TX24 5-Lobe Pin TX Countersunk Security Machine Screws

Countersunk head 5-lobe pin TX security machine screws, M3–M8 as tabulated: head diameters 5.7–16.8 mm, head heights 1.7–4.4 mm. Material-coded availability matrix from 6 mm to 40 mm; A2 and A4-70 stainless steel, zinc-plated steel to order.

Last updated: 2026-11

Request a Quote

TX24 5-Lobe Pin TX Countersunk Security Machine Screws in an industrial setting
Illustrative image redrawn from real TX24 5-Lobe Pin TX Countersunk Security Machine Screws product references — not a photograph of stocked items.

Specifications

TX24 is the flush machine-thread member of the 5-lobe line: a countersunk head that disappears into a 90° seat, leaving only the five-lobed, centre-pinned recess visible — the collected page describes the 5-lobe geometry as reminiscent of a flower petal, more secure than the common 6-lobe pin TX because the design is less readily available. The collected tabulation runs M3 to M8 with head diameters 5.7–16.8 mm and head heights 1.7–4.4 mm; as on TX09, the M3 row lists no tool size, so no M3 tool claim is made here. Supply is stated in A2 and A4-70 stainless steel with steel zinc plated available to order, and the page notes the button-head 5-lobe pin TX screws (TX09) as the proud-head alternative on the same drive. The availability matrix is material-coded cell by cell across 6–40 mm: M4–M6 mark broadly (M5/M6 continuously from 6 to 40 mm), M3 marks only at 6, 10 and 12 mm, and M8 enters from 16 mm upward — the machine-thread route to a flush 5-lobe fixing on tapped holes and nuts, from instrument panels to public-facing joinery.

Designation TX24 — countersunk head security machine screw, 5-lobe pin TX drive; seats flush in a 90° countersink, matched restricted insert bit (button-head alternative: TX09)
Thread range (tabulated) M3, M4, M5, M6, M8
Head diameter dk per thread (mm) M3 5.7 · M4 7.8 · M5 7.8 · M6 11.8 · M8 16.8
Head height k per thread (mm) M3 1.7 · M4 2.3 · M5 2.8 · M6 3.3 · M8 4.4
Tool size (collected) No.1 (M4) · No.2 (M5, M6) · No.2.5 (M8); no tool size listed for M3
Length availability (as marked) M3 6, 10, 12 · M4 6–25 · M5/M6 6–40 continuous · M8 16–40; unmarked pairs confirmed at quotation — Availability matrix legend (as collected): stainless-triangle marker = A2 stainless steel; black-triangle marker = A4-70 stainless steel
Security principle Reusable two-way fixing; more secure than 6-lobe pin TX as the design is less readily available; higher-torque capable per the collected page

Materials

  • A2 stainless steel
  • A4-70 stainless steel
  • Steel, zinc plated (to order)

Ordering & documentation

Documents

Shipments of TX24 5-Lobe Pin TX Countersunk Security Machine Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for TX24 5-Lobe Pin TX Countersunk Security Machine Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (TX24 5-Lobe Pin TX Countersunk Security Machine Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for tx24 5-lobe pin tx countersunk security machine screws is 10,000 pieces (applies to the standard sizes and finishes for tx24 5-lobe pin tx countersunk security machine screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for tx24 5-lobe pin tx countersunk security machine screws run 3–7 days. Quantities or variants of tx24 5-lobe pin tx countersunk security machine screws outside the standard range are confirmed at quotation.

Storage & shipping

TX24 5-Lobe Pin TX Countersunk Security Machine Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store tx24 5-lobe pin tx countersunk security machine screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

TX24 or TX09 — flush or button on a machine-thread joint?

The joint face answers it. TX24 needs a countersunk mating surface and rewards it with a completely flush, anonymous finish — the specification-friendly choice on access panels and public joinery. TX09 sits proud on a plain hole, tolerates thin or unprepared faces, and its button dome carries a broader bearing. Both run the same 5-lobe pin drive and the same restricted bits, and both cover M3–M8; the collected matrixes differ mainly at the extremes — TX09 reaches 100 mm on M8 in A4-70, TX24 tops out at 40 mm.

Why does the M5 row show the same 7.8 mm head diameter as M4?

Because that is what the collected table prints: dk 7.8 on both M4 and M5, then a step to 11.8 mm at M6. It is an unusual progression in the family — most countersunk lines grow head diameter with every gauge — but this page renders the source verbatim rather than smoothing it. If your detail depends on the M5 head diameter, confirm it at quotation before cutting countersinks.

What is the MOQ and lead time for these security screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; unmarked matrix pairs, zinc-plated steel on request, and specials made to order are quoted with a confirmed schedule. Confirm the exact schedule against quantity and size mix at quotation.

What should an RFQ for these security screws state?

State the designation code and head style, the drive (5-lobe pin TX or 7-lobe pin — matched restricted insert bits required), thread or tapping size and length, the material marker you expect (A2 or A4-70 stainless; zinc-plated steel on request), the substrate or mating part, required certificates, and quantity per size — plus destination country. If you are matching existing fixings, name the drive generation explicitly: 5-lobe, 6-lobe and 7-lobe pin bits are not interchangeable.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your TX24 5-Lobe Pin TX Countersunk Security Machine Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your TX24 5-Lobe Pin TX Countersunk Security Machine Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.