ISO 4026 Flat Point Hex Socket Set Screws

ISO 4026 hex socket set screws with flat point, M1.6 to M24 — the residual-load set screw whose flat end bears against a flattened seating spot — with the full collected 13-size table: pitch, point diameter, hex socket geometry and key engagement.

Last updated: 2026-11

Request a Quote

ISO 4026 Flat Point Hex Socket Set Screws in an industrial setting
Illustrative image redrawn from real ISO 4026 Flat Point Hex Socket Set Screws product references — not a photograph of stocked items.

Specifications

The flat point is the set screw you specify when the clamped part must survive repeated adjustment: instead of digging a cup into the shaft, the flat end spreads its residual load over a flattened seating spot, so re-tightening does not deepen a scar and case-hardened or thin-walled mating parts are not punctured. ISO 4026 covers the standard metric series M1.6 to M24 with a hex socket drive — the same wrench sizes as the DIN 913 line it aligns with — and the collected table lists every size: pitch P, flat point diameter d p (max/min), minimum across-corners width e of the socket, key width s (nominal/max/min), and key engagement depth t. One reading note is reproduced from the source rather than resolved: the t values print as two rows carrying bare markers "1" and "2" with no legend on the collected page, so both rows are shown verbatim in the table below. The sibling pages of the same catalogue print the identical row structure labeled "short screw" and "long screw" (see the ISO 4027/4028/4029 tables), but for ISO 4026 itself the split is left uninterpreted. For the cup-point counterpart that maximizes holding power at the cost of a seating scar, see the ISO 4029 page on this site.

Standard ISO 4026 — hexagon socket set screws with flat point
Series M1.6 – M24 (13 sizes tabulated)
Tabulated geometry Per size: pitch P, point diameter d p max/min, socket across-corners e min, key width s nominal/max/min, key engagement t (two printed rows, labels "1"/"2", no published legend — reproduced verbatim)
Point style Flat point — bears on a flattened spot; lowest mating-part damage of the socket set-screw points, for repeated adjustment
Family note Metric counterpart of the flat-point socket set screw line (DIN 913); point-style siblings ISO 4027 cone, ISO 4028 dog, ISO 4029 cup
Materials / strength Not tabulated by the collected specification — per RFQ (property class and stainless grade per drawing callout)
ISO 4026 hex socket set screws with flat point - per-size dimensions (M1.6 - M24)All dimensions in millimeters. Attribute labels follow the source: P = thread pitch, d p = flat point diameter, e = minimum across-corners width of the hex socket, s = socket key width (hex size), t = minimum key engagement. The source prints the t row as two value rows carrying bare markers "1" and "2" in place of row labels, with no legend on the collected page — both rows are reproduced verbatim and not interpreted. Materials, property classes and length ranges are not tabulated by the collected specification.
Nominal threadP — pitch (mm)d p max (mm)d p min (mm)e min (mm)s nominal (mm)s max (mm)s min (mm)t min — printed row "1" (mm)t — printed row "2" (mm)
M1.60.350.80.550.8090.70.7240.710.71.5
M20.410.751.0110.90.9130.8870.81.7
M2.50.451.51.251.4541.31.31.2751.22
M30.521.751.7331.51.581.521.22
M40.72.52.252.30322.082.021.52.5
M50.83.53.22.8732.52.582.5223
M6143.73.44333.083.0223.5
M81.255.55.24.58344.0954.0235
M101.576.645.72355.145.0246
M121.758.58.146.86366.146.024.88
M1621211.579.14988.1758.0256.410
M202.51514.5711.4291010.17510.025812
M2431817.5713.7161212.21212.0321015
Hex socket set screws with flat point, metric - body diameter, point diameter and preferred length (M3 - M24)All dimensions in millimeters. Labels follow the source grid header chain: D max = body/shank diameter; J max = flat point diameter (matches the ISO 4026 dp max series exactly at all ten sizes); L preferred min = preferred minimum length. The source grid carries the flat, cone and dog point blocks side by side; only the flat block is shown here, and the cone and dog blocks are carried on their own pages. The grid starts at M3 — smaller metric sizes are not printed by this source. Values carried verbatim. The D max column prints 4.25 for M6 on this grid where the same guide’s cup-point grid (p.46) prints 4.35 — each grid is carried verbatim as printed.
Nominal sizeThread pitch (mm)D max — body dia (mm)J max — flat point dia (mm)L preferred min — flat point (mm)
M30.52.102.03.0
M40.72.752.53.0
M50.83.703.54.0
M61.004.254.04.0
M81.256.005.55.0
M101.507.407.06.0
M121.758.608.58.0
M162.0012.3512.012.0
M202.5016.0015.014.0
M243.0018.9518.020.0

Materials

  • Material, property class and finish specified per RFQ — the collected specification table covers geometry only

Ordering & documentation

Documents

Shipments of ISO 4026 Flat Point Hex Socket Set Screws are backed by Mill Test Certificate (MTC), Dimensional Report, Salt Spray Test Report on request, with full batch traceability from raw material to finished product. Quality management for ISO 4026 Flat Point Hex Socket Set Screws orders follows the owner-confirmed compliance list: ISO 9001:2015, RoHS, REACH. Exact document sets are confirmed on the order.

Quotation

  • The product family (ISO 4026 Flat Point Hex Socket Set Screws), product standard/designation and drawing or part number.
  • The dimensions that apply to this part — such as size, pitch, length, thickness, fit, grip or groove geometry.
  • Material/grade, heat-treatment condition and surface finish, together with the service environment.
  • Quantity per size, delivery destination and required test or traceability documents.

Sample & supply

Minimum order quantity for iso 4026 flat point hex socket set screws is 10,000 pieces (applies to the standard sizes and finishes for iso 4026 flat point hex socket set screws; mixed, special or custom variants are quoted — final commercial terms per quotation) Stock items for iso 4026 flat point hex socket set screws run 3–7 days. Quantities or variants of iso 4026 flat point hex socket set screws outside the standard range are confirmed at quotation.

Storage & shipping

ISO 4026 Flat Point Hex Socket Set Screws are packed for export and shipped factory-direct to buyers in Europe, Asia, the Americas and the Middle East. Store iso 4026 flat point hex socket set screws dry and protected until installation, and keep coated parts in their packaging until use; specific packing and preservation requirements can be stated on the order and confirmed at quotation.

Frequently asked questions

When does a flat point beat a cup point on a set screw?

When the clamped part is harder than the screw, thinner than the cup depth, or must be re-adjusted often. A cup point (ISO 4029) digs a ring into the mating surface — maximum resistance to rotation, but the scar grows with every re-tighten and the point can pierce thin walls. A flat point spreads the load on a small flat, so it is the standard choice against hardened shafts, for spacers and collars that get repositioned, and anywhere the mating face is finished. The trade is holding power: against smooth rotating loads, specify the cup point or add a key.

What should an RFQ for ISO 4026 set screws state?

The designation (ISO 4026), thread size, length, material and property class or stainless grade, finish, and quantity per size. The socket key widths and engagement depths are in the table so the assembly workstation can pick the right hex key; commercial terms follow the quotation.

What is the MOQ and lead time for these screws?

Minimum order quantity is 10,000 pieces per item. Stocked sizes ship in 3–7 days; non-stock diameters, lengths or finishes are quoted with a confirmed schedule. Common sizes in this designation are widely stocked — confirm the exact schedule against quantity and size mix at quotation.

Request a Quote

Get factory-direct pricing from the manufacturer.

What to include in your ISO 4026 Flat Point Hex Socket Set Screws inquiry

  • ✓ Identify the screw type and standard, including head style and drive recess.
  • ✓ Give nominal diameter, thread pitch, length and engagement or hole details where relevant.
  • ✓ State the material/property class, substrate material and thickness, and required coating or finish.
  • ✓ Describe installation, locking or removal requirements, quantity and destination.
  • ✓ Factory-direct pricing for your ISO 4026 Flat Point Hex Socket Set Screws
  • ✓ Standard and custom specifications
  • ✓ Factory-direct export to buyers in Europe, Asia, the Americas and the Middle East
  • ✓ Full fastener family support

We use your details only to answer this inquiry — see our Privacy notice for everything the form collects.