Metric Clearance Hole Sizes (ASME B18.2.8) — Close, Normal, Loose

Metric clearance hole chart M1.6 to M100: close, normal and loose fit classes with nominal drill size and hole diameter min/max per thread size — the metric side of the ASME B18.2.8 clearance system.

Last updated: 2026-11

Request a Quote

Metric Clearance Hole Sizes (ASME B18.2.8) — Close, Normal, Loose in an industrial setting
Illustrative image redrawn from real Metric Clearance Hole Sizes (ASME B18.2.8) — Close, Normal, Loose product references — not a photograph of stocked items.

Specifications

The metric half of the B18.2.8 clearance system runs M1.6 through M100: per thread size, three fit classes (close, normal, loose), each carrying the nominal drill size and the hole diameter min/max band. The ladder opens at M1.6 (normal: 1.8 drill, 1.8/1.94 band; close: 1.7, 1.7/1.8; loose: 2, 2/2.25) and climbs through the full metric series — the class deltas widen as sizes grow, which is why the loose fit matters most on big structural holes where punched and thermal-movement conditions dominate. Pairs with the inch chart as the same-named fit-class system; keep both pages in view on mixed-unit projects so a "normal fit" callout means the same clearance philosophy on both sides of the drawing.

Standard / scope ASME B18.2.8 clearance holes, metric fasteners M1.6-M100 — fit classes close, normal, loose; per class nominal drill size and hole diameter min/max
Ladder start M1.6: close 1.7 drill (1.7/1.8), normal 1.8 (1.8/1.94), loose 2.0 (2/2.25) — continuing through M2 (2.2/2.4/2.6 drills) as tabulated
Reading the columns Per size: Nominal Drill Size + Hole Diameter Min./Max. per fit class — stacked header rows carried as printed
Ladder end Runs to M100 — the large-diameter rows are the structural and heavy-equipment range
Not tabulated Countersink/counterbore combinations, positional tolerancing of the hole pattern — per RFQ / drawing
Metric clearance hole sizes, close/normal/loose fits (ASME B18.2.8) (table 1 of 1)mm. Per fit class: nominal drill size and hole diameter min/max. Stacked header rows carried as printed grid rows.
Metric Clearance Holes Chart
Nominal Screw SizeFit Class - NormalFit Class - CloseFit Class - Loose
Nominal Drill SizeHole DiameterNominal Drill SizeHole DiameterNominal Drill SizeHole Diameter
Min.Max.Min.Max.Min.Max.
M1.61.81.81.941.71.71.8222.25
M22.42.42.542.22.22.32.62.62.85
M2.52.92.93.042.72.72.83.13.13.4
M33.43.43.583.23.23.323.63.63.9
M44.54.54.684.34.34.424.84.85.1
M55.55.55.685.35.35.425.85.86.1
M66.66.66.826.46.46.55777.36
M8999.228.48.48.55101010.36
M10111111.2710.510.510.68121212.43
M1213.513.513.77131313.1814.514.514.93
M1415.515.515.77151515.1816.516.516.93
M1617.517.517.77171717.1818.518.519.02
M20222222.33212121.21242424.52
M24262626.33252525.21282828.52
M30333333.39313131.25353535.62
M36393939.39373737.25424242.62
M42454545.39434343.25484848.62
M48525252.46505050.25565656.74
M56626262.46585858.3666666.74
M64707070.46666666.3747474.74
M72787878.46747474.3828282.87
M80868686.54828282.35919191.87
M90969696.54939393.35101101101.87
M100107107107.54104104104.35112112112.87

Materials

  • Metric fabrication drawings usually inherit the fit-class convention from this standard or the ISO drafting equivalents — the values here are the check. Fastener supply follows the drawing's hole, not the reverse: if the shop holds loose-fit practice, washers sized for the loose hole keep the bearing seat; if close-fit, expect bolt-and-hole selection gauging at assembly. State the fit class next to every hole callout on RFQ fabrication packages — it is the single most-missed note on outsourced plate work

Ordering & documentation

Documents

Shipments of Metric Clearance Hole Sizes (ASME B18.2.8) — Close, Normal, Loose are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for Metric Clearance Hole Sizes (ASME B18.2.8) — Close, Normal, Loose orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (Metric Clearance Hole Sizes (ASME B18.2.8) — Close, Normal, Loose), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for metric clearance hole sizes (asme b18.2.8) — close, normal, loose is 10,000 pieces (applies to the standard sizes and finishes for metric clearance hole sizes (asme b18.2.8) — close, normal, loose; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for metric clearance hole sizes (asme b18.2.8) — close, normal, loose run 3–7 days. Quantities or variants of metric clearance hole sizes (asme b18.2.8) — close, normal, loose outside the standard range are confirmed at quotation.

Storage & shipping

Metric Clearance Hole Sizes (ASME B18.2.8) — Close, Normal, Loose are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store metric clearance hole sizes (asme b18.2.8) — close, normal, loose dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

Do the fit classes mean the same thing as on the inch chart?

Yes — the philosophy is shared: close for aligned drilled work, normal as the default, loose for punched/drifted and movement-absorbing holes. The numbers differ per series because the bolt diameter ladders differ, but the relative spacing (a drill a few tenths up for close, several for loose) carries across. On mixed-unit projects this is the trap: a "normal" hole called out in inches and one in millimetres are both normal fit, but a shop translating between them by eye will drift — reference the chart per series and keep the class name literal on every drawing.

At what size does the loose fit become structurally necessary?

Not at a single size — it follows the hole-making method, but the stakes grow with diameter: large punched or flame-cut holes can exceed the normal band by more than the bolt's bearing width can forgive, and thick plate stacks accumulate misalignment that only the loose class absorbs. From the mid-ladder upward (where this chart's loose drills jump well clear of the bolt), expect loose fit plus a structural washer as the standard pairing on steelwork. The chart's min/max bands per class are the acceptance lines either way — measure the hole, not the intention.

What is the MOQ and lead time for Metric Clearance Hole Sizes (ASME B18.2.8) — Close, Normal, Loose?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for Metric Clearance Hole Sizes (ASME B18.2.8) — Close, Normal, Loose state?

State the full designation (Metric Clearance Hole Sizes (ASME B18.2.8) — Close, Normal, Loose), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your Metric Clearance Hole Sizes (ASME B18.2.8) — Close, Normal, Loose inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your Metric Clearance Hole Sizes (ASME B18.2.8) — Close, Normal, Loose
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.