DIN 427 Slotted Head Screws with Shank

DIN 427 slotted cheese head screws with shank, M1 to M20 — the precision shanked variant whose unthreaded shank is drawn to tighter limits for location — with the full collected 18-size table from M1 to M20: shank limits, slot geometry and thread lengths.

Last updated: 2026-11

Request a Quote

DIN 427 Slotted Head Screws with Shank in an industrial setting
Illustrative image redrawn from real DIN 427 Slotted Head Screws with Shank product references — not a photograph of stocked items.

Specifications

DIN 427 is the slotted cheese head screw made for precision assembly: below the head it carries a ground-feel unthreaded shank — the d s column — so the screw can pass through and positively locate mating parts before the thread engages, and the collected table gives that shank its own limit bands because the fit, not just the clamp, is the function. This is the screw for fixtures and guides where repeated disassembly must not chew a clearance hole: the shank pilots the parts, the thread draws them together. The collected table is unusually deep — M1 to M20, well past the M10 ceiling of most machine-screw standards — and tabulates per size: thread length b with its min=nominal / max band, shank d s (max=nominal / min), slot width n as Nominal with min/max limits, slot depth t (max / min), the d f feature, head runout U and thread-end lash x. The shanked counterpart to the fully threaded DIN 84 cheese head: specify DIN 427 where the joint needs a pilot, and check the d s band against your clearance hole, not just the nominal. Materials, property classes and finishes are not printed by the collected specification and follow the drawing callout.

Standard DIN 427 — slotted head (cheese head) screws with shank (unthreaded shank portion)
Series M1 – M20 (18 sizes tabulated, including (M3.5), (M14), (M18))
Tabulated geometry Per size: pitch P, thread length b (min=nominal / max), shank d s (max=nominal / min), slot width n (Nominal / min / max), slot depth t (max / min), d f, head runout U max, thread-end lash x max
Dimensions at M6 Thread b 7.2 min / 9.2 max; shank d s max=nominal 6 / min 5.82; slot n nominal 1 (1.06–1.2); slot depth t 1.6–2; d f 4.8; runout U max 2; lash x max 2.5
Dimensions at M12 Thread b 14 min / 17.5 max; shank d s max=nominal 12 / min 11.73; slot n nominal 2 (2.06–2.31); slot depth t 2.8–3.7; d f 9.6; runout U max 3.5; lash x max 4.375
Shank Unthreaded shank with defined d s limit band pilots mating parts before thread engagement
Materials / strength Not tabulated by the collected specification — per RFQ (property class and finish per drawing callout)

Materials

  • Material, property class and finish specified per RFQ — the collected specification table covers geometry only

Ordering & documentation

Documents

Shipments of DIN 427 Slotted Head Screws with Shank are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for DIN 427 Slotted Head Screws with Shank orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (DIN 427 Slotted Head Screws with Shank), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for din 427 slotted head screws with shank is 10,000 pieces (applies to the standard sizes and finishes for din 427 slotted head screws with shank; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for din 427 slotted head screws with shank run 3–7 days. Quantities or variants of din 427 slotted head screws with shank outside the standard range are confirmed at quotation.

Storage & shipping

DIN 427 Slotted Head Screws with Shank are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store din 427 slotted head screws with shank dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When does a shanked cheese head screw (DIN 427) beat the fully threaded DIN 84?

When the joint is re-assembled often or needs to locate, not just clamp. A fully threaded screw leaves thread crests rubbing in the clearance hole on every insertion, gradually cutting the hole oversize and degrading any positional accuracy the joint had; the DIN 427 shank slides through with only the smooth d s cylinder contacting the hole, so the parts pilot positively and the hole survives the service life. The cost is grip: the thread only engages over the b length, so the clamped stack must sit within that thread or the screw cannot close. Check the two columns together at quotation — thread length b against your clamped thickness, and shank limit d s against your hole — because a shanked screw specified with a too-long grip length simply threads into the clearance hole and loses the very pilot function you paid for.

What is the MOQ and lead time for these screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.

What is the MOQ and lead time for DIN 427 Slotted Head Screws with Shank?

Orders under this designation have a minimum order quantity of 10,000 pieces. Stock items ship in 3–7 days. Final commercial terms are confirmed per quotation.

What should an RFQ for DIN 427 Slotted Head Screws with Shank state?

State the full designation (DIN 427), thread size and pitch or diameter, length or head dimension, finish, quantity per size, plus the destination country and any required certificate such as a mill test report per EN 10204 3.1; dimensions and schedule for this designation are confirmed with the quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your DIN 427 Slotted Head Screws with Shank inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your DIN 427 Slotted Head Screws with Shank
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.