per size — the theoretical thread geometry behind stress-area and tapping calculations.

Last updated: 2026-11

Request a Quote

ISO 724 Metric Thread Basic Dimensions (M1.6 - M100) in an industrial setting
Illustrative image redrawn from real ISO 724 Metric Thread Basic Dimensions (M1.6 - M100) product references — not a photograph of stocked items.

Specifications

Basic dims are the thread before tolerances: the theoretical values a perfect thread holds, and the numbers most design calculations want. This collected page tabulates ISO 724 for the general-purpose coarse series across 34 sizes, M1.6 (0.35 pitch) through M100 (6 pitch): basic pitch P, basic major d = D (the nominal, printed without trailing zeros on integer sizes as the source does), basic pitch diameter d2 = D2 (M6: 5.350; M12: 10.863; M30: 27.727; M64: 60.103), and basic internal minor D1 (M6: 4.917; M12: 10.106; M64: 57.505). The D1 column is the tapping-theory anchor — drill sizes derive from it — and the d2 column feeds every stress-area and thread-stripping calculation (the tensile-stress-area ladder on our metric-thread-stress page builds on these values). Three companions in this family complete the picture: the ISO 965 page adds the tolerance system, the legacy BS 3643 ladder adds the 6g/6H manufacturable bands, and the ISO 262 page (pitch selection) already covers which pitch pairs with which size. The page's own standards index is carried as the first table. Materials and strength are not tabulated — per RFQ.

Size range M1.6 - M100 coarse series, 34 sizes: pitch 0.35 (M1.6) to 6 (M64 - M100)
Basic pitch diameter d2 = D2 M1.6: 1.373; M6: 5.350; M12: 10.863; M30: 27.727; M100: 96.103
Basic internal minor D1 M1.6: 1.221; M6: 4.917; M12: 10.106; M30: 26.211; M100: 93.505
Notation mm; integer major diameters print without trailing zeros (e.g. "2", "3") — carried verbatim
Companions ISO 965 tolerance classes, legacy BS 3643 6g/6H limits ladder, ISO 262 pitch selection — all in this family
Not tabulated Tolerance bands, limits of size, fine-pitch series, thread strength — per RFQ
Standards index (current ISO editions)As printed on the collected page: ISO 724 basic thread dims in mm (basic values, not limits); basic major dia prints without trailing zeros on integer sizes (e.g. "2", "3") — carried verbatim. Verification: token-for-token equal to the x127 corpus (live-DOM capture 2026-11-01).
StandardEngineering purpose
ISO 68-1:2023Basic and design profiles for metric screw threads.
ISO 261:1998General plan of diameter/pitch combinations.
ISO 262:2023Selected commercial fastener sizes from M1 to M100.
ISO 724:2023Basic dimensions.
ISO 965-1:2026Tolerance system, positions, grades, recommended classes and designation.
ISO 965-2:2024Limits of sizes for 6H/6g from M1.6 to M100 and 5H/6h from M1 to M1.4.
ISO 724 metric thread basic dimensions (M1.6 - M100)As printed on the collected page: ISO 724 basic thread dims in mm (basic values, not limits); basic major dia prints without trailing zeros on integer sizes (e.g. "2", "3") — carried verbatim. Verification: token-for-token equal to the x127 corpus (live-DOM capture 2026-11-01).
ThreadPitch P mmBasic major diameter d = D mmBasic pitch diameter d 2 = D 2 mmBasic internal minor diameter D 1 mm
M1.60.351.61.3731.221
M1.80.351.81.5731.421
M20.421.7401.567
M2.20.452.21.9081.713
M2.50.452.52.2082.013
M30.532.6752.459
M3.50.63.53.1102.850
M40.743.5453.242
M4.50.754.54.0133.688
M50.854.4804.134
M6165.3504.917
M7176.3505.917
M81.2587.1886.647
M101.5109.0268.376
M121.751210.86310.106
M1421412.70111.835
M1621614.70113.835
M182.51816.37615.294
M202.52018.37617.294
M222.52220.37619.294
M2432422.05120.752
M2732725.05123.752
M303.53027.72726.211
M333.53330.72729.211
M3643633.40231.670
M3943936.40234.670
M424.54239.07737.129
M4854844.75242.587
M565.55652.42850.046
M6466460.10357.505
M7267268.10365.505
M8068076.10373.505
M9069086.10383.505
M100610096.10393.505

Materials

  • Basic dims are material-independent. What pairs with them in practice: tapping a D1-derived drill into the softer of the two mating materials, and specifying thread class so the manufactured bands (not these theoretical values) govern acceptance. RFQ threaded parts with size, pitch and class; calculation-grade thread data requests are welcome through the inquiry line

Ordering & documentation

Documents

Shipments of ISO 724 Metric Thread Basic Dimensions (M1.6 - M100) are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 724 Metric Thread Basic Dimensions (M1.6 - M100) orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 724 Metric Thread Basic Dimensions (M1.6 - M100)), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for iso 724 metric thread basic dimensions (m1.6 - m100) is 10,000 pieces (applies to the standard sizes and finishes for iso 724 metric thread basic dimensions (m1.6 - m100); mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 724 metric thread basic dimensions (m1.6 - m100) run 3–7 days. Quantities or variants of iso 724 metric thread basic dimensions (m1.6 - m100) outside the standard range are confirmed at quotation.

Storage & shipping

ISO 724 Metric Thread Basic Dimensions (M1.6 - M100) are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 724 metric thread basic dimensions (m1.6 - m100) dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

These are called "basic" dimensions — how do they relate to the actual measured size of a bolt or nut?

A real fastener never sits exactly on the basic values — it lives inside tolerance bands that hang off them. For the external thread, the whole band sits below basic (the 6g fundamental deviation pulls it down so the bolt clears the nut); for the internal thread the band starts at basic and goes up (6H). On the pitch diameter at M10 x 1.5: basic is 9.026 on this page, while the manufactured 6g bolt band is 8.862 - 8.994 and the 6H nut band is 9.026 - 9.198 — both traceable on the companion tolerance pages. That is why you measure a brand-new M10 bolt at ~9.97 mm across the threads, not 10.000: the major-diameter band (9.732 - 9.968) is deliberately below nominal. Use this page for the design-side numbers (stress areas, drill selection, clearance-hole sizing), and the tolerance pages for manufacture and gauging — mixing a basic value into a fit calculation is the usual way double-clearance errors creep in.

What is the MOQ and lead time for ISO 724 Metric Thread Basic Dimensions (M1.6 - M100)?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for ISO 724 Metric Thread Basic Dimensions (M1.6 - M100) state?

State the full designation (ISO 724 Metric Thread Basic Dimensions (M1.6 - M100)), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 724 Metric Thread Basic Dimensions (M1.6 - M100) inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ISO 724 Metric Thread Basic Dimensions (M1.6 - M100)
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.